| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...展开 Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. 收起 | |
| Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...展开 Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...展开 Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. 收起 | |
| Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展开 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| Fluororesin | Ark (Fogang) Chemicals Industry Co., Ltd. | Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints ...展开 Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints which are weather durable, antifouling or salt fog resistant. 收起 | |
| HOMAPU™ 603-1 | Kito Chem | HOMAPU™ 603-1 is a water-based polymer made of a modified organic fluorine-silicone polyurethane dispersion. It is a slightly white liquid designed for applications on a wide variety of substrates including glass, ceramic, wood, liu rattan bamboo products...展开 HOMAPU™ 603-1 is a water-based polymer made of a modified organic fluorine-silicone polyurethane dispersion. It is a slightly white liquid designed for applications on a wide variety of substrates including glass, ceramic, wood, liu rattan bamboo products. This additive is well suited for use in the production of paints and coatings. 收起 | |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...展开 Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| P-Chlorobenzotrifluoride | Keeneyes International Co., Ltd. | P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks...展开 P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks faster than toluene, a common alternative solvent. PCBTF is also used as a replacement for xylene in cleaning, degreasing, and paint thinner products. 收起 | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...展开 Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 收起 |
