UL Prospector

成功!

成功保存搜索结果
AROPLAZ® 6126-Z-65 Reichhold Chemicals, Inc. AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be...展开 AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be used in melamine-crosslinked baking enamels for coil coating applications that need high flexibility. 收起
AROPLAZ® 6749-XA6-90 Reichhold Chemicals, Inc. AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture...展开 AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. 收起
Request Sample Alcon 07-571 Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 Alcon 07-571 is a hydroxyl terminated saturated polyester resin, which may be reacted with isocyanates, to produce films exhibiting excellent properties. It is recommended for the formulation of low-VOC two-pack clear and pigmented coatings.
Request Sample Alcon 2375X Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 Alcon 2375X is a medium hydroxyl-content saturated polyester resin, which may be reacted with isocyanates or butylated melamine-formaldehyde resins, to give films exhibiting excellent high temperature end-use yellowing-resistance, excellent overbake yello...展开 Alcon 2375X is a medium hydroxyl-content saturated polyester resin, which may be reacted with isocyanates or butylated melamine-formaldehyde resins, to give films exhibiting excellent high temperature end-use yellowing-resistance, excellent overbake yellowing-resistance, excellent exterior durability, and good flow and gloss. 收起
Request Sample Alcon 560 Allnex - Liquid Coating Resins & Additives + Crosslinkers 液体树脂、助剂和交联剂 Alcon 560 is a high hydroxyl-content saturated polyester resin, which may be reacted with isocyanates, to produce films exhibiting excellent gloss. It is recommended for the formulation of low-VOC two-pack clear and pigmented coatings.
Benester 1051 Benasedo Benester 1051 is used in high-yield coil-coating enamels with very good characteristics of build-up adhesion, flexibility and hardness. This product is slightly branched, with H.B. Naphta/Butylglycol solvent. It has a solids amount of 70%, a viscosity [G....展开 Benester 1051 is used in high-yield coil-coating enamels with very good characteristics of build-up adhesion, flexibility and hardness. This product is slightly branched, with H.B. Naphta/Butylglycol solvent. It has a solids amount of 70%, a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-12, a colour [G.H.] maximum of 2, and an OH solids content of 2.3-2.5%. 收起
Benester 138 Benasedo Benester 138 is used in over-bake colour retention enamels for the exterior of collapsible tubes, cans, spray-bottles and coil-coating systems. This product is slightly blanched and contains 60% solids, an A.V. solids amount of 8-15 and 1.4-1.6% OH solids...展开 Benester 138 is used in over-bake colour retention enamels for the exterior of collapsible tubes, cans, spray-bottles and coil-coating systems. This product is slightly blanched and contains 60% solids, an A.V. solids amount of 8-15 and 1.4-1.6% OH solids. It has a viscosity [G.H.] of Z-Z2 and a colour [G.H.] maximum of 3. 收起
Benester 139 Benasedo Benester 139 is used in industrial baking enamels with very good characteristics of flow, adhesion and gloss. It is also used in clear and base-coatings for the can-coating field. This product is slightly blanched, has the solvent H.B. Naphta/Butylglycol,...展开 Benester 139 is used in industrial baking enamels with very good characteristics of flow, adhesion and gloss. It is also used in clear and base-coatings for the can-coating field. This product is slightly blanched, has the solvent H.B. Naphta/Butylglycol, and contains 60% solids. It has a viscosity [G.H.] of Z-Z1, a colour [G.H.] maximum of 3, an OH solids content of 1.4-1.6, and an A.V. solids amount of 3-8. 收起
Benester 2580 Benasedo Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...展开 Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. 收起
Benester 4209 Benasedo Benester 4209 is used in low-baking enamels (120°C) for industrial applications. It has good adhesion, flexibility, hardness and outdoor resistance and is fully compatible with butylated and methylated melamine resins. This product is branched and a xylen...展开 Benester 4209 is used in low-baking enamels (120°C) for industrial applications. It has good adhesion, flexibility, hardness and outdoor resistance and is fully compatible with butylated and methylated melamine resins. This product is branched and a xylene solvent, with 70% solids. It has a viscosity [G.H.] of Z2-Z3, an A.V. solids content of 8-14, a color [G.H.] maximum of 3, and an OH solids amount of 2,1-2,3%. 收起
Benester 4591 Benasedo Benester 4591 is used in oven-systems where post-formability is required, as in can or coil-coating applications. It is branched, an H.B. Naphta/Butylglycol solvent, and contains 60% solids. This product has a viscosity [G.H.] of X-Y, an A.V. solids of 6-...展开 Benester 4591 is used in oven-systems where post-formability is required, as in can or coil-coating applications. It is branched, an H.B. Naphta/Butylglycol solvent, and contains 60% solids. This product has a viscosity [G.H.] of X-Y, an A.V. solids of 6-12, an colour [G.H.] maximum of 3, and an OH solids amount of 1.6-1.8%. 收起
Benester 602 Benasedo Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...展开 Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. 收起
Benester 618 Benasedo Benester 618 is linear, an H.B. Naphta, and contains 50% solids. It has an A.V. solids amount of 1-3, a color [G.H.] maximum of 3, an OH solids amount of 1.3-1.5%, and a viscosity [G.H.] of Y-Z. Benester 618 is used in highly reactive baking enamels endow...展开 Benester 618 is linear, an H.B. Naphta, and contains 50% solids. It has an A.V. solids amount of 1-3, a color [G.H.] maximum of 3, an OH solids amount of 1.3-1.5%, and a viscosity [G.H.] of Y-Z. Benester 618 is used in highly reactive baking enamels endowed with very good mechanical characteristics, adhesion on aluminum and galvanized steel, and sterilization resistance. 收起
Benester H 82 Benasedo Benester H 82 is used in fast baking cycles for coil-coatings, anticorrosive primers and high performance topcoats for interior. This product is slightly branched, an H.B. Naphta/Esters, with 50% solids. It has a viscosity [G.H.] of W-X, an A.V. solids am...展开 Benester H 82 is used in fast baking cycles for coil-coatings, anticorrosive primers and high performance topcoats for interior. This product is slightly branched, an H.B. Naphta/Esters, with 50% solids. It has a viscosity [G.H.] of W-X, an A.V. solids amount of 2-6, an OH solids level of 1.2-1.4, and a color [G.H.] maximum of 3. 收起
Benester HS87 Benasedo Benester HS87 is used in coil-coating primers and enamels having high-body, good adhesion and gloss. This product has a viscosity [G.H.] amount of Y-Z, an A.V. solids amount of 6-12, a colour [G.H.] maximum of 3, and an OH solids of 2.4-2.6%. It is a Meth...展开 Benester HS87 is used in coil-coating primers and enamels having high-body, good adhesion and gloss. This product has a viscosity [G.H.] amount of Y-Z, an A.V. solids amount of 6-12, a colour [G.H.] maximum of 3, and an OH solids of 2.4-2.6%. It is a Methyl Isobutyl Ketone/Butylglycol solvent and a high - solids linear type. 收起
Benester L 83 Benasedo Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [...展开 Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [G.H.] of Z-Z1, an A.V. solids amount of 2-6, and a color [G.H.] maximum of 3, and an OH solids amount of 1.0-1.2. 收起
Benester PZ 300 Benasedo Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component...展开 Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component polyurethane systems for metals, flexibilizing vehicles for can and coil-coating systems, and tinting pastes for plastics. 收起
Request Sample DYNAPOL® L 206 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance fi...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance finishing. 收起
Request Sample DYNAPOL® L 210 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展开 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展开 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 651 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 850 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展开 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 912 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 912 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coatings, and may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 952 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can ...展开 DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can coatings and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 318-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展开 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展开 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 818-05 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior arch...展开 DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminium primers. It may also be suitable for primers for hot dip galvanized steel. 收起
Request Sample DYNAPOL® LH 820-16 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展开 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展开 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展开 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展开 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 831-24 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may...展开 DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may also be suitable for can coating applications such as metal decorating enamels. 收起
Request Sample DYNAPOL® LH 832-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展开 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展开 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展开 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 415-10 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil c...展开 DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil coating applications like interior architecture and appliance finishing. 收起
Request Sample DYNAPOL® LS 436-12 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展开 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 615 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 615 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for foil primers, printing inks, and heat sealing lacquers.
Request Sample DYNAPOL® P 1500 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® S 1510 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® S 1510 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample Desmophen® 1100 Covestro (formerly Bayer MaterialScience) 科思创 一种无溶剂型饱和聚酯树脂,用于透明和着色双组分聚氨酯涂料。
Request Sample Desmophen® 1388 EA Covestro (formerly Bayer MaterialScience) 科思创 脂肪酸改性饱和聚酯树脂,作为与Desmodur® L 75、IL、HL和N 75的共反应物,用于双组分聚氨酯涂料的配方。
Request Sample Desmophen® 1652 Covestro (formerly Bayer MaterialScience) 科思创 线性羟基聚酯,用于配置柔韧性PU涂料。
Request Sample Desmophen® 1700 Covestro (formerly Bayer MaterialScience) 科思创 一种不含溶剂的支链饱和聚酯树脂,通常仅作为一种可塑性树脂与其它聚酯配合使用。可溶于芳烃,但不溶于脂肪烃。
Request Sample Desmophen® 1800 Covestro (formerly Bayer MaterialScience) 科思创 无溶剂型饱和聚酯树脂,用于柔韧性聚氨酯涂料配方、粘胶和泡沫塑料。
Request Sample Desmophen® 631 MPA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 631 MPA is a saturated polyester resin.
Request Sample Desmophen® 650 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羟基聚酯,通常用作Desmodur N 75的共反应物,制备耐褪色和耐候的双组份聚氨酯涂料
Request Sample Desmophen® 650A 65 PMA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings.
Request Sample Desmophen® 651 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羟基聚酯,通常用作Desmodur N 75的共反应物,制备耐褪色和耐候的双组份涂料
Request Sample Desmophen® 651 MPA/X Covestro (formerly Bayer MaterialScience) 科思创 枝化羟基聚酯,通常用作Desmodur N 75的共反应物,制备耐褪色和耐候的双组份涂料
Request Sample Desmophen® 670 Covestro (formerly Bayer MaterialScience) 科思创 轻度支链化的羟基聚酯,通常用作Desmodur N 75和N 3390的共反应剂,用来配置柔韧的耐侯性能稳定的涂料。
Request Sample Desmophen® 670 BA Covestro (formerly Bayer MaterialScience) 科思创 轻度支链化的羟基聚酯,主要用作Desmodur N 75和N 3390的共反应剂,用来配置耐侯性能稳定的柔韧性涂料。
Request Sample Desmophen® 680 BA Covestro (formerly Bayer MaterialScience) 科思创 羟基聚酯,主要用作Desmodur N的共反应物,用来配置双组分聚氨酯涂料,具有出色的光泽保持性、耐光照和抗粉化特性。也可与Desmodur L和HL联合用于配置快干型双组分涂料。
Request Sample Desmophen® 680 X Covestro (formerly Bayer MaterialScience) 科思创 羟基聚酯,主要用作Desmodur N的共反应物,用来配置双组分聚氨酯涂料,具有出色的光泽保持性、耐光照和抗粉化特性。也可与Desmodur L和HL联合用于配置快干型双组分涂料。
Request Sample Desmophen® 690 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羟基聚酯,通常作为不褪色和耐候的双组份聚氨酯涂料体系中的多醇组份
Request Sample Desmophen® 800 Covestro (formerly Bayer MaterialScience) 科思创 无溶剂型饱和聚酯树脂,与Desmodur CB芳香族聚氨酯联合用于配置双组分聚氨酯涂料。
Request Sample Desmophen® 800 MPA Covestro (formerly Bayer MaterialScience) 科思创 高度支链化的羟基聚酯,用来配置双组分聚氨酯涂料。
Request Sample Desmophen® 850 Covestro (formerly Bayer MaterialScience) 科思创 线性羟基聚酯,与其它等级的Desmophen联合用于配置双组分PU涂料。
Request Sample Desmophen® T 1665 SN/IB Covestro (formerly Bayer MaterialScience) 科思创 无油羟基饱和聚酯,与氨基或交联烘干聚氨酯树脂联合用于配置烘干涂料,例如底漆、汽车表面打底材料、卷材涂料和一般工业涂料,具有良好的耐侯稳定性。
Request Sample Desmophen® T 1775 SN Covestro (formerly Bayer MaterialScience) 科思创 无油,含羟基聚酯,用于制备耐褪色的单组分聚氨酯烤漆
Droplas™ 4010 D.R. Coats Ink & Resins Pvt. Ltd. Droplas™ 4010 is a Oil free saturated polyester resins 65% in solvent C-nine/butyl glycol (70 SNABG).
Ftalon 27/70 ABT Galstaff Multiresine S.p.A. Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起
Ftalon 34/60X Galstaff Multiresine S.p.A. Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood.
Ftalon 45/75 AET 2K-PU saturated polyester Galstaff Multiresine S.p.A. Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening.
Ftalon TAC Galstaff Multiresine S.p.A. Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起
Ftalon TN/100 Galstaff Multiresine S.p.A. Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起
Request Sample GENOMER* 6050/GP Rahn AG GENOMER 1343 (GPTA)中的改性聚酯树脂。用于自由基固化油墨、涂料和粘胶。
Idroben 1057 Benasedo Idroben 1057 is used in water dilutable tinting paste systems for use in clear or pigmented industrial baking coatings.
Idroben 1271 Benasedo Idroben 1271 is used in bake enamels with very good properties of build-up, flow, gloss and hardness. It is also used in exterior base and top-coatings for tubes and cans.
Idroben 1598 Benasedo Idroben 1598 is used in bake clears and enamels for the exterior of tubes, cans and spray bottles. It is also used in general purpose industrial enamels. It is a saturated polyester and is solvent in butylglycol, with a 67% solids content. This product ha...展开 Idroben 1598 is used in bake clears and enamels for the exterior of tubes, cans and spray bottles. It is also used in general purpose industrial enamels. It is a saturated polyester and is solvent in butylglycol, with a 67% solids content. This product has a viscosity [G.H.] of X-Y, an A.V. solids content of 45-55, and has a coour [G.H.] maximum of 2. This product has bake applications. 收起
Idroben 2019 Benasedo Idroben 2019 is used in low VOC, non-yellowing baking primers and finishes endowed with good properties of build-up, flexibility and adhesion. It is a saturated polyester that is a water butylglycol solvent, with 50% solids. This product has a viscosity [...展开 Idroben 2019 is used in low VOC, non-yellowing baking primers and finishes endowed with good properties of build-up, flexibility and adhesion. It is a saturated polyester that is a water butylglycol solvent, with 50% solids. This product has a viscosity [G.H.] of V-W, a pH level of 7.5-8.5, and a colour [G.H.] maximum of 3. This product has bake applications. 收起
Idroben 2063 Benasedo Idroben 2063 is used in low VOC, non-yellowing baking industrial primers and enamels with high mechanical characteristics. This product is a saturated polyester with a water butyl glycol solvent and 50% solids content. It has a viscosity [G.H.] of Z1-Z2, ...展开 Idroben 2063 is used in low VOC, non-yellowing baking industrial primers and enamels with high mechanical characteristics. This product is a saturated polyester with a water butyl glycol solvent and 50% solids content. It has a viscosity [G.H.] of Z1-Z2, a color [G.H.] maximum of 3, and a pH level of 8.5-9.0. This product has bake applications. 收起
Idroben 2443 Benasedo Idroben 2443 is a saturated polyester with no VOC's. Used in non-yellowing baking industrial primers and enamels with very good adhesion and high mechanical characteristics. It is a saturated polyester with a water solvent, and a 50% solids content. This ...展开 Idroben 2443 is a saturated polyester with no VOC's. Used in non-yellowing baking industrial primers and enamels with very good adhesion and high mechanical characteristics. It is a saturated polyester with a water solvent, and a 50% solids content. This product has a viscosity [G.H.] of 6300-14800, a colour [G.H.] maximum of 3, and a pH level of 7,5-8,0. It has bake applications. 收起
Isoben IS 10 Benasedo Isoben IS 10 is used in industrial polyurethane coatings, at low request of polyisocyanate hardener. It is also used in overprint varnishes and provides fast curing and has good compatibility with acrylic resins. This product is a butyl acetate solvent an...展开 Isoben IS 10 is used in industrial polyurethane coatings, at low request of polyisocyanate hardener. It is also used in overprint varnishes and provides fast curing and has good compatibility with acrylic resins. This product is a butyl acetate solvent and has catalyze applications. It has a 70% solids content, an OH solids of 2.5-2.7%, a colour [G.H.] maximum of 3, an A.V. solids amount of 12-22, and a viscosity [G.H.] of Z-Z2. 收起
Isoben IS 11 Benasedo Isoben IS 11 is used in polyurethane wood coatings; particularly suggested for floor varnishes when combined with other hydroxylated pure alkyds, and it has catalyze applications. This product contains 100% solids, has an OH solids amount of 5.9-6.1, a co...展开 Isoben IS 11 is used in polyurethane wood coatings; particularly suggested for floor varnishes when combined with other hydroxylated pure alkyds, and it has catalyze applications. This product contains 100% solids, has an OH solids amount of 5.9-6.1, a color [G.H.] maximum of 3, an A.V. solids content of 2-6, and a viscosity [G.H.] of Z5-Z6. 收起
Isoben IS 12 Benasedo Isoben IS 12 is used in polyurethane wood coatings; particularly suggested for floor varnishes when combined with other hydroxylated pure alkyds, and has catalyze applications. This product has an 100% solids content, a viscosity [G.H.] of Z5-Z6, an A.V. ...展开 Isoben IS 12 is used in polyurethane wood coatings; particularly suggested for floor varnishes when combined with other hydroxylated pure alkyds, and has catalyze applications. This product has an 100% solids content, a viscosity [G.H.] of Z5-Z6, an A.V. solids amount of 5-10, a color [G.H.] maximum of 3, and an OH solids content of 4.6-4.8. 收起
Isoben IS 168 Benasedo Isoben IS 168 is a hydroxylated saturated polyester resin used in enamels for wood and metals. It has good compatibility with acrylic resins, and has nitro and catalyze applications. This product has an OH solids content of 5.1-5.3, a colour [G.H.] solids...展开 Isoben IS 168 is a hydroxylated saturated polyester resin used in enamels for wood and metals. It has good compatibility with acrylic resins, and has nitro and catalyze applications. This product has an OH solids content of 5.1-5.3, a colour [G.H.] solids amount of 3, an A.V. solids level of 10-20, a viscosity [G.H.] of Y-Z1, and a solids content of 80%. 收起
Isoben IS 380 Benasedo A hydroxylated saturated polyester resin used in industrial polyurethane coatings and overprint varnishes. It is fast curing and has good compatibility with acrylic resins, and has catalyze applications. This product contains 70% solids, an OH solids cont...展开 A hydroxylated saturated polyester resin used in industrial polyurethane coatings and overprint varnishes. It is fast curing and has good compatibility with acrylic resins, and has catalyze applications. This product contains 70% solids, an OH solids content of 2.9-3.1, a colour [G.H.] maximum of 3, an A.V. solids amount of 12-18, and a viscosity [G.H.] of Z3-Z5. 收起
Isoben IS 5 Benasedo Isoben IS 5 is used in high chemical resistant polyurethane coatings suggested for use in building industry and maintenance. It also has catalyze applications. This product contains 60% solids, a viscosity [G.H.] of X-Y, an A.V. solids content of 2-6, a c...展开 Isoben IS 5 is used in high chemical resistant polyurethane coatings suggested for use in building industry and maintenance. It also has catalyze applications. This product contains 60% solids, a viscosity [G.H.] of X-Y, an A.V. solids content of 2-6, a colour [G.H.] maximum of 3, and an OH solids content of 8.0-8.2%. 收起
Isoben IS 6 Benasedo Isoben IS 6 is used in polyurethane enamels for wood and metals used in marine and automotive industry coatings when high mechanical and durability resistance are required. It shows good compatibility with acrylic resins, and has catalyze applications. Th...展开 Isoben IS 6 is used in polyurethane enamels for wood and metals used in marine and automotive industry coatings when high mechanical and durability resistance are required. It shows good compatibility with acrylic resins, and has catalyze applications. This product contains 70% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids content of 15-24, an OH solids amount of 4.0-4.2%, and a colour [G.H.[ maximum of 3. 收起
Isoben IS 8 Benasedo Isoben IS 8 is used in polyurethane enamels and clear finishes for wood, particularly suggested for floor varnishes. It is a butyl acetate solvent and has catalyze applications. This product has a solids content of 70%, an OH solids amount of 8.6-8.8%, a ...展开 Isoben IS 8 is used in polyurethane enamels and clear finishes for wood, particularly suggested for floor varnishes. It is a butyl acetate solvent and has catalyze applications. This product has a solids content of 70%, an OH solids amount of 8.6-8.8%, a colour G.H.] maximum of 3, a viscosity [G.H.] of Y-Z1, and an A.V. solids content of 2-6. 收起
Isoben IS 97 Benasedo Isoben IS 97 is used in clear and pigmented finishes for wood, endowed with build-up and hardness. It can also be used in interior/exterior enamels for metals, and has catalyze applications. This product has an OH solids content of 5.1-5.3%, a colour [G.H...展开 Isoben IS 97 is used in clear and pigmented finishes for wood, endowed with build-up and hardness. It can also be used in interior/exterior enamels for metals, and has catalyze applications. This product has an OH solids content of 5.1-5.3%, a colour [G.H.] maximum of 3, a solids level of 0%, a viscosity [G.H.] of Z1-Z2, and an A.V. solids amount of 6-10. 收起
Italester 218 SND Galstaff Multiresine S.p.A. Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起