UL Prospector

成功!

成功保存搜索结果
Request Sample Ancamide® 2396 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性酰胺胺,可在室温下与液体环氧树脂反应
Request Sample Ancamide® 2426 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 不含增塑剂的酰胺胺,具有长开罐使用时间和出色的抗发白性能,出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆
Request Sample Ancamide® 512 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起
Kingmide 710-SS Sanho Chemical Co., Ltd. Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications.
Kingmide X-2700 Sanho Chemical Co., Ltd. Kingmide X-2700 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide X-2700 is most commonly used in tar-epoxy coating and enamel formulation...展开 Kingmide X-2700 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide X-2700 is most commonly used in tar-epoxy coating and enamel formulation applications. 收起
RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...展开 RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. 收起
RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...展开 RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. 收起