UL Prospector

成功!

成功保存搜索结果
Bis(triethoxysilylpropyl)tetrasulfide Qufu Wanda Chemical Industry Co., Ltd. Bis(triethoxysilylpropyl)tetrasulfide is yellowish clear liquid that is soluble in primary alcohols, ketones, benzene, toluene, chlorinated hydtocarbons, acetonitrile, dimethylfomaminde and dimethysulfoxide, but insoluble in water. It is used in the rubb...展开 Bis(triethoxysilylpropyl)tetrasulfide is yellowish clear liquid that is soluble in primary alcohols, ketones, benzene, toluene, chlorinated hydtocarbons, acetonitrile, dimethylfomaminde and dimethysulfoxide, but insoluble in water. It is used in the rubber industry for improved modulus and tensile strength and reducing compound viscosity to save energy consumption during processing. This product can be used in a variety of rubbers. 收起
DISPERBYK®-174 Byk 毕克 溶剂型涂料用高分子量润湿分散剂。通过立体位阻防止颜料重絮凝,从而稳定涂料和颜料浓缩浆中颜料着色力和色相。
DISPERBYK®-180 Byk 毕克 一种用于水性、溶剂型、无溶剂型的工业涂料和汽车涂料的润湿和分散助剂。可以稳定无机颜料,并防止絮凝,同时也可减少浮色和发花,并提高浆料的贮存稳定性。
DISPERBYK®-182 Byk 毕克 一种用于水性、溶剂型、无溶剂型涂料和溶剂型颜料浓缩浆的润湿和分散助剂,可防止颜料产生絮凝,稳定颜料在油漆和颜料浆的色相和着色力。
Epokukdo 1,4BDGE Kukdo Chemical Co., Ltd. Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...展开 Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. 收起
Epokukdo 1,6HDGE Kukdo Chemical Co., Ltd. Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...展开 Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. 收起
Epokukdo BGE Kukdo Chemical Co., Ltd. Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, ...展开 Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, etc. 收起
Fumed Silica W-150 Shouguang Baote Chemical Co., Ltd. Fumed Silica W-150, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants,...展开 Fumed Silica W-150, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants, and printing inks. 收起
Fumed Silica W-200 Shouguang Baote Chemical Co., Ltd. Fumed Silica W-200, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants,...展开 Fumed Silica W-200, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants, and printing inks. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
VISCOBYK®-4041 Byk 毕克 PVC塑料溶胶的降粘剂。它是一种脂肪族碳氢化合物,含有中性的润湿和分散组分
XY 748A C12~14 Alkyl Glycidyl Ether Anhui Xinyuan Chemical Co., Ltd. 安徽新远科技有限公司 XY 748 C12~14 Alkyl Glycidyl Ether is an organic compound. It is a colorless transparent liquid, primarily used as an additive to epoxy resins in order to reduce their viscosity. It can be used in the production of floor, concrete, fillers and embedding m...展开 XY 748 C12~14 Alkyl Glycidyl Ether is an organic compound. It is a colorless transparent liquid, primarily used as an additive to epoxy resins in order to reduce their viscosity. It can be used in the production of floor, concrete, fillers and embedding materials. 收起
YCK-3030 YCK CHEMICAL 毅克化学(上海)科技有限公司 YCK-3030 is a polyamide rheological agent with a wide range of solvent compatibility. It improves system resistance to sagging and pigment suspension and is more easily dispersed and activated. This product has non-volatile matter of 20%, a density of 0.8...展开 YCK-3030 is a polyamide rheological agent with a wide range of solvent compatibility. It improves system resistance to sagging and pigment suspension and is more easily dispersed and activated. This product has non-volatile matter of 20%, a density of 0.87g/cm^3 at 25℃, and a flash point of 12℃. It is recommended for furniture coatings, industrial coatings, and automotive coatings. 收起