UL Prospector

成功!

成功保存搜索结果
Request Sample Ancamine® 2712 M Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起
Aradur® 36 Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 Aradur® 36是一款水性环氧固化剂,可以与液体环氧树脂一起使用,例如Araldite GY9708-3、GY 776,也可以与环氧乳液一起使用,例如PZ 33757/67,应用于矿物及金属基材。当Aradur® 36与丙烯酸改性环氧搭配使用时,适用于较高耐紫外要求的面漆。 Aradur® 36与液体环氧乳液搭配还适用于环氧混凝土水泥。
Aradur® 38-1 Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilut...展开 Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilutable coatings for application to mineral and metallic substrates. It is particularly suitable for solvent-free dispersion coatings with a high solids content. 收起
Aradur® 3805 Waterborne Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 爱牢固® 3805 环氧固化剂是一种水性胺类固化剂,专为配制双组份室温及加热固化涂料而设计。它与改性及未改性液态环氧树脂 (如爱牢达® GY 9513 环氧树脂及爱牢达® GY9708-3 环氧树脂)均具有相容性。
Aradur® 3984 Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 Aradur® 3984 环氧固化剂是一支脂肪胺改性的水性固化剂,用于配制双组份室温固化或加热固化的涂料配方。 该产品不含有机溶剂,以 80%的水溶液形式供应。该产品可用水稀释,但当稀释至固含量低于 35%时会形成乳状液。
Aradur® 3985 Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 Aradur® 3985环氧固化剂供应方式是55%(重量比)固体在水中,不含有机溶剂或醋酸。该固化剂专为零VOC水性环氧底漆、密封剂、涂料、地坪漆等配方设计。 Aradur® 3985环氧固化剂与改性和未改性环氧树脂相容。基于Aradur® 3985环氧树脂固化剂的配方体系的使用寿命有“可见终点”(凝胶化)。它也可以作为改性剂用于水性固化剂,不会提供使用寿命“可见终点”。
Aradur® 3986 Epoxy Curing Agent Huntsman Advanced Materials 亨斯迈先进材料 爱牢固®3986环氧固化剂是一种胺类固化剂,专门用于配制水可稀释环氧树脂体系。该产品不含挥发性胺类及溶剂,专为配制抗腐蚀底漆(例如,配合水性环氧树脂使用,如爱牢达® PZ 3961-1环氧树脂)及其它水性涂料而开发。爱牢固3986 环氧固化剂具有可见使用期结束的特性(通过粘度上升监测),并能提供快速固化、短表干时间、长操作时间等优势,适用于改性及未改性液体环氧树脂。
Cardanol T-60 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an ...展开 Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of =5000. 收起
Cardanol T-61 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an e...展开 Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of 800-1500. 收起
Cardanol T-62 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an g...展开 Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an good resistance to corrosion, weather, and has a viscosity level of 400-800. 收起
DYHARD® OTB AlzChem AG DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided.
Drolite™ 9040 D.R. Coats Ink & Resins Pvt. Ltd. Drolite™ 9040 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications.
Drolite™ 9041 D.R. Coats Ink & Resins Pvt. Ltd. Drolite™ 9041 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications.
Epoxy Curing Agent GHF2253 Ningbo South Sea Chemical Co., Ltd. Epoxy Curing Agent GHF2253 is a transparent granule or powder that is a phenolic resin that can cure fast under low temperature. This product is used in pure epoxy powder coatings to provide flow and anti-corrosion. It has a softening point of 78-85°C and...展开 Epoxy Curing Agent GHF2253 is a transparent granule or powder that is a phenolic resin that can cure fast under low temperature. This product is used in pure epoxy powder coatings to provide flow and anti-corrosion. It has a softening point of 78-85°C and a solid content of 99%. 收起
Epoxy Curing Agent RD-200 Anshan Runde Fine Chemicals Co., Ltd. Epoxy Curing Agent RD-200 is a water-based epoxy curing agent that is a yellowish transparent liquid used to emulsify liquid epoxy resin. This product has the ability to cure at room or low-baking temperature and features water and alkali resistance. It f...展开 Epoxy Curing Agent RD-200 is a water-based epoxy curing agent that is a yellowish transparent liquid used to emulsify liquid epoxy resin. This product has the ability to cure at room or low-baking temperature and features water and alkali resistance. It finds application in sealers, primers, block fills, masonry coatings, and regular or low temperature bake primers and enamels. 收起
Fujicure 5300 Sanho Chemical Co., Ltd. Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起
Fujicure 5420 Sanho Chemical Co., Ltd. Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起
Fujicure FX-220 Sanho Chemical Co., Ltd. Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起
Fujicure FXD-822 Sanho Chemical Co., Ltd. Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起
Fujicure FXM-823B Sanho Chemical Co., Ltd. Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起
Fujicure FXM-824B Sanho Chemical Co., Ltd. Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起
Fujicure FXR-1030 Sanho Chemical Co., Ltd. Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications.
Fujicure FXR-1081 Sanho Chemical Co., Ltd. Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications.
Fujicure FXR-1090-FA Sanho Chemical Co., Ltd. Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formula...展开 Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formulation applications. 收起
HJT-31A Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good salt-resistance, alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 500-1500. 收起
HJT-31B Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has go...展开 HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-1000. 收起
HJT-31C Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 1000-3000. 收起
HJT-31D Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is...展开 HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is highly impermiable, has good alkali-resistance and salt-resistance. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-600. 收起
Jietonda® K7101 Luan Jietonda Chemical Co., Ltd. Jietonda® K7101 is a tan powdered low temperature curing agent for epoxy and is specially designed for preparing low temperature decorative powders or fast curing functional powders. Due to its exceptional reactivity and catalytic activity, it can be util...展开 Jietonda® K7101 is a tan powdered low temperature curing agent for epoxy and is specially designed for preparing low temperature decorative powders or fast curing functional powders. Due to its exceptional reactivity and catalytic activity, it can be utilized as both a sole curative and an accelerator for other epoxy hardeners. As an accelerator, it can reduce curing temperatures or shorten the curing time of epoxy powders. 收起
Jietonda® K7104 Luan Jietonda Chemical Co., Ltd. Jietonda® K7104 is a pale yellow powdered accelerated DICY curing agent for epoxy powder coatings. It is applied for thick film decorative coatings or functional epoxy powder coatings such as , rebar coatings, pipeline coatings, and FBE coatings. It has a...展开 Jietonda® K7104 is a pale yellow powdered accelerated DICY curing agent for epoxy powder coatings. It is applied for thick film decorative coatings or functional epoxy powder coatings such as , rebar coatings, pipeline coatings, and FBE coatings. It has a good storage stability along with the ability to cure rapidly with mild temperatures around 140℃, and has exceptional mechanical properties with a good chemical resistance. 收起
Jietonda® K7108 Luan Jietonda Chemical Co., Ltd. Jietonda® K7108 is a pale yellow powdered accelerated curing agent for epoxy powder coatings that provides a 150℃/10min low temperature curing or 240℃/2min fast curing. It can be applied to thin film decorative coatings or functional epoxy powder coating...展开 Jietonda® K7108 is a pale yellow powdered accelerated curing agent for epoxy powder coatings that provides a 150℃/10min low temperature curing or 240℃/2min fast curing. It can be applied to thin film decorative coatings or functional epoxy powder coatings, and provide an exceptional appearance with good mechanical properties. 收起
Jietonda® SA2830 Luan Jietonda Chemical Co., Ltd. Jietonda® SA2830 is a micronized, modified DICY that is used as a latent curing agent in pure epoxy powder coatings. It can disperse into liquid resins easily and uniformly. This product can be used individually or in combination with other materials, and...展开 Jietonda® SA2830 is a micronized, modified DICY that is used as a latent curing agent in pure epoxy powder coatings. It can disperse into liquid resins easily and uniformly. This product can be used individually or in combination with other materials, and the suggested curing conditions of this hardener is around 180℃/15min. 收起
Kingcure 100-BD Sanho Chemical Co., Ltd. Kingcure 100-BD is a modified aliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 3000-6000 mPa.s. Kingcure 100-BD is most commonly used in solvent-free coating formulation applications.
Kingcure 2010 Sanho Chemical Co., Ltd. Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起
Kingcure 451-P Sanho Chemical Co., Ltd. Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation...展开 Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation applications. 收起
Kingcure 925 Sanho Chemical Co., Ltd. Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起
Kingcure B-311 Sanho Chemical Co., Ltd. Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起
Kingcure D-211 Sanho Chemical Co., Ltd. Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications.
Kingcure N-768 Sanho Chemical Co., Ltd. Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起
Kingcure N-784 Sanho Chemical Co., Ltd. Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起
Kingcure X-165A Sanho Chemical Co., Ltd. Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起
Kingcure X-166K Sanho Chemical Co., Ltd. Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free co...展开 Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free coating formulation applications. 收起
Kingcure X-963 Sanho Chemical Co., Ltd. Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications.
Kingcure XD-230I Sanho Chemical Co., Ltd. Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-fre...展开 Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-free coating formulation applications. 收起
Kingmide 150-50 Sanho Chemical Co., Ltd. Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications.
Kingmide 300-65 Sanho Chemical Co., Ltd. Kingmide 300-65 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 63-67%. Kingmide 300-65 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305 Sanho Chemical Co., Ltd. Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起
Kingmide 305-31 Sanho Chemical Co., Ltd. Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-31MI Sanho Chemical Co., Ltd. Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-50 Sanho Chemical Co., Ltd. Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-60 Sanho Chemical Co., Ltd. Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-70 Sanho Chemical Co., Ltd. Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-70X Sanho Chemical Co., Ltd. Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 315 Sanho Chemical Co., Ltd. Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起
Kingmide 315-80 Sanho Chemical Co., Ltd. Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 328-A Sanho Chemical Co., Ltd. Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起
Kingmide 334 Sanho Chemical Co., Ltd. Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications.
Kingmide 384-S Sanho Chemical Co., Ltd. Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications.
Kingmide 390-70 Sanho Chemical Co., Ltd. Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applicat...展开 Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applications. 收起
Kingmide 423-HPP Sanho Chemical Co., Ltd. Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation appl...展开 Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation applications. 收起
Kingmide 507-KS Sanho Chemical Co., Ltd. Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications.
Kingmide 513-F Sanho Chemical Co., Ltd. Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications.
Kingmide 581-60 Sanho Chemical Co., Ltd. Kingmide 581-60 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 581-60 is most commonly used in tar-epoxy coating and enamel formulation...展开 Kingmide 581-60 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 581-60 is most commonly used in tar-epoxy coating and enamel formulation applications. 收起
Kingmide 74 Sanho Chemical Co., Ltd. Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起
Nebocure® WAD NECARBO B.V. Nebocure® WAD is a solvent-based polyamide-epoxy adduct that provides excellent mechanical and anticorrosive properties, water resistance, and a fast cure, balanced with a workable potlife. This product finds application in maintenance coatings and genera...展开 Nebocure® WAD is a solvent-based polyamide-epoxy adduct that provides excellent mechanical and anticorrosive properties, water resistance, and a fast cure, balanced with a workable potlife. This product finds application in maintenance coatings and general purpose primers. 收起
Thomide 423 Sanho Chemical Co., Ltd. Thomide 423 is a polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Thomide 423 is most commonly used in fast-curing paint formulation applications.
Tohmide 213-A Sanho Chemical Co., Ltd. Tohmide 213-A is a reactive polyamide epoxy resin curing agent in a yellow-brown-colored viscous liquid form. This product has a total solids content of 48-52%. Tohmide 213-A is most commonly used in fast-curing paint formulation applications.
Tohmide 215-70X Sanho Chemical Co., Ltd. Tohmide 215-70X is a reactive polyamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Tohmide 215-70X is most commonly used in fast-curing paint formulation applications.
Tohmide 215-X Sanho Chemical Co., Ltd. Tohmide 215-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Tohmide 215-X is most commonly used in coating formulation applications.
Tohmide 225-X Sanho Chemical Co., Ltd. Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coati...展开 Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起
Tohmide 225-XX Sanho Chemical Co., Ltd. Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, s...展开 Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起
Tohmide 235-A Sanho Chemical Co., Ltd. Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formul...展开 Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formulation applications. 收起
Tohmide 245 Sanho Chemical Co., Ltd. Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...展开 Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起
Tohmide 245-LP Sanho Chemical Co., Ltd. Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective c...展开 Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective coating formulation applications. 收起
Tohmide 245-S Sanho Chemical Co., Ltd. Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation appl...展开 Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起
Tohmide 252 Sanho Chemical Co., Ltd. Tohmide 252 is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 100-400 mPa.s and a specific gravity of 0.96. Tohmide 252 is most commonly used in adhesive formulation applications.
Tohmide 437 Sanho Chemical Co., Ltd. Tohmide 437 is a polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 73-77%. Tohmide 437 is most commonly used in fast-curing paint formulation applications.
Tohmide 441-A Sanho Chemical Co., Ltd. Tohmide 441-A is a reactive polyamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 82-86%. Tohmide 441-A is most commonly used in corrosion resistant paint formulation applications.
Tohmide HR-11 Sanho Chemical Co., Ltd. Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation appl...展开 Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation applications. 收起
Tohmide TXS-53C Sanho Chemical Co., Ltd. Tohmide TXS-53C is a self-emulsifiable epoxy curing agent in a yellow-brown liquid form. This product has a viscosity of 3000-12,500 mPa.s. Tohmide TXS-53C is most commonly used in concrete primer formulation applications.
Request Sample VESTALITE® S 101 Evonik Resource Efficiency GmbH, BL Crosslinkers VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展开 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起
Request Sample VESTALITE® S 102 Evonik Resource Efficiency GmbH, BL Crosslinkers VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展开 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起
Request Sample Waterborne Epoxy Curing Agent SM6080 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6080 是一种环境友好型低粘度脂族胺改性的水性环氧固化剂。它具有良好的韧性。附着力好,施工气味低,丰满度好,耐水性好。广泛应用于环氧地坪等领域。