| CV-2644 | NuSil Silicone Technology 1 | CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operati...展开 CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. This product is well suited to use with form-in-place conductive gaskets. 收起 | |
| CV2-2644 | NuSil Silicone Technology 1 | CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it ca...展开 CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV3-2289-1 | NuSil Silicone Technology 1 | CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture...展开 CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture are a threat. It is also an ideal product for applications that require minimal outgassing. 收起 | |
| CV4-2500 | NuSil Silicone Technology 1 | CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be u...展开 CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be used as an embedding or potting compound for electronic assemblies that need to be protected from extremes in radiation, humidity, mechanical and thermal stress. 收起 | |
| Epoxies® 40-3900 | Epoxies, Etc. | Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic...展开 Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder. 收起 | |
| Epoxies® 40-3905 | Epoxies, Etc. | Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...展开 Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. 收起 | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...展开 Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. 收起 | |
| Epoxies® 40-3911 | Epoxies, Etc. | Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part ...展开 Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. And it is a good choice for lid sealing and die bonding applications. 收起 | |
| Hanwha EVA 1815 | Hanwha Chemical Corporation | Hanwha EVA 1815, ethylene vinyl acetate, is manufactured by high pressure autoclave process and designed for base resin of variety of wire & cable compounds such as semi-conductive compound, flame retardant compound. EVA 1815 is well known for its excelle...展开 Hanwha EVA 1815, ethylene vinyl acetate, is manufactured by high pressure autoclave process and designed for base resin of variety of wire & cable compounds such as semi-conductive compound, flame retardant compound. EVA 1815 is well known for its excellent processability, filler loadability and high quality assurance. 收起 | |
| Hanwha EVA 1826 | Hanwha Chemical Corporation | Hanwha EVA 1826 is a resin manufactured by high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound and flame retardant compound. EVA 1826 is well known for its excellent proc...展开 Hanwha EVA 1826 is a resin manufactured by high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound and flame retardant compound. EVA 1826 is well known for its excellent processability, filler loadability and high quality assurance. 收起 | |
| Hanwha EVA 1828 | Hanwha Chemical Corporation | Hanwha EVA 1828 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 1828 is well known for its excellent proce...展开 Hanwha EVA 1828 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 1828 is well known for its excellent processability, filler loadability and high quality assurance. 收起 | |
| Hanwha EVA 1834 | Hanwha Chemical Corporation | Hanwha EVA 1834 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, etc. EVA 1834 is well known for its excellent processability, filler loada...展开 Hanwha EVA 1834 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, etc. EVA 1834 is well known for its excellent processability, filler loadability and high quality assurance. 收起 | |
| Hanwha EVA 2815 | Hanwha Chemical Corporation | Hanwha EVA 2815 is a resin manufactured by a high pressure Tubular process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 2815 is well known for its excellent processab...展开 Hanwha EVA 2815 is a resin manufactured by a high pressure Tubular process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 2815 is well known for its excellent processability, filler loadability and high quality assurance. 收起 | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...展开 R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. 收起 |
