| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...展开 CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...展开 CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. 收起 | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...展开 CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| Chicure® 2300 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® 2300 has various applications, It could be used as non-yellowing chain extender in PU application, curing agent in one pack epoxy resin, formaldehyde quenching agent, anti-NOx agent. | |
| Condensed Aluminum Phosphate | Shijiazhuang Xinsheng Chemical Co., Ltd. | Condensed Aluminum Phosphate is a high temperature binder and potassium silicate curing agent that is used in production and manufacturing of special glass, ceramics, inorganic coatings, and oxides of concrete. This product is a white powder in appearance...展开 Condensed Aluminum Phosphate is a high temperature binder and potassium silicate curing agent that is used in production and manufacturing of special glass, ceramics, inorganic coatings, and oxides of concrete. This product is a white powder in appearance with a PH value of 2-4. Condensed Aluminum Phosphate has a residue on sieve at 120 mesh of ≤50% and should be protected from weathering and sun exposure. 收起 | |
| CRYLCOAT® 4404-0 | Allnex | CRYLCOAT® 4404-0 is a superdurable resin designed for curing with TGIC in the ratio of 92/8. Clear coatings based on this system exhibit excellent outdoor durability, gloss and improved corrosion resistance and are suitable for a curing schedule of 20 mi...展开 CRYLCOAT® 4404-0 is a superdurable resin designed for curing with TGIC in the ratio of 92/8. Clear coatings based on this system exhibit excellent outdoor durability, gloss and improved corrosion resistance and are suitable for a curing schedule of 20 min x 160°C. 收起 | Request Sample |
| Curing Accelerator RC3126 | Hangzhou Right Chemical Co., Ltd. | Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing tem...展开 Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing temperature and accelerate the curing speed. It can also reduce curing temperatures in polyester/TGIC systems. 收起 | |
| Curox® I-200 | UNITED INITIATORS GMBH & CO KG | Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
| Curox® I-300 | UNITED INITIATORS GMBH & CO KG | Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
| Curox® M-100 | UNITED INITIATORS GMBH & CO KG | Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-102 | UNITED INITIATORS GMBH & CO KG | Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-103 | UNITED INITIATORS GMBH & CO KG | Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-104 | UNITED INITIATORS GMBH & CO KG | Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-180 | UNITED INITIATORS GMBH & CO KG | Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...展开 Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
| Curox® M-200 | UNITED INITIATORS GMBH & CO KG | Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-202 | UNITED INITIATORS GMBH & CO KG | Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-300 | UNITED INITIATORS GMBH & CO KG | Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-302 | UNITED INITIATORS GMBH & CO KG | Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-302R | UNITED INITIATORS GMBH & CO KG | Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-303 | UNITED INITIATORS GMBH & CO KG | Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-303R | UNITED INITIATORS GMBH & CO KG | Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...展开 Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-312 | UNITED INITIATORS GMBH & CO KG | Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-312R | UNITED INITIATORS GMBH & CO KG | Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-340 | UNITED INITIATORS GMBH & CO KG | Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-403 | UNITED INITIATORS GMBH & CO KG | Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
| Curox® MCH | UNITED INITIATORS GMBH & CO KG | Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...展开 Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® VP-160A | UNITED INITIATORS GMBH & CO KG | Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins...展开 Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins, coatings, and Novolac resins at ambient temperature. 收起 | |
| CV-2510 | NuSil Silicone Technology 1 | CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating tem...展开 CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating temperature range. And it is functional in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展开 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...展开 CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. 收起 | |
| Cyclic Trimethylolpropane Formal | Perstorp | Cyclic Trimethylolpropane Formal (CTF) is a cycloaliphatic monofunctional alcohol. It is a clear colorless liquid. CTF is used in acrylic acid esters for radiation curing and in fatty acid esters in synthetic lubricants | |
| D-230 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor ...展开 D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor pressure, and high primary amine content to coatings and adhesives. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...展开 D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. 收起 | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| Docure KH-240 | Kukdo Chemical Co., Ltd. | Docure KH-240 is a polyamine modified curing agent and is used for general adhesives. KH-240 has a good flexibility and adhesion strength. It is well suited for use in the production of primers and maintenance coatings. | |
| Docure KH-252 | Kukdo Chemical Co., Ltd. | Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cure...展开 Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cured epoxies and floorings. 收起 | |
| Docure KH-500 | Kukdo Chemical Co., Ltd. | Docure KH-500 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-500 shows good physical properties and chemical resistance. It is well suited for use in the production of coatings that are curable at low ...展开 Docure KH-500 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-500 shows good physical properties and chemical resistance. It is well suited for use in the production of coatings that are curable at low temperatures. 收起 | |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...展开 Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. 收起 | |
| Docure KH-721 | Kukdo Chemical Co., Ltd. | Docure KH-721 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-721 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. | |
| Docure KH-748 | Kukdo Chemical Co., Ltd. | Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, ...展开 Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. 收起 | |
| Docure KH-811 | Kukdo Chemical Co., Ltd. | Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for...展开 Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for use in the production of solvent free coatings and floorings with a high gloss sheen. 收起 | |
| Docure KH-812 | Kukdo Chemical Co., Ltd. | Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of ...展开 Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of solvent free coatings and floorings. 收起 | |
| Docure KH-813 | Kukdo Chemical Co., Ltd. | Docure KH-813 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-813 has low viscosity and solvent free. It can be used for solvent free coating systems and floorings. | |
| Docure KH-814 | Kukdo Chemical Co., Ltd. | Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulati...展开 Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulating products such as solvent free coatings. 收起 | |
| Docure KH-815 | Kukdo Chemical Co., Ltd. | Docure KH-815 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-815 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. KH-815 is faster in curing than KH-825. It is well suited for use i...展开 Docure KH-815 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-815 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. KH-815 is faster in curing than KH-825. It is well suited for use in the production of solvent free coatings . 收起 | |
| Docure KH-816 | Kukdo Chemical Co., Ltd. | Docure KH-816 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-816 gives high gloss films that are resistant to various chemicals. These properties make it ideal for formulating floorings and tank linings. | |
| Docure KH-818B | Kukdo Chemical Co., Ltd. | Docure KH-818B is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-818B gives high gloss films that are resistant to various chemicals. It can be used for solvent free coating systems and floorings. | |
| Docure KH-819 | Kukdo Chemical Co., Ltd. | Docure KH-819 is a cycloaliphatic amine modified curing agent for use with epoxy resins. It has very low viscosity in epoxy systems. KH-819 gives very rapid curing rate at ambient and low temperature. It can be used in formulations with good water spot re...展开 Docure KH-819 is a cycloaliphatic amine modified curing agent for use with epoxy resins. It has very low viscosity in epoxy systems. KH-819 gives very rapid curing rate at ambient and low temperature. It can be used in formulations with good water spot resistance and resistance to amine blush and chemical resistance. It is well suited for use in the production of solvent free coatings with good chemical resistance. 收起 | |
| Docure KH-825 | Kukdo Chemical Co., Ltd. | Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other ...展开 Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other coatings. 收起 | |
| Docure KH-831 | Kukdo Chemical Co., Ltd. | Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...展开 Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. 收起 | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-437 | Kukdo Chemical Co., Ltd. | Docure TH-437 is an aromatic amine modified curing agent for use with epoxy resins. TH-437 has low viscosity and long pot life. It can be used for electrical tools, pottings and castings. | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...展开 Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. 收起 | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Drolite™ 9040 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9040 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| Drolite™ 9041 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9041 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| EBECRYL® 7201 | Allnex | EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating ...展开 EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating effect on the UV cure speed. 收起 | Request Sample |
| Epilink™ 360 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...展开 Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. 收起 | Request Sample |
| Epokukdo KD-404 | Kukdo Chemical Co., Ltd. | Epokukdo KD-404 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-405 | Kukdo Chemical Co., Ltd. | Epokukdo KD-405 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410 | Kukdo Chemical Co., Ltd. | Epokukdo KD-410 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410J | Kukdo Chemical Co., Ltd. | Epokukdo KD-410J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-420 | Kukdo Chemical Co., Ltd. | Epokukdo KD-420 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-426 | Kukdo Chemical Co., Ltd. | Epokukdo KD-426 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-438 | Kukdo Chemical Co., Ltd. | Epokukdo KD-438 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448 | Kukdo Chemical Co., Ltd. | Epokukdo KD-448 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448H | Kukdo Chemical Co., Ltd. | Epokukdo KD-448H is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448J | Kukdo Chemical Co., Ltd. | Epokukdo KD-448J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KDF-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| Epotec® TH 7201 | Aditya Birla | Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, a...展开 Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, and methanol-gasoline mixtures. This product is ideal for use in chemical resistant flooring applications, chemical resistant coatings & linings, and solvent-free coatings. 收起 | |
| Epotec® TH 7202 | Aditya Birla | Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...展开 Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. 收起 | |
| Epotec® TH 7203 | Aditya Birla | Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical ...展开 Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical resistance. This product is ideal for use in chemical resistant coatings, secondary containment linings, and industrial protective coatings. 收起 | |
| Epotec® TH 7207 | Aditya Birla | Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...展开 Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. 收起 | |
| Epotec® TH 7210 | Aditya Birla | Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...展开 Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. 收起 | |
| Epotec® TH 7211 | Aditya Birla | Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...展开 Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. 收起 | |
| Epotec® TH 7212 | Aditya Birla | Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...展开 Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. 收起 |
