| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...展开 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 收起 | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...展开 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 收起 | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...展开 Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 收起 | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...展开 Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 收起 | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...展开 Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 收起 | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...展开 Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 收起 | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...展开 Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 收起 | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...展开 ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Suny Chem 烟台信谊化工有限公司 | 聚天门冬氨酸酯树脂Sunaspar SN220是一种无溶剂的，带有仲氨基可与-NCO反应的树脂，相当于产品NH 1220。可用于粘合剂领域；可用于钢结构、石油管道等重、轻防腐领域的防腐涂料；或用于泡沫景观、混凝土防水材料等领域 | |
| Aspartic Ester Resin Sunaspar SN520 | Suny Chem 烟台信谊化工有限公司 | Sunaspar SN520是一种无溶剂，带有仲氨基可与-NCO 反应的树脂，相当于NH 1520。这款产品具有高固低粘，可制成高固体份低粘度环保涂料，本品与大部分羟基丙烯酸树脂、CAB具有优异的相溶性；涂膜具有优异的硬度，丰满度、流平性能和光泽。这款产品广泛用于汽车，工业领域和防腐蚀油漆中。 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...展开 BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 收起 | |
| BH-2006 Special Auxillary | Guangzhou Baohui Resin Co., Ltd. | BH-2006 Special Auxillary is a phosphate containing an hydroxyl functional group. Appearing as an amber liquid, it functions to improve the adhesion of solvent type and water coatings to metal substrates by bonding directly to them. It also improves the f...展开 BH-2006 Special Auxillary is a phosphate containing an hydroxyl functional group. Appearing as an amber liquid, it functions to improve the adhesion of solvent type and water coatings to metal substrates by bonding directly to them. It also improves the flexibility and anti-corrosive performance of coatings. Applications for BH-2006 include industrial and anti-corrosive coatings, in acid solidification primers, and in coatings with resin as a base stock. 收起 | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...展开 BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 收起 | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...展开 BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 收起 | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...展开 BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 收起 | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...展开 BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 收起 | |
| BH-9002 | Guangzhou Baohui Resin Co., Ltd. | BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties...展开 BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties. 收起 | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...展开 CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 收起 | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展开 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展开 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DEXICRYL 3082 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to...展开 DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to heat, light, and UV radiation. 收起 | |
| Disvacryl-1013 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resis...展开 Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resistance. 收起 | |
| Disvacryl-1014 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane co...展开 Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane coatings. 收起 | |
| Disvacryl-1015 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1015 is an acrylic polyol resin. This product includes cellosolve acetate as a volatile byproduct. It can be used in high-solid resins that provide good durability for high-build coatings. | |
| Disvacryl-1016 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1016 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in chemically resistant high-performance polyurethane coatings. | |
| Disvacryl-1018 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1018 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in polyurethane coatings with good flexibility and weatherproof properties. | |
| Disvacryl-1019 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1019 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in fast-drying polyurethane coatings with good UV resistance. It can also be used in wood coatings. | |
| Disvamide-616 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-616 is a reactive polyamide resin in a 70% solution of xylene. This product appears as a surface liquid. It can be used in protective surface coatings. | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Docure YC-230H | Kukdo Chemical Co., Ltd. | Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...展开 Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. 收起 | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...展开 Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. 收起 | |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...展开 Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KBPN-110 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBP...展开 Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for powder coating or laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBPN-115 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molec...展开 Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBPN-120 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molec...展开 Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBR-1726 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1726 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1726 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1726 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1726 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1728 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1728 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1728 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1728 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1728 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1729 | Kukdo Chemical Co., Ltd. | Epokukdo BR-1729 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1729 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and hea...展开 Epokukdo BR-1729 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1729 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1753 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1753 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1753 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1753 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1753 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KD-211D | Kukdo Chemical Co., Ltd. | Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-211E | Kukdo Chemical Co., Ltd. | Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...展开 Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-211EX75 | Kukdo Chemical Co., Ltd. | Epokukdo KD-211ED is a solid type standard epoxy resin derived from a bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211EX75 dissolved in xylene is gener...展开 Epokukdo KD-211ED is a solid type standard epoxy resin derived from a bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211EX75 dissolved in xylene is generally used in many applications. 收起 | |
| Epokukdo KD-211G | Kukdo Chemical Co., Ltd. | Epokukdo KD-211G is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...展开 Epokukdo KD-211G is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-211GX75 | Kukdo Chemical Co., Ltd. | Epokukdo KD-211G is a solid type standard epoxy resin derived from bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211GX75 dissolved in xylene is generall...展开 Epokukdo KD-211G is a solid type standard epoxy resin derived from bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211GX75 dissolved in xylene is generally used in many applications. 收起 | |
| Epokukdo KD-211H | Kukdo Chemical Co., Ltd. | Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-213 | Kukdo Chemical Co., Ltd. | Epokukdo KD-213 is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and ch...展开 Epokukdo KD-213 is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-213C | Kukdo Chemical Co., Ltd. | Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-213F2 | Kukdo Chemical Co., Ltd. | Epokukdo KD-213F2 is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain...展开 Epokukdo KD-213F2 is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-213H | Kukdo Chemical Co., Ltd. | Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-214C | Kukdo Chemical Co., Ltd. | Epokukdo KD-214C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-214C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214CR | Kukdo Chemical Co., Ltd. | Epokukdo KD-214CR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain...展开 Epokukdo KD-214CR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214L | Kukdo Chemical Co., Ltd. | Epokukdo KD-214L is a high molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, m...展开 Epokukdo KD-214L is a high molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214M | Kukdo Chemical Co., Ltd. | Epokukdo KD-214M is a high molecular weight epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechani...展开 Epokukdo KD-214M is a high molecular weight epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242C | Kukdo Chemical Co., Ltd. | Epokukdo KD-242C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-242C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 |
