| ACROCRYL™ 63-972 | Allnex | ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant react...展开 ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant reactive groups on the polymer confer thermal or ambient-temperature crosslinking. 收起 | Request Sample |
| Acronal® 296 D ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，粘度中等。它含有细小、良好分散的颗粒。它与颜填料具有出色的相容性。对颜料具有非常高的粘合力。未着色的Acronal®296 D apare涂膜透明、柔韧、高光泽，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® 296 DS ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 高品质、通用型建筑涂料用乳液聚合物。Acronal® 296 DS ap是一种阴离子型低粘度的乳液聚合物，它由细小的微粒组成。与颜填料有出色的兼容性，具备超强的颜料粘结力。Acronal® 296 DS ap乳液膜在室温下不粘手。Acronal® 296 DS ap乳液膜透明，柔软且有光泽，具有极好的耐水性，且具备出色的耐皂化特性。 | |
| Acronal® 7015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 一种具有中等黏度的细微分散乳液聚合物。它是一种拥有与常用填料及添加物良好兼容性的丙烯酸乳液，同时其对填料有着很好的粘结力。其在20℃左右可形成具有高硬度、高弹性以及很好的抗黏连性特点的膜.Acronal® 7015形成的膜具有优异的耐水性和耐光性，同时对于皂化和风化有着很好的抗性。它有着良好的耐水白性，即使在水中浸泡很长时间变白后仍能回复。 | |
| Acronal® 7016 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 一种阴离子型中等粘度的乳液聚合物。它由细小的微粒组成，是一种拥有优异户外耐久性和耐沾污性的纯丙烯酸共聚物。能使涂膜拥有良好的耐擦洗性、抗粘连性、对混凝土表面有良好的附着力。 | |
| Acronal® 7026 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 良好分散的的聚合物乳液，粘度低。该乳液形成的涂膜在很宽的温度范围内具有高弹性，尤其是在寒冷气候环境下。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®7026形成的涂膜具有出色的耐水、耐碱性能和耐风化性能。Acronal®7026配制的弹性墙面涂料具有良好的耐毛细裂纹，由于采用了紫外表面交联技术，即使在温暖高污染的环境下也具有非常好的耐玷污性能 | |
| Acronal® 7035 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物 Acronal®7035是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成. Acronal®7035具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然 使得涂料具有突出的耐擦洗性 | |
| Acronal® 7037 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 具有极佳耐擦洗性多功能内墙建筑涂料用乳液聚合物,Acronal® 7037是一种不含APEO的低黏度阴离子乳液聚合物。它由细小的乳液粒子组成。Acronal® 7037 具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性。 | |
| Acronal® 7051 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 适用于真石漆和质感涂料的水性聚合物乳液 Acronal®7051是一种具有中等黏度的细微分散乳液聚合物。它是一种与常用颜料及骨料具有良好相容性的纯丙烯酸乳液，同时其具有优异的钙离子稳定性。其涂膜坚韧，具有柔性及抗粘连性。Acronal® 7051形成的膜具高耐水性、耐光性，优异的抗皂化性及耐候性。即使在水中长时间浸泡，涂膜也不会水白。 | |
| Acronal® DS 6266 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 可广泛用于各种乳胶漆和质感面漆的聚合物乳液 Acronal®DS 6266 ap 是一种中等粘度的阴离子型聚合物乳液。它拥有极细的 粒径，能形成无色、透明滑爽的涂膜。产品性能优异，具有良好的抗发白性、低吸水性和高耐候性。 | |
| Acronal® ECO 338 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种细粒径，低黏度的水性乳液。无气味，而且不包含氨水，溶剂及增塑剂。它与常用的颜料与填料展现优异的相容性。形成的涂膜透明，柔性且有光泽，并具备好的耐水性及耐水解性。 | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是低黏度，细小乳胶，无气味，不含氨水及任何溶剂或增塑剂，拥有出色的颜料相容性和粘结能力，而且配方内不需要助成膜助剂。其干膜透明，有光泽和弹性，并有很好的耐水和抗水解性能。 | |
| Acronal® ECO 612 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 全丙烯酸共聚物，用于低光泽建筑涂料。用Acronal®ECO 612 ap形成的涂料能在保持VOC含量接近零的条件下满足严苛性能。由于其出色的附着力和抗粘连性能，Acronal®ECO 612 ap配制的涂料非常适合各种表面类型和应用。另外，Acronal®ECO 612 ap表现出优秀的耐常规家庭污染物的能力 | |
| Acronal® ECO 702 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种阴离子型中等黏度，细小粒径的水性乳胶。拥有优异的颜料和填料的相容性与粘结性能。Acronal ECO 702 ap 在无颜填料时形成的膜透明，有弹性和光泽，并具有出色的耐水和抗皂化性能。 | |
| Acronal® ECO 9056 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，具有中等粘度。它含有细小良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®ECO 9056涂膜可在室温下指干。Acronal®ECO 9056的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® Flex SC 138 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 良好分散的聚合物乳液，粘度低。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®FLEX SC 138形成的涂膜具有出色的耐水、耐碱性能和耐候性。Acronal®FLEX SC 138配制的弹性墙面涂料即使在温暖高污染的环境下也具有良好的耐毛细裂纹以及非常好的耐玷污性能 | |
| Acronal® GS 409 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种低粘度细小粒径聚合物乳液。它与填料和颜料具有优异的相容性，同时具有极高的颜料粘结力。由Acronal GS 409 ap形成的漆膜具有优异的耐水性、耐碱性和耐候性。采用Acronal GS 409 ap配制的弹性涂料能能够提供毛细裂纹的桥接，即使在温暖和污染的环境中，也具有非常出色的耐沾污性。 | |
| Acronal® JC 7043 X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种拥有细小粒径和低粘度的阴离子R-C乳液。它是一 种长链的丙烯酸和苯乙烯共聚物，具备优异的对粉化基材的渗透性和优异的耐碱性，适用于水性渗透性和耐碱性底漆，该底漆可替代溶剂型体系。该产品对粉化砖石基材具有优异的粘结力。 Acronal® JC 7043 适用于制备全效合一水性底漆产品。 | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种阴离子型的分散介质的粘度。该乳液具有非常细的颗粒，提供优良的增稠响应。 ACRONAL®PA510配方的高光泽涂料耐高挡。 ACRONAL®PA510具有优异的湿附着力对木材和任何关键基材，尤其是老化醇酸的基材. | |
| Acronal® PA 807 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 乳液聚合物，耐久、低粘灰，用于高品质户外乳胶漆。Acronal® PA 807 ap是一种阴离子乳液聚合物，粘度中等，含有细小、良好分散的颗粒。它是一种全丙烯酸共聚物具有出色的户外耐久性和良好的耐玷污性能。该聚合物制备的涂膜具有良好的耐擦洗性能，防粘连性能，良好的对圬工表面的附着力以及特别好的湿遮盖力。Acronal® PA 807 ap适合用于制备各种应用的油漆，可配制不同光泽水平。 | |
| Acronal® PS 707 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，具有中等粘度。它含有细小良好溶解的无机盐。它的未着色涂膜光亮、透明、柔韧，具有耐水性和耐皂化性能 | |
| Acronal® PS 719 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PS 719 ap是一种阴离子型乳液聚合物，粘度中等。它含有细小的良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®PS 719涂膜可在室温下指干。Acronal®PS 719的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® PS 791 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 乳液聚合物，用于高品质通用型建筑涂料，Acronal® PS 791 ap是一种阴离子乳液聚合物，粘度低，含有细小、良好分散的颗粒。它具有与颜填料出色的相容性和非常高的颜料粘合力。未着色的Acronal® PS 791 ap涂膜可在室温下指干。Acronal® PS 791 ap形成的涂膜透明、柔韧、光泽高，具有极高的耐水性，和非常好的耐皂化性能 | |
| Acryline® DP | Isogama Industria Quimica Ltda. | Acryline® DP é um dispersante acrílico de alto desempenho. Acryline® DP es un produto utilizado como dispersante de cargas minerais como carbonato de cálcio, pigmentos, caulim entre outros produtos para a construção civil; na indústria de tintas como comp...展开 Acryline® DP é um dispersante acrílico de alto desempenho. Acryline® DP es un produto utilizado como dispersante de cargas minerais como carbonato de cálcio, pigmentos, caulim entre outros produtos para a construção civil; na indústria de tintas como componente para linhas exteriores e interiores e na indústria de papel para aplicações superficiais. 收起 | |
| Acryline® DP EX | Isogama Industria Quimica Ltda. | Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in out...展开 Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in outer and inner rows and paper industry for surface applications. 收起 | |
| Acryline® EA 300 | Isogama Industria Quimica Ltda. | Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: a...展开 Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: alto poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5, aonde se pode observar maior poder de espessamento. 收起 | |
| Acryline® EA 300 EX | Isogama Industria Quimica Ltda. | Acryline® EA 300 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EA 300 EX gives properties such as high thickening power, excellent flatness, great applicability and stability. the ideal pH range for use is between 8.5 to 9.5 where the hig...展开 Acryline® EA 300 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EA 300 EX gives properties such as high thickening power, excellent flatness, great applicability and stability. the ideal pH range for use is between 8.5 to 9.5 where the highest thickening power is observed. The product is compatible with other acrylic or cellulosic thickeners. 收起 | |
| Acryline® EM 33 | Isogama Industria Quimica Ltda. | Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de...展开 Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5 onde se observa maior poder de espessamento. Ele é compatível com outros espessantes acrílicos ou celulósicos de mercado. 收起 | |
| Acryline® EM 33 EX | Isogama Industria Quimica Ltda. | Acryline® EM 33 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EM 33 EX gives properties such as medium thickening power, excellent flatness, great applicability and stability. The ideal pH range for use between 8.5 to 9.5 where the highes...展开 Acryline® EM 33 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EM 33 EX gives properties such as medium thickening power, excellent flatness, great applicability and stability. The ideal pH range for use between 8.5 to 9.5 where the highest thickening power is observed. The product is compatible with other acrylic or cellulosic thickeners. 收起 | |
| Acryline® RA S 50 G3 | Isogama Industria Quimica Ltda. | Acryline® RA S 50 G3 emulsão aquosa de copolímero com base acrílica estireno e compostos de silano. O produto Acryline® RA S 50 G3 atribui propriedades como: filme de excelente plasticidade, brilho, poder adesivo e elevada resistência à água. Apresenta bo...展开 Acryline® RA S 50 G3 emulsão aquosa de copolímero com base acrílica estireno e compostos de silano. O produto Acryline® RA S 50 G3 atribui propriedades como: filme de excelente plasticidade, brilho, poder adesivo e elevada resistência à água. Apresenta boa compatibilidade com a maioria das cargas usualmente empregadas. Por ser uma resina silanizada já encontramos em algumas formulações de tintas com resultados de até 50 % melhores em lavabilidade contra gerações anteriores das resinas (não silanizadas). 收起 | |
| Acryline® RA S 50 G3 EX | Isogama Industria Quimica Ltda. | Acryline® RA S 50 G3 EX is a styrene-acrylic resin water emulsion. The Acryline® RA S 50 G3 EX assigns properties such as excellent film plasticity, brightness, adhesive strength and high resistance to water. It is compatible with most pigments and paint ...展开 Acryline® RA S 50 G3 EX is a styrene-acrylic resin water emulsion. The Acryline® RA S 50 G3 EX assigns properties such as excellent film plasticity, brightness, adhesive strength and high resistance to water. It is compatible with most pigments and paint materials currently employed. 收起 | |
| AR-511 | Chan Sieh Enterprises Co, Ltd. | AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...展开 AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. 收起 | |
| AR-514 | Chan Sieh Enterprises Co, Ltd. | AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aroma...展开 AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| AR-517 | Chan Sieh Enterprises Co, Ltd. | AR-517 is a styrene-acrylic copolymer resin that displays good hardness, high gloss, and good chemical resistance. This product can be used in paints and coatings for road marking, marine, concrete, and interior and exterior wall applications. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AT-3000 | Antex Chemicals (Zhongshan) Limited | AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim c...展开 AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim coating applications. 收起 | |
| AT-3000M | Antex Chemicals (Zhongshan) Limited | AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coat...展开 AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coatings, and as a primer for cement walls. 收起 | |
| AT-3298 | Antex Chemicals (Zhongshan) Limited | AT-3298 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent long term durability. This product can be used in high quality exterior house paints. | |
| AT-3345 | Antex Chemicals (Zhongshan) Limited | AT-3345 is a styrene acrylic copolymer that appears as a milky, white liquid, and has a very fine particle size. This product exhibits excellent penetration into cement substrates and can be used for exterior and interior wall applications. | |
| AT-3413 | Antex Chemicals (Zhongshan) Limited | AT-3413 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product features good compatibility with cement and insulation materials, and can be used in interior and exterior EIFS systems. | |
| AT-3487M | Antex Chemicals (Zhongshan) Limited | AT-3487M is a styrene acrylic copolymer emulsion that appears as a semi-transparent liquid, and features excellent water, alkali, and scrub resistance. This product can be used to make general purpose and cost-effective exterior and interior emulsion pain...展开 AT-3487M is a styrene acrylic copolymer emulsion that appears as a semi-transparent liquid, and features excellent water, alkali, and scrub resistance. This product can be used to make general purpose and cost-effective exterior and interior emulsion paints. 收起 | |
| AT-3875MX | Antex Chemicals (Zhongshan) Limited | AT-3875MX is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and features excellent water and alkali resistance. This product can be used in compendious membrane for water proofing for roof tops, swimming pools, and basements. | |
| AT-6806A | Antex Chemicals (Zhongshan) Limited | AT-6806A is a styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product has high glass transition temperature and good mechanical stability properties. It can be used in coatings and exhibit good resilience and hard hand-feel. | |
| AT-6821A | Antex Chemicals (Zhongshan) Limited | AT-6821A is a styrene acrylic copolymer that appears as a milky, white liquid, and features good adhesion to various substrates. This product can be used for its good water resistance, good hand-feel and fullness. | |
| AT-6854 | Antex Chemicals (Zhongshan) Limited | AT-6854 is a self-cross linking styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product can be used as the back coating for long-pile fabrics, and can provide superb hand-feel and adhesion. | |
| AT-68A | Antex Chemicals (Zhongshan) Limited | AT-68A is a styrene acrylic copolymer emulsion that appears as a milky white with blue liquid. This product has excellent water resistance, scrub resistance, good adhesion to substrates, and is APEO free. It is often used for making general purpose and co...展开 AT-68A is a styrene acrylic copolymer emulsion that appears as a milky white with blue liquid. This product has excellent water resistance, scrub resistance, good adhesion to substrates, and is APEO free. It is often used for making general purpose and cost effective exterior and interior emulsion paint. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| BYD3053 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant....展开 BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3064 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cemen...展开 BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3101 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and...展开 BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...展开 BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3910 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color...展开 BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...展开 BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3998 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3998, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolmer that can be used in exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| Hicoat 61 | Tridev Resins (India) Pvt. Ltd. | Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, glo...展开 Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, gloss and general press performance. 收起 | |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 345 | Hydrite Chemical Co. | HydriCryl 345 is a low molecular weight solution resin for enhancing gloss in coatings and overprint varnishes. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| Joncryl® 8383 (For Industrial Wood Coating Applications) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 莊桥® 8383是一种自交联丙烯酸乳液。优异的户外耐久性。水的渗透性及吸水率低。在油性醇酸漆表面附着好。可推荐用于户外木器，门窗等 | |
| Joncryl® 8386 (For Exterior Industrial Joinery Products) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 新一代自交联乳液，用于室外工业细木产品 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 |
