| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展开 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...展开 CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...展开 Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. 收起 | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...展开 Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. 收起 | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| G21M-75 | Kito Chem | G21M-75 is a polyurethane curing accelerator made of an aromatic isocyanate that base on the floating toluene two different cyanic acid resin (TDI). 75% solid content ethyl acetate solution as the form of supply. It can be mixed with the hydroxy containin...展开 G21M-75 is a polyurethane curing accelerator made of an aromatic isocyanate that base on the floating toluene two different cyanic acid resin (TDI). 75% solid content ethyl acetate solution as the form of supply. It can be mixed with the hydroxy containing resin, to prepare the double component polyurethane coating and adhesive. 收起 | |
| KEPERPOL®-702 | Kito Chem | KEPERPOL®-702 is a silicone defoaming agent made of a fluorinated polysiloxane solution. It is a colorless liquid with good compatibility in most formulations, reducing the pinholes and cratering problem on the film. This additive is well suited for use i...展开 KEPERPOL®-702 is a silicone defoaming agent made of a fluorinated polysiloxane solution. It is a colorless liquid with good compatibility in most formulations, reducing the pinholes and cratering problem on the film. This additive is well suited for use in the production of varnishes, gloss paints and transparent epoxy pouring sealant formulas. 收起 | |
| KEPERPOL®-7315 | Kito Chem | KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps ...展开 KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
| KEPERRHE®-UR4020 | Kito Chem | KEPERRHE®-UR4020 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent an...展开 KEPERRHE®-UR4020 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent anti-sagging properties. This additive is well suited for use in the production of latex paints, water-based adhesives and printing inks. 收起 | |
| KEPERRHE®-UR4030 | Kito Chem | KEPERRHE®-UR4030 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent an...展开 KEPERRHE®-UR4030 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent anti-sagging properties. This additive is well suited for use in the production of latex paints, water-based adhesives and printing inks. 收起 | |
| KEPERRHE®-UR4040 | Kito Chem | KEPERRHE®-UR4040 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent an...展开 KEPERRHE®-UR4040 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent anti-sagging properties. This additive is well suited for use in the production of latex paints, water-based adhesives and printing inks. 收起 | |
| KEPERRHE®-UR4050 | Kito Chem | KEPERRHE®-UR4050 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent an...展开 KEPERRHE®-UR4050 is a rheological agent made of an associative polyurethane solution. It is a slightly turbid liquid that can improve the viscosity of most formulations without APEO or organotin. Its effects are independent from pH and it has excellent anti-sagging properties. This additive is well suited for use in the production of latex paints, water-based adhesives and printing inks. 收起 | |
| KEPERSURF®-1200 | Kito Chem | KEPERSURF®-1200 is a wetting and defoaming agent made of an alkynedio surfactant. It is a white waxy and sticky substance with a non-ionic structure. It dose not affect water resistance, gloss, transparency, or recoating of the film. This product is well ...展开 KEPERSURF®-1200 is a wetting and defoaming agent made of an alkynedio surfactant. It is a white waxy and sticky substance with a non-ionic structure. It dose not affect water resistance, gloss, transparency, or recoating of the film. This product is well suited for use in the production of water-based and oil-based paints, adhesives and printing inks where good foam inhibition is required. 收起 | |
| KEPERSURF®-1204 | Kito Chem | KEPERSURF®-1204 is a wetting and defoaming agent made of an alkynedio / ethylene oxide copolymer. It is a yellowish liquid that has a non-ionic structure with good compatibility in most systems. And dose not affect water resistance, gloss, transparency or...展开 KEPERSURF®-1204 is a wetting and defoaming agent made of an alkynedio / ethylene oxide copolymer. It is a yellowish liquid that has a non-ionic structure with good compatibility in most systems. And dose not affect water resistance, gloss, transparency or recoating of the film. This product is well suited for use in the production of water-based paints, inks and adhesives with an alcohol solvent. 收起 | |
| KEPERSURF®-1208 | Kito Chem | KEPERSURF®-1208 is a flatting, leveling and wetting agent made of an alkynedio / ethylene oxide copolymer solution. It is a yellowish liquid with good foam inhibition and is compatible in a wide variety of water-based systems. This product is well suited ...展开 KEPERSURF®-1208 is a flatting, leveling and wetting agent made of an alkynedio / ethylene oxide copolymer solution. It is a yellowish liquid with good foam inhibition and is compatible in a wide variety of water-based systems. This product is well suited for use in the production of coatings, paints, inks and adhesives. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起 | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...展开 Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. 收起 | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起 | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...展开 Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...展开 Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. 收起 | |
| Photo Initiator-1173 | Guangzhou Baohui Resin Co., Ltd. | Photo Initiator-1173 is a photo initiator appearing as a clear yellow liquid. This product is commonly used in UV-curing resins, inks, coatings, and adhesives. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...展开 Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. 收起 | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...展开 R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...展开 SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...展开 SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. 收起 | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...展开 SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. 收起 | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Tohmide 225-X | Sanho Chemical Co., Ltd. | Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coati...展开 Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
| Tohmide 225-XX | Sanho Chemical Co., Ltd. | Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, s...展开 Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
| Tohmide 235-A | Sanho Chemical Co., Ltd. | Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formul...展开 Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formulation applications. 收起 | |
| Tohmide 235-S | Sanho Chemical Co., Ltd. | Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive ...展开 Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive and grout formulation applications. 收起 | |
| Tohmide 2400 | Sanho Chemical Co., Ltd. | Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation app...展开 Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation applications. 收起 | |
| Tohmide 245 | Sanho Chemical Co., Ltd. | Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...展开 Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起 | |
| Tohmide 245-LP | Sanho Chemical Co., Ltd. | Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective c...展开 Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective coating formulation applications. 收起 | |
| Tohmide 245-S | Sanho Chemical Co., Ltd. | Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation appl...展开 Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起 | |
| Tohmide 2500 | Sanho Chemical Co., Ltd. | Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation appl...展开 Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation applications. 收起 | |
| Tohmide 252 | Sanho Chemical Co., Ltd. | Tohmide 252 is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 100-400 mPa.s and a specific gravity of 0.96. Tohmide 252 is most commonly used in adhesive formulation applications. | |
| Tohmide 275 | Sanho Chemical Co., Ltd. | Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive for...展开 Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Tohmide 280-B | Sanho Chemical Co., Ltd. | Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive ...展开 Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive formulation applications. 收起 | |
| Tohmide HR-11 | Sanho Chemical Co., Ltd. | Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation appl...展开 Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation applications. 收起 | |
| Uni-Dur E 1001 | S.A.P.I.C.I. SpA | Uni-Dur E 1001 is an isocyanic hardener. This product can be used to cross-link polyurethane adhesives for natural or synthetic rubber. It is soluble in ethyl acetate and appears as a clear, viscous fluid. | |
| Uni-Dur WB 7075 | S.A.P.I.C.I. SpA | Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...展开 Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. 收起 | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...展开 Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...展开 Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...展开 Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...展开 Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 |
