ADDITOL® VXW 4934 | Allnex | ADDITOL® VXW 4934 is an additive for water-dilutable paints for the prevention of pigment settling, for the improvement of edge crawling at dipping application and for increase of sagging limit at spray application. | Request Sample |
ADDITOL® VXW 6387 | Allnex | 电中性的润湿和抗沉降剂,未添加硅 | Request Sample |
ADDITOL® XL 270 | Allnex | 非离子型润湿和抗沉降助剂 | Request Sample |
AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅,比表面积为200m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、食品和化妆品、电缆复合材料和凝胶、硅树脂橡胶,也用于工厂防护。 | Request Sample |
AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...展开 AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. 收起 | Request Sample |
AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,用聚甲基硅氧烷做后处理。 用于粘胶和密封剂、乙烯环氧树脂和电缆胶衣。 | Request Sample |
AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208是一种经聚二甲硅氧烷处理的气相二氧化硅。它显示了良好的增稠性和在复杂极性液体(如环氧基树脂,聚氨酯或乙烯基树脂等)中良好的触变性。它同时有良好的抗流挂性和出色的耐水性。 | Request Sample |
AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,在Aerosil® 200基础上用辛基硅烷做后处理。 用于油漆和涂料、粘胶和密封剂,以及环氧复合涂料体系。 | Request Sample |
AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,在Aerosil® 300基础上用HMDS做后处理。 用于油漆和涂料、粘胶和密封剂,以及硅树脂橡胶。 | Request Sample |
AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅, 以Aerosil® 200为基础用十六烷基硅烷做后处理。 用于水性涂料。 | Request Sample |
AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅,基于比表面积为130 m2/g的亲水气相二氧化硅,用二甲基二氯硅烷后处理。 | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅,基于比表面积为200 m2/g的亲水气相二氧化硅,用二甲基二氯硅烷后处理。 | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...展开 AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 收起 | Request Sample |
ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中,也具有上述性能 | |
ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
APL-308 | Tianyi Chemical Engineering Material Co., Ltd. | APL-308, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
APL-309 | Tianyi Chemical Engineering Material Co., Ltd. | APL-309, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
Borchi® Gen 911 | OMG Borchers GmbH | 一种溶于烃类溶剂的润湿和分散剂,用于含溶剂油漆,以及油漆颜料糊的制造。可用于所有传统的油漆体系,没有任何不良影响。 | |
Borchi® Set 134 | OMG Borchers GmbH | 抗沉淀助剂,也可作为黏度调节剂。适用于含溶剂的油漆,即便颜料含量很高,也能有效防止沉淀物的形成。 | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展开 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...展开 CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. 收起 | |
CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...展开 CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. 收起 | |
CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...展开 CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. 收起 | |
CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...展开 CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. 收起 | |
CIMA® 230-20 | CHEONGWOO CFC CO., LTD. | CIMA® 230-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seedin...展开 CIMA® 230-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. 收起 | |
CIMA® 240-20 | CHEONGWOO CFC CO., LTD. | CIMA® 240-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seedin...展开 CIMA® 240-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. 收起 | |
CIMA® 290-20 | CHEONGWOO CFC CO., LTD. | CIMA® 290-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has s...展开 CIMA® 290-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability with no seeding formation, and does not influence inter-adhesive properties in system coatings. It can be used for anti-settling and improving the orientation of metallic pigments. Other applications include automotive and refinishing coating systems, alkyd, acrylic, and melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high-build type epoxy-based heavy-duty coatings. 收起 | |
CIMA® 300-20 | CHEONGWOO CFC CO., LTD. | CIMA® 300-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has s...展开 CIMA® 300-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability with no seeding formation, and does not influence inter-adhesive properties in system coatings. It can be used for anti-settling and improving the orientation of metallic pigments. Other applications include automotive and refinishing coating systems, alkyd, acrylic, and melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high-build type epoxy-based heavy-duty coatings. 收起 | |
CIMA® 420-20 | CHEONGWOO CFC CO., LTD. | CIMA® 420-20 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage, and dispersing stability. Applications include short, medium, and long oil alkyd coatings, alky...展开 CIMA® 420-20 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage, and dispersing stability. Applications include short, medium, and long oil alkyd coatings, alkyd and acrylic high temperature baking systems, red lead, zinc chromate, and zinc rich paints, and heat resistant and wash primer coatings. 收起 | |
CIMA®-1000 | CHEONGWOO CFC CO., LTD. | CIMA®-1000 is a high molecular fatty acid ester copolymer anti-settling and flow control additive for organic solvent systems. This soft paste has thixotropic properties in a wide range of coating systems, can be dispersed in a wide range of temperatures,...展开 CIMA®-1000 is a high molecular fatty acid ester copolymer anti-settling and flow control additive for organic solvent systems. This soft paste has thixotropic properties in a wide range of coating systems, can be dispersed in a wide range of temperatures, and has storage stability with no seeding formation. It has no influence on inter-adhesive properties for system coatings, and improves the orientation of metallic pigments. It finds application in automotive and refinishing coating systems, in alkyd and acrylic melamine based general industrial coatings, in alkyd and polyester modified heat resistant coatings, in chlorinated rubber, wash primer, and metallic coatings and in high-build type epoxy-based heavy-duty coatings. 收起 | |
CIMA®-1100 | CHEONGWOO CFC CO., LTD. | CIMA®-1100 is a synthetic wax-based additive for organic solvent systems. This milky white liquid increases surface stability, improves the orientation of mica and aluminum coatings, and has good storage stability. Applications include plastic coatings, a...展开 CIMA®-1100 is a synthetic wax-based additive for organic solvent systems. This milky white liquid increases surface stability, improves the orientation of mica and aluminum coatings, and has good storage stability. Applications include plastic coatings, alkyd and acrylic melamine based general industrial coatings, and both acrylic and acrylic urethane coatings. 收起 | |
CIMA®-1200 | CHEONGWOO CFC CO., LTD. | CIMA®-1200 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It has temperature and storage stability, and improves slip and scratch resistance. It finds application in pl...展开 CIMA®-1200 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It has temperature and storage stability, and improves slip and scratch resistance. It finds application in plastic coatings, in alkyd and acrylic melamine based general industrial coatings, and in both acrylic and acrylic urethane coatings. 收起 | |
CIMA®-1300 | CHEONGWOO CFC CO., LTD. | CIMA®-1300 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of mica and aluminum coatings. It increases surface stability, has good storage stability, and is suitable for polar coatings. It fi...展开 CIMA®-1300 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of mica and aluminum coatings. It increases surface stability, has good storage stability, and is suitable for polar coatings. It finds application in plastic coatings, in solvent-based base coats and metallic top coats, and in automotive and refinishing coating systems. 收起 | |
CIMA®-1310 | CHEONGWOO CFC CO., LTD. | CIMA®-1310 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It increases surface stability, has good storage stability, and improves slip and scratch resistance. It finds...展开 CIMA®-1310 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It increases surface stability, has good storage stability, and improves slip and scratch resistance. It finds application in plastic coatings, in solvent-based base coats and metallic top coats, and in automotive refinishing coating systems. 收起 | |
CIMA®-1400 | CHEONGWOO CFC CO., LTD. | CIMA®-1400 is a solution of a modified urea anti-settling and thixotropic additive for organic solvent systems. This brown, clear liquid is of the rheological type, and has flow control and anti-settling properties. It finds application in architectural, ...展开 CIMA®-1400 is a solution of a modified urea anti-settling and thixotropic additive for organic solvent systems. This brown, clear liquid is of the rheological type, and has flow control and anti-settling properties. It finds application in architectural, industrial, and high-build type heavy-duty coatings. 收起 | |
CIMA®-222 | CHEONGWOO CFC CO., LTD. | CIMA®-222 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has stor...展开 CIMA®-222 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability, no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, marine coatings and high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. 收起 | |
CIMA®-310P | CHEONGWOO CFC CO., LTD. | CIMA®-310P is a high molecule ester compound additive for thixotropics in organic solvent systems. This white powder has thickening properties, improves dispersing properties, and does not influence inter-adhesive properties in system coatings. It can be ...展开 CIMA®-310P is a high molecule ester compound additive for thixotropics in organic solvent systems. This white powder has thickening properties, improves dispersing properties, and does not influence inter-adhesive properties in system coatings. It can be dispersed in a wide range of temperatures and has anti-settling features as an amide-network structure. Applications include tar epoxy and tar urethane coatings, pure epoxy coatings, and alkyd and chlorinated rubber coatings. 收起 | |
CIMA®-320P | CHEONGWOO CFC CO., LTD. | CIMA®-320P is a high molecule ester compound additive for anti-settling, anti-sagging, and thixotropic properties in organic solvent systems. This white powder is compatible, workable, and reduces VOC. It improves inter-adhesive properties and has no seed...展开 CIMA®-320P is a high molecule ester compound additive for anti-settling, anti-sagging, and thixotropic properties in organic solvent systems. This white powder is compatible, workable, and reduces VOC. It improves inter-adhesive properties and has no seeding formation in system coatings. Applications include 2-component epoxy and urethane coatings, chlorinated rubber and vinyl modified resin coatings, and acrylic and alkyd resin coatings. 收起 | |
CIMA®-440 | CHEONGWOO CFC CO., LTD. | CIMA®-440 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage. It finds application in short, medium, and long oil alkyd coatings, in alkyd and acrylic high temp...展开 CIMA®-440 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage. It finds application in short, medium, and long oil alkyd coatings, in alkyd and acrylic high temperature baking systems, in red lead, zinc chromate, and zinc rich paints, in heat resistant and wash primer coatings, and in industrial, marine, and in high-build type heavy-duty coatings. 收起 | |
CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP是一个触变、防沉降剂,可用于低到中等极性体系。为了达到最佳的效率,TIXOGEL® VP应使用高剪切力分散。 | |
CRAYVALLAC® 60P | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating sy...展开 CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings. 收起 | Request Sample |
CRAYVALLAC® 60X | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used i...展开 CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. 收起 | Request Sample |
CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...展开 CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. 收起 | Request Sample |
CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...展开 CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. 收起 | Request Sample |
CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...展开 CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...展开 CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...展开 CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...展开 CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. 收起 | Request Sample |
CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...展开 CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. 收起 | Request Sample |
CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...展开 CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...展开 CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...展开 CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. 收起 | Request Sample |
CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...展开 CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...展开 CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...展开 CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...展开 CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...展开 CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...展开 CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...展开 CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...展开 CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用于溶剂型涂料的高效能添加剂,具有极佳抗沉降与抗流挂效能,特别适用于不含芳香族的涂料配方。 | |
DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 为一分散的聚乙烯蜡防沉剂,取用方便且易于分散的防沈剂。 | |
DeuRheo 202 (20%) | Elementis 海名斯特殊化学 | DeuRheo 202 (20%) is a dispersible polyethylene wax paste anti-settling agent. It can effectively provide pigment sagging performance. | |
DeuRheo 209 | Elementis 海名斯特殊化学 | DeuRheo 209 为一预先分散在溶剂中的聚 胺蜡,能够提供颜填料在涂料体系中的防沉性,以及 防流挂效果。 | |
DeuRheo 211 | Elementis 海名斯特殊化学 | DeuRheo 211 为一分散的聚乙烯蜡防沉剂,取用方便且易于分散的防沈剂。 | |
Dynasylan® 4144 | Evonik Operations GmbH, BL Silanes | 非离子硅氧烷,对各种树脂和溶剂中的填料和颜料具有优异的润湿性和分散性。 | |
E010 | Euchemy Industry Co., Ltd. | E010 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity, thixotropy, and improves flow and leveling to desired products. E010...展开 E010 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity, thixotropy, and improves flow and leveling to desired products. E010 has applications in anti-corrosive paints, industrial paints, adhesives, putty and caulking compounds, primers, undercoats, fillers, foundry paints, and road sign paints. 收起 | |
E027 | Euchemy Industry Co., Ltd. | E027 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for medium to high polarity organic systems and provides increased viscosity, and thixotropy. It also helps control sagging on vertical surfaces a...展开 E027 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for medium to high polarity organic systems and provides increased viscosity, and thixotropy. It also helps control sagging on vertical surfaces and improves flow and leveling. E027 has applications in anti-corrosive paints, anti-fouling paints, marine paints, coil coating systems, adhesive compounds, foundry mould paints, gravure and flexographic printing inks, and industrial finishes. 收起 | |
E038 | Euchemy Industry Co., Ltd. | E038 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems and provides increased viscosity and thixotropy. It also prevents pigment settling during storage, impr...展开 E038 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems and provides increased viscosity and thixotropy. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces. E038 has applications in heavy-duty anti-corrosive pains, anti-fouling paints, marine paints, powder coatings, coil coating systems, adhesives, foundry mould paints, and industrial finishes. 收起 | |
E040 | Euchemy Industry Co., Ltd. | E040 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity and thixotropy. It also prevents pigment settling during storage, imp...展开 E040 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity and thixotropy. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces. E040 has applications in anti-corrosive paints, anti-fouling paints, marine paints, sealants, bituminous paints, adhesives, foundry mould paints, industrial primers, wash primers, and inks. 收起 | |
E057 | Euchemy Industry Co., Ltd. | E057 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides increased viscosity and film thickness. It also prevents pigment settlin...展开 E057 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides increased viscosity and film thickness. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces and paints. E057 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, sealants, adhesives, and inks. 收起 | |
E127 | Euchemy Industry Co., Ltd. | E127 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is ...展开 E127 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E127 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, adhesives, inorganic zinc-rich coatings, and vinyl-paints. 收起 | |
E140 | Euchemy Industry Co., Ltd. | E140 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is ...展开 E140 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E140 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, adhesives, inorganic zinc-rich coatings, and vinyl-paints. 收起 | |
E160 | Euchemy Industry Co., Ltd. | E160 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also...展开 E160 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E160 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, inorganic zinc-rich coatings, vinyl-paints, and adhesives. 收起 | |
E210 | Euchemy Industry Co., Ltd. | E210 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective...展开 E210 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E210 has applications in anti-corrosive paints, marine paints, automotive finishes, industrial paints, and inks. 收起 | |
E217 | Euchemy Industry Co., Ltd. | E217 is an organic derivative of bentonite clay in the form of a very light cream white powder. It is an easily dispersible additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. E21...展开 E217 is an organic derivative of bentonite clay in the form of a very light cream white powder. It is an easily dispersible additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. E217 has applications in anti-corrosive paints, automotive finishes, industrial paints, and inks. 收起 | |
EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 | |
Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | 用于中性和非极性涂料的分散、防沉、防浮色和发花助剂,兼作有机膨润土的凝胶化助剂。 | |
EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...展开 EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. 收起 | |
EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...展开 EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. 收起 | |
EH | Euchemy Industry Co., Ltd. | EH is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EH has applications in water based coatings, emulsion p...展开 EH is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EH has applications in water based coatings, emulsion paints, and water based inks. 收起 | |
EP | Euchemy Industry Co., Ltd. | EP is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EP has applications in water based coatings, emulsion p...展开 EP is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EP has applications in water based coatings, emulsion paints, and water based inks. 收起 | |
EV | Euchemy Industry Co., Ltd. | EV is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EV has applications in water based coatings, emulsion p...展开 EV is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EV has applications in water based coatings, emulsion paints, and water based inks. 收起 | |
HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...展开 HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. 收起 | |
HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...展开 HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为:液态,因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
LX-1776 | Guangzhou Baohui Resin Co., Ltd. | LX-1776 is a wax dispersed in a pigment solvent appearing as a white pulp. This pigment anti-settling agent causes pigments to maintain even dispersion and parallel statues while representing the flashing effect and transition of color flop on metal subst...展开 LX-1776 is a wax dispersed in a pigment solvent appearing as a white pulp. This pigment anti-settling agent causes pigments to maintain even dispersion and parallel statues while representing the flashing effect and transition of color flop on metal substrates. This product is commonly used in silver powder paints, repair paints, and industrial automobile paints. 收起 | |
M-P-A® 1075 | Elementis 海名斯特殊化学 | M-P-A® 1075 为一非反应性、不褪色,软浆状的全天然有机防沉剂 | |
M-P-A® 1078 X | Elementis 海名斯特殊化学 | M-P-A® 1078 X 为高效防沉和防流挂添加剂。以分散于二甲苯的软蜡状提供。 | |
M-P-A® 2000 X | Elementis 海名斯特殊化学 | M-P-A® 2000 X 是一个易操作、高效的有机防沉和防流挂添加剂,该产品以分散在二甲苯中的流动液体供应。 |