| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | |
| Benester 46 | Benasedo | Benester 46 is a linear, saturated, slightly branched non yellowing Polyester resin. It is suggested for increasing the polyester systems flexibility. It is also suggested for baking primers and topcoats used in can and coil - coating fields. | |
| BENESTER 5327 | Benasedo | BENESTER 5327 is a high – solids, slightly branched, saturated Polyester Resin. It is particularly suggested to increase flexibility of the polyesters resins in can and coil systems, crosslinked with amino-resins or blocked aliphatic polyisocyanates. | |
| Benester 694 | Benasedo | Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...展开 Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. 收起 | |
| Benester 910 | Benasedo | Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked ...展开 Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked aliphatic polyisocyanates so to guarantee good adhesion on alluminium and glavanized steel, for high-gloss and flexible exterior top-coats. 收起 | |
| BENESTER T 76 | Benasedo | BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphat...展开 BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphatic polyisocyanates, used in can and coilcoating industry where post-formability is required. 收起 | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...展开 BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. 收起 | |
| BEPD 70L | Perstorp | BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...展开 BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. 收起 | |
| Coronate® 2507 | Tosoh Corporation | Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起 | |
| Coronate® 2513 | Tosoh Corporation | Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起 | |
| Coronate® AP-M | Tosoh Corporation | Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起 | |
| Coronate® BI-301 | Tosoh Corporation | Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...展开 Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起 | |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films th...展开 CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. 收起 | Request Sample |
| Domopol 5131 65 SAB/BG ND | HELIOS RESINS | Domopol 5131 65 SAB/BG ND is a saturated polyester resin developed for high-durability exterior coil coating top coats and one coat systems. The bio-based content is 21% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS. | |
| Epotec® YD 010 S | Aditya Birla | Epotec® YD 010 S is a high molecular weight, unmodified, standard solid epoxy resin which displays excellent flexibility and good adhesion. This product is ideal for use in can coatings, tube & drum linings, and high performance primers. | |
| Epotec® YD 017 | Aditya Birla | Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters f...展开 Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. 收起 | |
| Epotec® YD 017S | Aditya Birla | Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufactu...展开 Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. 收起 | |
| Epotec® YD 019 | Aditya Birla | Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resist...展开 Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起 | |
| Epotec® YD 019S | Aditya Birla | Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and ...展开 Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起 | |
| Epotec® YD 126 | Aditya Birla | Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...展开 Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 127 | Aditya Birla | Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...展开 Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 128 | Aditya Birla | Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...展开 Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 128 ED | Aditya Birla | Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-dep...展开 Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primers and coatings, this product is also well-suited for use in various solvent-based & solvent-free coatings, can & coil coatings, and marine & industrial coatings. 收起 | |
| Epotec® YD 907 | Aditya Birla | Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coat...展开 Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coatings, and linings for tubes and drums. 收起 | |
| Epotec® YD 909 | Aditya Birla | Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical r...展开 Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起 | |
| Epotec® YDFM 250 | Aditya Birla | Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins...展开 Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 261LV | Aditya Birla | Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhe...展开 Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 262 | Aditya Birla | Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 269 | Aditya Birla | Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDPN 631 | Aditya Birla | Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings. | |
| Epotec® YDPN 638 | Aditya Birla | Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...展开 Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. 收起 | |
| Epotec® YDPN 638 MEK 80 | Aditya Birla | Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance....展开 Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is ideal for use in can, coil, marine, and protective coatings. 收起 | |
| Epotec® YDPN 638LV | Aditya Birla | Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...展开 Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. 收起 | |
| Epotec® YDPN 661 | Aditya Birla | Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings. | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| HOMAPE™ 4200-75 | Kito Chem | HOMAPE™ 4200-75 is a water-based polymer made of a modified polyester polymer solution. It is a transparent liquid with a light color that can impart good hardness and gloss to a variety of formulations. This additive is well suited for use in metal and g...展开 HOMAPE™ 4200-75 is a water-based polymer made of a modified polyester polymer solution. It is a transparent liquid with a light color that can impart good hardness and gloss to a variety of formulations. This additive is well suited for use in metal and glass paint needs good flexibility, especially suitable for coil coatings. 收起 | |
| HS9701 | Tianyi Chemical Engineering Material Co., Ltd. | HS9701, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in coil coatings, inks, and vacuum plating primers. This product wets pigments well and is resistant to boiling water. | |
| KEPERCAT®-543N | Kito Chem | KEPERCAT®-543N is an enclosed type amine salt of p-tsa catalyst, used as a cooling agent for paints. It has a low deblocking temperature and high catalytic efficiency. It is a colorless to yellowish transparent liquid formulated to improve the hardness an...展开 KEPERCAT®-543N is an enclosed type amine salt of p-tsa catalyst, used as a cooling agent for paints. It has a low deblocking temperature and high catalytic efficiency. It is a colorless to yellowish transparent liquid formulated to improve the hardness and processability of film under higher than normal temperatures without affecting the film appearance. It is suitable for use in solvent and water-based systems and especially in coil coating systems. 收起 | |
| KEPERCAT®-544N | Kito Chem | KEPERCAT®-544N is an acidic catalyst, curing accelerator made of an enclosed type amine salt of p-tsa. It is a colorless to yellowish transparent liquid that can effectively lower the deblocking temperature of most formulations. It is a strong acid type ...展开 KEPERCAT®-544N is an acidic catalyst, curing accelerator made of an enclosed type amine salt of p-tsa. It is a colorless to yellowish transparent liquid that can effectively lower the deblocking temperature of most formulations. It is a strong acid type that can be used in solvent or water-based systems.This additive is well suited for use in the production solvent and water-based coatings, especially coil coatings. 收起 | |
| KEPERDISP®-640 | Kito Chem | KEPERDISP®-640 is a wetting and dispersing agent made of a high molecular weight polyurethane solution. It is a commonly used dispersant, suitable for use in the dispersion of titanium dioxide, organic, inorganic pigments. It can be used to improve the tr...展开 KEPERDISP®-640 is a wetting and dispersing agent made of a high molecular weight polyurethane solution. It is a commonly used dispersant, suitable for use in the dispersion of titanium dioxide, organic, inorganic pigments. It can be used to improve the transparency in most matte paints, and is particularly useful in the production of wood, coil, and industrial coatings. 收起 | |
| KEPERSURF®-153 | Kito Chem | KEPERSURF®-153 is an anti-foaming, leveling agent made of an acrylic ester polymer. It is colorless to light yellow transparent liquid with a strong defoaming ability. It is well suited for use in the production of coil and industrial paints and coatings. | |
| Methyl Propanediol | Perstorp | Methyl Propanediol is a clear colorless liquid that is used in saturated and unsaturated polyesters for powder coatings, coil coatings and other stoving enamels. | |
| Nebores® HPE 34-70 X | NECARBO B.V. | Nebores® HPE 34-70 X is a hydroxy functional polyester resin that is non-yellowing and cures with benzoguanamine and melamine resins. This product finds application in industrial stoving enamels and coil coatings. | |
| Nebores® HPE 44-50 WPB | NECARBO B.V. | Nebores® HPE 44-50 WPB is a water-dilutable, hydroxy functional polyester resin. It provides high gloss and reactivity, good pigment wetting and universal adhesion properties, and good yellowing and weather resistance. This product finds application in in...展开 Nebores® HPE 44-50 WPB is a water-dilutable, hydroxy functional polyester resin. It provides high gloss and reactivity, good pigment wetting and universal adhesion properties, and good yellowing and weather resistance. This product finds application in industrial stoving enamels, coil coatings, and 2-K PU topcoats. 收起 | |
| Neopentyl Glycol 90 | Perstorp | Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
| Nichigo-Polyester LP011 | Nippon Gohsei | Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...展开 Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. 收起 | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| Permanent Yellow HR | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solven...展开 Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solvent-based inks, and water-based inks. 收起 | |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...展开 Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. 收起 | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. 收起 | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. 收起 | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. 收起 | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. 收起 | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. 收起 | |
| T-1 PVDF | Shanghai Ofluorine Chemical Technology Co.,LTD. | T-1 PVDF, in the form of a white solid powder without impurities, is a homopolymer of vinylidene fluoride. This product features excellent temperature resistance and good mechanical strength. It has a specific gravity that lies between 1.74 and 1.77, and ...展开 T-1 PVDF, in the form of a white solid powder without impurities, is a homopolymer of vinylidene fluoride. This product features excellent temperature resistance and good mechanical strength. It has a specific gravity that lies between 1.74 and 1.77, and its melting point lies between 156 and 165°C. It can be used in liquid coatings and coil coatings. 收起 | |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，增加了固体含量，改善了光泽度并提供广泛的可溶性和兼容性。这款产品推荐用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，防腐蚀，并提供光泽性。这款产品提供出色的铝、钢材、镀锌钢以及塑料、PVC和ABS表面的粘度。它鬼将用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...展开 Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. 收起 | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...展开 Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 收起 | |
| YTDB-101 | Qingdao Xinyutian Chemical Co., Ltd. | YTDB-101 is a saturated polyester resin used as prime and floating coat for coiled materials. This product contains useful flexibility, adhesive power and solvent resistance. | |
| YTDB-102 | Qingdao Xinyutian Chemical Co., Ltd. | YTDB-102 is a saturated polyester resin used as prime and floating coat for coiled materials. This product contains useful flexibility, adhesive power, solvent resistance and film hardness. | |
| YTMS-201 | Qingdao Xinyutian Chemical Co., Ltd. | YTMS-201 is a saturated polyester resin used for finishing coat of coiled materials as well as industry coatings. This product contains useful flexibility, adhesive power, solvent resistance and fullness. | |
| YTMS-202 | Qingdao Xinyutian Chemical Co., Ltd. | YTMS-202 is a saturated polyester resin used for finishing coat of coiled materials. This product contains high flexibility, adhesive power, solvent resistance, fullness and a high degree of film hardness. |
