UL Prospector

成功!

成功保存搜索结果
AMBERLAC® 3755-X-80 Reichhold Chemicals, Inc. AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product ha...展开 AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product has high gloss, good color retention and dries rapidly. The end product will have a hard film. 收起
BECKOSOL® 1700-M-60 Reichhold Chemicals, Inc. BECKOSOL® 1700-M-60 is an air-dry, long oil, siliconized copolymer alkyd that meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels. This product exhibits high gloss and color r...展开 BECKOSOL® 1700-M-60 is an air-dry, long oil, siliconized copolymer alkyd that meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels. This product exhibits high gloss and color retention on exterior exposures, and resists fading. It may be used in transportation equipment, exterior maintenance coatings, outdoor signs, metal siding and other metal surfaces, and enamels on metal surfaces where high gloss and color retention are desired in air-dry enamels. 收起
Benalac 4852 Benasedo Benalac 4852 is an Oleoresinous binders endowed with very good wetting power, hardness, gloss, setting and drying. It has a Linseed oil type, with an oil content of 67%, a viscosity [G.H.] of Z7-Z8, and an N.Ac. solids amount of 6-12.
Benalac 4855 Benasedo Benalac 4855 is used in printing inks, off-set inks for flat bed or rotary machines and overprint varnishes. It is characterized by excellent setting speed, rub resistance, sharp gloss, gloss retention and greater color strength. It has a Linseed oil, wit...展开 Benalac 4855 is used in printing inks, off-set inks for flat bed or rotary machines and overprint varnishes. It is characterized by excellent setting speed, rub resistance, sharp gloss, gloss retention and greater color strength. It has a Linseed oil, with a 73% oil amount, a viscosity of Z3-Z4, and an N.Ac. solids content of 8-12. 收起
Benalac 5191 Benasedo Benalac 5191 is an oleoresinous non-yellowing binder for lithographic inks, endowed with high gloss, pigment-wetting, setting speed, adhesion and toughness. It is made using Safflower oil and has a 78% oil type, with a viscosity [G.H.] of Z69ab.), and an ...展开 Benalac 5191 is an oleoresinous non-yellowing binder for lithographic inks, endowed with high gloss, pigment-wetting, setting speed, adhesion and toughness. It is made using Safflower oil and has a 78% oil type, with a viscosity [G.H.] of Z69ab.), and an N.Ac. solids content of 8-15. 收起
Benalac S 740 Benasedo Benalac S 740 is a general purpose resinous vehicle for off-set inks. It is also used in tinting pastes for air drying coatings and inks. It is from a Soya oil type, with a 75% oil content, a viscosity [G.H.] of Z1-Z2, and an N.Ac. solids content of 6-15.
Benalac V 770 Benasedo Benalac V 770 is used in low viscosity off-set inks because it provides good abrasion resistance. It has a Linseed oil type with an oil content of 76%, a viscosity [G.H.] of V-X, and an N.Ac. Solids content of 6-15.
Benasol 1804 Benasedo Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...展开 Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. 收起
Benasol 3 V in Xylene Benasedo Benasol 3 V in Xylene is used in rust-inhibitive metal and non-lifting primers for nitrocellulose lacquers. It is made of Linseed - Tung Phenolic oil and has a 32% oil content. It has a 50% solids amount, with a viscosity of Y-Z1, an A.V. solids amount of...展开 Benasol 3 V in Xylene is used in rust-inhibitive metal and non-lifting primers for nitrocellulose lacquers. It is made of Linseed - Tung Phenolic oil and has a 32% oil content. It has a 50% solids amount, with a viscosity of Y-Z1, an A.V. solids amount of 15-24, and a color [G.H.] max. of 8. It has an application for air. 收起
Benasol 3 V in Xylene/Isobutyl Acetate Benasedo Benasol 3 V in Xylene/Isobutyl Acetate is used in rust-inhibitive metal and non-lifting primers for nitrocellulose lacquers. It is made of Linseed - Tung Phenolic oil and has a 32% oil content. It has a 60% solids amount, with a viscosity of Z2-Z3, an A.V...展开 Benasol 3 V in Xylene/Isobutyl Acetate is used in rust-inhibitive metal and non-lifting primers for nitrocellulose lacquers. It is made of Linseed - Tung Phenolic oil and has a 32% oil content. It has a 60% solids amount, with a viscosity of Z2-Z3, an A.V. solids amount of 15-24, and a color [G.H.] max. of 8. It has an application for air. 收起
Benasol 5097 in White Spirit Benasedo Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...展开 Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. 收起
Benasol 5097 in Xylene Benasedo Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...展开 Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. 收起
Benasol SL58 Benasedo Benasol SL58 is used in siliconized paints with a high degree of gloss, colour retention and outdoor resistance. This product uses soya and siliconized oil, with 53% oil and 60% solids content. It has an A.V. solids amount of 5-12, a viscosity [G.H.] of V...展开 Benasol SL58 is used in siliconized paints with a high degree of gloss, colour retention and outdoor resistance. This product uses soya and siliconized oil, with 53% oil and 60% solids content. It has an A.V. solids amount of 5-12, a viscosity [G.H.] of V-X, and a colour [G.H.] maximum of 6. Benasol SL58 has air applications. 收起
Disproportionated Rosin (N) Wuzhou Longteng Chemical Co., Ltd. Disproportionated Rosin (N) is a rosin derived from isomerizing gum rosin with a catalyst. This product has emulsification properties that can be applied in the production of water-soluble pressure sensitive adhesive. It has a minimum 45% dehydroabietic a...展开 Disproportionated Rosin (N) is a rosin derived from isomerizing gum rosin with a catalyst. This product has emulsification properties that can be applied in the production of water-soluble pressure sensitive adhesive. It has a minimum 45% dehydroabietic acid content and a 75°C softening point. 收起
Disproportionated Rosin (WW) Wuzhou Longteng Chemical Co., Ltd. Disproportionated Rosin (WW) is a rosin derived from isomerizing gum rosin with a catalyst. This product has emulsification properties that can be applied in the production of water-soluble pressure sensitive adhesive. It has a minimum 52% dehydroabietic ...展开 Disproportionated Rosin (WW) is a rosin derived from isomerizing gum rosin with a catalyst. This product has emulsification properties that can be applied in the production of water-soluble pressure sensitive adhesive. It has a minimum 52% dehydroabietic acid content and a 75°C softening point. 收起
Disproportionated Rosin 1st Grade Resin Chemicals Co., Ltd. Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起
Disproportionated Rosin Extra Grade Resin Chemicals Co., Ltd. Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起
EBA 1522-60 Royal Chemie EBA 1522-60 is a styrenated alkyd based on mixed oils. This product is characterized by its fast drying properties, hardness, mechanical properties, gloss, and chemical resistance. It has a non-volatile percentage of 60 ± 1%. EBA 1522-60 is used in air-dr...展开 EBA 1522-60 is a styrenated alkyd based on mixed oils. This product is characterized by its fast drying properties, hardness, mechanical properties, gloss, and chemical resistance. It has a non-volatile percentage of 60 ± 1%. EBA 1522-60 is used in air-drying enamels for metals and Hammerstone finishes. 收起
Fintac2331 Non-Crystallizing Rosin Finjet Chemical Industries, Ltd. Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展开 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起
Fintac2333 Modified Rosin Resin Finjet Chemical Industries, Ltd. Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展开 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起
Fintac5336 Polymerized Rosin Finjet Chemical Industries, Ltd. Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展开 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起
HGR12 Wuzhou Longteng Chemical Co., Ltd. HGR12 is a transparent hydrogenated rosin that has a softening point of 71°C. This product is commonly used in adhesives, coatings, and inks.
HGR20 Wuzhou Longteng Chemical Co., Ltd. HGR20 is a transparent hydrogenated rosin that has a softening point of 71°C. This product is commonly used in adhesives, coatings, and inks.
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Idroben 130 Benasedo Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...展开 Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. 收起
Idroben 160 Benasedo Idroben 160 is used in fast air-drying enamels with high-body and gloss characteristics for agricultural machinery. This product is made of alkyd dispersion and special fatty acids, with a 35% oil content, and is solvent in water. It has a 42% solids amou...展开 Idroben 160 is used in fast air-drying enamels with high-body and gloss characteristics for agricultural machinery. This product is made of alkyd dispersion and special fatty acids, with a 35% oil content, and is solvent in water. It has a 42% solids amount, a viscosity [Brookf.} m Pa.s of 3000, a pH value of 7.3-7.8, and a white milky colour. Idroben 160 has air and bake applications. 收起
Idroben 169 Benasedo Idroben 169 is used in fast air-drying industrial finishes endowed with high characteristics of adhesion, high-body and gloss. It is an alkyd dispersion and special fatty acid, with an oil content of 35%. It is solvent in water, has a 44% solids content, ...展开 Idroben 169 is used in fast air-drying industrial finishes endowed with high characteristics of adhesion, high-body and gloss. It is an alkyd dispersion and special fatty acid, with an oil content of 35%. It is solvent in water, has a 44% solids content, and has air and bake applications. This product has a viscosity [Vrookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. 收起
Idroben 178 Benasedo Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 3...展开 Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. 收起
Idroben 180 Benasedo Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...展开 Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. 收起
Idroben 190 Benasedo Idroben 190 is used in primers and non-yellowing, air-drying finishes. This product is an alkyd dispersion and soya, is soluble in water, and has a 50% oil content. It contains 48% solids, a viscosity [Brookf.] m Pa.s of 2300-3300, a pH level of 7.3-8....展开 Idroben 190 is used in primers and non-yellowing, air-drying finishes. This product is an alkyd dispersion and soya, is soluble in water, and has a 50% oil content. It contains 48% solids, a viscosity [Brookf.] m Pa.s of 2300-3300, a pH level of 7.3-8.0, and has a milky white colour. Idroben 190 has air applications. 收起
Idroben 828 Benasedo Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...展开 Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. 收起
Polymerized Rosin Resin Chemicals Co., Ltd. Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起
Polytone AP 110 Polyols and Polymers Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展开 Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 110 is primarily used to impart good open time combined with green tack and durability, and provides heat resistance. Polytone AP 110 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. 收起
Request Sample RESYDROL® AM 224W/40WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 可水稀释脂肪酸改性醇酸树脂
Request Sample RESYDROL® AX 906W/35WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 水性,环氧树脂改性,无油,醇酸树脂。具有杰出的耐腐蚀性,出色的颜料润湿性,高反应活性以及非常好的储存稳定性
Request Sample RESYDROL® AY 241W/40WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化干燥的醇酸丙烯酸共聚物乳液,具有极快速的起始干燥性能和非常好的耐水性
Request Sample RESYDROL® AY 466W/38WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 棕褐色,不透明氧化干燥的丙烯酸改性醇酸树脂,水性乳液
Request Sample RESYDROL® AY 586W/38WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化干燥的,丙烯酸改性,核-壳结构,长油醇酸树脂,以水性乳胶形式供应
Request Sample RESYDROL® AY 586W/42WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化干燥的丙烯酸改性的核-壳结构长油醇酸树脂,以水性乳胶形式供应
Request Sample RESYDROL® AY 586W/45WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化固化的丙烯酸改性醇酸树脂的水性乳胶
Request Sample RESYDROL® AZ 436W/45WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化干燥的丙烯酸和氨基甲酸酯改性的醇酸树脂,水性乳液
Request Sample RESYDROL® VAY 6096W/39WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 短油度,氧化干燥的丙烯酸改性醇酸树脂,作为水性乳液。它是用于配制极快速干燥工业涂料体系的单一基料
Request Sample RESYDROL® VAY 6278W/45WA Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 氧化干燥的,可用氨水中和的丙烯酸醇酸树脂混合物,以水性乳胶形式存在
Refined Rosin Modified Resin GE-85L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin GE-90L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-100L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-105L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-95L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Rosin Modified Phenolic Resin PI116 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI118 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI136 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI138 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI142 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI145 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI146 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI147 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI148 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI149 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI152 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI155 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI160 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Resin GE85 Resin Chemicals Co., Ltd. Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin GE90 Resin Chemicals Co., Ltd. Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE 105 Resin Chemicals Co., Ltd. Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE100 Resin Chemicals Co., Ltd. Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE95 Resin Chemicals Co., Ltd. Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
WorléeDur D 46 Worlée-Chemie G.m.b.H. 德国德信利化学 一种短油环氧酯,用于自干漆和烘干漆,具有出色的附着力,快速干燥,以及良好的抗化学性。
WorléeDur D 6311 (60% In Dearomatized HC 140-165) Worlée-Chemie G.m.b.H. 德国德信利化学 一种自干长油改性环氧酯,用于制造特殊的防腐蚀和附着性底漆。
WorléeDur D 6311 (60% In White Spirit 145-195) Worlée-Chemie G.m.b.H. 德国德信利化学 一种自干长油改性环氧酯,用于制造特殊的防腐蚀和附着性底漆。
WorléeDur MF 45 Worlée-Chemie G.m.b.H. 德国德信利化学 用于耐腐蚀富锌底漆的环氧酯,具有出色的长期耐腐蚀性和耐水性。
WorléeKyd AC 2550 Worlée-Chemie G.m.b.H. 德国德信利化学 它是一种短油长、干燥速度极快的丙烯酸酯醇酸树脂。
WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 160-200) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂。用于木器清漆、地板封闭漆、底漆、中层漆和快干面漆。
WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂。用于木器清漆、地板封闭漆、底漆、中层漆和快干面漆。
WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂。用于木器清漆、地板封闭漆、底漆、中层漆和快干面漆。
WorléeKyd B 865 U (55% In White Spirit 145/195) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂。主要用作木器清漆、地板封闭漆、底漆、中层漆和快干面漆的主体树脂。
WorléeKyd C 632 M Worlée-Chemie G.m.b.H. 德国德信利化学 一种改性少油醇酸树脂,用于制造聚氯乙烯、抗NC组合漆和油漆。
WorléeKyd L 138 Worlée-Chemie G.m.b.H. 德国德信利化学 一种短油酚醛改性醇酸树脂,适用于自干型和烘干底漆、中间漆、面漆和填料。
WorléeKyd L 3 Worlée-Chemie G.m.b.H. 德国德信利化学 一种亚麻子油基的醇酸树脂,用于制造颜料性能和干燥性能良好的高光泽度胶印油墨。
WorléeKyd L 7904 Worlée-Chemie G.m.b.H. 德国德信利化学 一种低粘度亚麻子油醇酸树脂,用于高固含量油漆的生产。
WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) Worlée-Chemie G.m.b.H. 德国德信利化学 一种短油、快速干燥醇酸树脂,用来生产自干型和强制干燥型底漆和面漆,以及低芳香族含量油漆。
WorléeKyd MH 439 (60% In Xylene) Worlée-Chemie G.m.b.H. 德国德信利化学 一种短油、快速干燥醇酸树脂,用来生产自干型和强制干燥型底漆和面漆,以及低芳香族含量油漆。
WorléeKyd S 351 NV NV Worlée-Chemie G.m.b.H. 德国德信利化学 它是一种中油长大豆油改性自干型醇酸树脂,专用于制造填料,具有适合涂刷的结构黏度,用于打底材料和半光平坦的墙面漆。
WorléeKyd S 5703 (55% In Dearomatized HC 160-200) Worlée-Chemie G.m.b.H. 德国德信利化学 一种脂肪族聚氨酯改性长油醇酸树脂,用于制造浅色的和不黄变木器清漆、地板密封漆和房屋漆。
WorléeKyd S 5703 (55% In White Spirit 145-195) Worlée-Chemie G.m.b.H. 德国德信利化学 一种脂肪族聚氨酯改性长油醇酸树脂,用于制造浅色的和不黄变木器清漆、地板密封漆和房屋漆。
WorléeKyd SD 6403 Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂,用于室内和室外木器油漆的制造。
WorléeKyd V 5241 U Worlée-Chemie G.m.b.H. 德国德信利化学 一种低粘度油改性聚氨酯,用于生产高固含量、更加环保的油漆。
WorléeSol 30 100% Worlée-Chemie G.m.b.H. 德国德信利化学 经化学改性的,粘度很低的亚麻子油聚合物。
WorléeSol 31 A Worlée-Chemie G.m.b.H. 德国德信利化学 一种改性亚麻子油聚合物,水溶性好,用来构成室外染色剂和木材防腐剂。
WorléeSol 31 C Worlée-Chemie G.m.b.H. 德国德信利化学 一种改性亚麻子油聚合物,水溶性好,用来构成室外染色剂和木材防腐剂。
WorléeSol 64 E Worlée-Chemie G.m.b.H. 德国德信利化学 一种短油、自干型醇酸树脂,用于制造水稀释性自干型或强制干燥型底漆和面漆。
WorléeSol 65 A Worlée-Chemie G.m.b.H. 德国德信利化学 一种自干短油醇酸树脂,用于制造水稀释性、自干和强制干燥型底漆和面漆。
WorléeThix D 46 Worlée-Chemie G.m.b.H. 德国德信利化学 一种触变型环氧酯,用于自干型和烘干型面漆、粘附底漆、抗腐蚀漆和锌粉涂料。
WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂,用于厚层涂料和油漆的制造。
WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) Worlée-Chemie G.m.b.H. 德国德信利化学 一种聚氨酯改性长油醇酸树脂,用于厚层涂料和油漆的制造。