成功!

成功保存搜索结果
Bluesil™ ADD 10086 Bluestar Silicones Bluesil™ ADD 10086 is a polydimethylsiloxane gum and solvent solution developed to provide hammer effects in industrial coatings. This clear liquid is suitable for use in thixotropic and classical polyurethane bases, thixotropic alkyd paints, and silicone...展开 Bluesil™ ADD 10086 is a polydimethylsiloxane gum and solvent solution developed to provide hammer effects in industrial coatings. This clear liquid is suitable for use in thixotropic and classical polyurethane bases, thixotropic alkyd paints, and silicone binders. 收起
Borchi® Gol 3451 OMG Borchers GmbH 用于锤纹等特殊效果和结构漆的添加剂。
CERAFLOUR® 914 Byk 毕克 微粉化改性聚丙烯蜡,用于水性和溶剂型油漆体系的表面织纹化。
CERAFLOUR® 915 Byk 毕克 微粉化改性聚丙烯蜡,用于水性和溶剂型油漆体系的表面织纹化。
CERAFLOUR® 916 Byk 毕克 改性HDPE蜡/聚合物的微粉化蜡混合物,用于水性和溶剂型油漆的表面织纹化。
CERAFLOUR® 967 Byk 毕克 用于粉末涂料的表面纹理修饰的合成聚合物。
CERAFLOUR® 968 Byk 毕克 微粉化P.T.F.E.改性聚乙烯蜡,用于粉末涂料的表面织纹化。
CERAFLOUR® 969 Byk 毕克 微粉化P.T.F.E.改性聚乙烯蜡,用于粉末涂料的表面织纹化。
Request Sample DMAE Elementis Specialties 海名斯特殊化学 DMAE 为一高效的胺中和剂。可作为 pH 值调整、稳定及辅助溶剂等效能。
Request Sample DeuAdd DVP Elementis Specialties 海名斯特殊化学 DeuAdd DVP 可保持气干油漆与烘漆的粘度安定,防止胶化的发生,并能使已胶化的涂料再回复原来可用的粘度。
Request Sample DeuAdd EA-87 Elementis Specialties 海名斯特殊化学 DeuAdd EA-87 为降低涂料电阻的溶剂型导电度增进剂。
Request Sample DeuAdd HM-6 Elementis Specialties 海名斯特殊化学 DeuAdd HM-6 为聚硅氧烷锤纹剂,以较低添加量即可使多种铝浆涂料产生更细致的三维效果。
Request Sample DeuAdd MA-95 Elementis Specialties 海名斯特殊化学 DeuAdd MA-95 为低气味多功能胺中和剂,兼具酸碱值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。
Request Sample DeuAdd MB-11 Elementis Specialties 海名斯特殊化学 DeuAdd MB-11 为一广效性的杀菌防腐剂产品。可提供优秀的抑菌、杀菌效果。在乳液、乳胶漆、水性涂料等大多数水性体系都可得到广泛应用
Request Sample DeuAdd MB-16 Elementis Specialties 海名斯特殊化学 DeuAdd MB-16 为一广效性的防腐剂产品。可提供优异的杀菌、防霉效果。在水性体系可广泛应用。
Request Sample DeuWax 2310 Elementis Specialties 海名斯特殊化学 DeuWax 2310 为一预分散聚乙烯蜡浆,可赋予涂膜较佳的耐磨耗及抗刮伤性能。
Request Sample DeuWax FA-110 Elementis Specialties 海名斯特殊化学 DeuWax FA-110 为一优异的消光浆可降低涂膜光泽,并有促进涂面平滑的效用。
Request Sample DeuWax FA-115 Elementis Specialties 海名斯特殊化学 DeuWax FA-115 为一优异的消光浆,可降低涂膜光泽,并有促进涂面平滑的效用。
Request Sample DeuWax FA-2120 Elementis Specialties 海名斯特殊化学 DeuWax FA-2120 为一优异的消光蜡浆,可赋予涂膜较佳的耐磨耗及抗划伤性能。
Request Sample DeuWax W-2335A Elementis Specialties 海名斯特殊化学 DeuWax W-2335A 为一乳化型水性聚乙烯蜡浆,无需研磨可以在调墨的任何阶段添加,搅拌均匀后稳性分散即可。应用在油墨及水性涂料的光泽影响很小,提供良好的耐磨性和抗粘连性。
Dow Corning® 61 Paint Additive Dow Corning Corporation 道康宁 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...展开 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone 收起
Request Sample Dynoadd® P-506 Dynoadd by Dynea 太尔化工 Dynoadd P-506是一种单分散、球型颗粒添加剂,能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致,确保每一个颗粒都能发挥出良好的效果,与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为6微米。
Request Sample Dynoadd® P-510 Dynoadd by Dynea 太尔化工 Dynoadd P-510是一种单分散、球型颗粒添加剂,能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致,确保每一个颗粒都能发挥出良好的效果,与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为10微米。
Request Sample Dynoadd® P-515 Dynoadd by Dynea 太尔化工 Dynoadd P-515是一种单分散、球型颗粒添加剂,能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致,确保每一个颗粒都能发挥出良好的效果,与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为15微米。
Request Sample Dynoadd® P-520 Dynoadd by Dynea 太尔化工 Dynoadd P-520是一种单分散、球型颗粒添加剂,能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致,确保每一个颗粒都能发挥出良好的效果,与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为20微米。
Request Sample Dynoadd® P-530 Dynoadd by Dynea 太尔化工 Dynoadd P-530是一种单分散、球型颗粒添加剂,能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致,确保每一个颗粒都能发挥出良好的效果,与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为30微米。
Request Sample Dynoadd® P-540 Dynoadd by Dynea 太尔化工 Dynoadd® P-540是一种单分散、球型颗粒添加剂,能够产生细而均匀的涂膜纹理。粒子具有极窄的粒度分布,以确保每一个颗粒都能发挥应有的效果,因而比其它竞争技术降低了添加量。它们可以改善抗刮擦性,并赋予永久的滑爽度。Dynoadd® P-540具有40微米的粒度。 所述颗粒可用于溶剂型、水性和光固化涂料配方中。典型的应用是卷材涂料、家用电器、化妆品包装、手机、汽车内饰、机械外壳、木器涂料以及光学涂层。
Eutex 127 Eutec Chemical Co., Ltd. Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers.
Eutex KCB Eutec Chemical Co., Ltd. Eutex KCB is a yellow-green crystalline powder and an efficient optical brightener for a variety of resins. This product assures whitening without any bleeding and is solvent-soluble enough to be applied to paints.
Eutex KSN Eutec Chemical Co., Ltd. Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展开 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起
Eutex OB Eutec Chemical Co., Ltd. Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展开 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起
Glass Beads, Type I Sino-American Pigment Systems, Inc. Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. ...展开 Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. Its density lies between 2.4 and 2.6 g/cm3 and its refractive index is greater than 1.5. 收起
Glass Beads, Type III Sino-American Pigment Systems, Inc. Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 an...展开 Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 and 2.6 g/cm3 and its compressive strength is greater than 1200N. 收起
HX-6010 Zhuhai Huaxia Paint Co., Ltd. HX-6010, in the form of a transparent, colorless liquid, is a polysiloxane solution. This product can be used as a hammer agent in solvent-based coatings. It can be used as a surface conditioner to make the pattern of aluminum even, beautiful, and three...展开 HX-6010, in the form of a transparent, colorless liquid, is a polysiloxane solution. This product can be used as a hammer agent in solvent-based coatings. It can be used as a surface conditioner to make the pattern of aluminum even, beautiful, and three-dimensional. 收起
HX-6110 Zhuhai Huaxia Paint Co., Ltd. HX-6110, in the form of a transparent, colorless liquid, is a polysiloxane solution. This product can be used as a hammer agent in solvent-based coatings. It can be used as a surface conditioner to make the pattern of aluminum even, beautiful, and three-d...展开 HX-6110, in the form of a transparent, colorless liquid, is a polysiloxane solution. This product can be used as a hammer agent in solvent-based coatings. It can be used as a surface conditioner to make the pattern of aluminum even, beautiful, and three-dimensional. 收起
Jietonda® K7301 Luan Jietonda Chemical Co., Ltd. Jietonda® K7301 is a white free-flowing fine powdered special additive that is designed to be used in metal effect powder coatings. This product can prevent coating powders from agglomerating during the bonding process with metal powders. It can be used i...展开 Jietonda® K7301 is a white free-flowing fine powdered special additive that is designed to be used in metal effect powder coatings. This product can prevent coating powders from agglomerating during the bonding process with metal powders. It can be used in all powder coating systems including PES, Epoxy and Hybrid to reduce the dosage of metal pigments and improve the metal effect of a coating film. K7301 can also improve the resistance to damp heat and salt fog of metal effect coatings. 收起
Jietonda® SA207 Luan Jietonda Chemical Co., Ltd. Jietonda® SA207 is a off-white very fine powdered special textured additive which can be used in powder coatings for IT equipment, office appliance, household appliances and other industrial applications. The finished product has a very attractive and con...展开 Jietonda® SA207 is a off-white very fine powdered special textured additive which can be used in powder coatings for IT equipment, office appliance, household appliances and other industrial applications. The finished product has a very attractive and consistent texture even if the use level is low. 收起
Jietonda® SA2072 Luan Jietonda Chemical Co., Ltd. Jietonda® SA2072 is a low cost, off-white very fine powdered pre-dispersed texture additive that is used in powder coatings to provide a fine grain finished surface. It can be used with any powder coating systems such as pure epoxy, hybrid, PES/TGIC or PE...展开 Jietonda® SA2072 is a low cost, off-white very fine powdered pre-dispersed texture additive that is used in powder coatings to provide a fine grain finished surface. It can be used with any powder coating systems such as pure epoxy, hybrid, PES/TGIC or PES/HAA and PU. Flow modifiers and Benzoin can be ommitted or decreased to lower the cost of the powder coating. 收起
Jietonda® SA208 Luan Jietonda Chemical Co., Ltd. Jietonda® SA208 is a pale yellow fine powdered organic-metallic compound, which can be utilized as a texture additive for powder coatings to create special texture finishes such as reticulated, wrinkly, embossed, vein and grained appearances. It can be us...展开 Jietonda® SA208 is a pale yellow fine powdered organic-metallic compound, which can be utilized as a texture additive for powder coatings to create special texture finishes such as reticulated, wrinkly, embossed, vein and grained appearances. It can be used in epoxy or epoxy/polyester hybrid systems and the final patterns are greatly affected by baking conditions. The proper conditions adopted should be selected by your experiments such as fast or slow rate baking at different temperatures. 收起
METOLAT® 150/100 Munzing Chemie METOLAT® 150/100 is a clear liquid based on silicone oil (APEO-free). METOLAT® 150/100 is an additive for all common solvent systems. It aids in eliminating pinholes, effective in air-drying and stoving paints, and is specifically chosen for use with EDAP...展开 METOLAT® 150/100 is a clear liquid based on silicone oil (APEO-free). METOLAT® 150/100 is an additive for all common solvent systems. It aids in eliminating pinholes, effective in air-drying and stoving paints, and is specifically chosen for use with EDAPLAN® LA 106 HF. 收起
Natural Rock-Chip Shouxian Xinfa Mining Industry Co., Ltd. Natural Rock-Chip is an important component of mixed rock, and is derived from stones whose structure is evidently different from the ground mass and lithology of surrounding rock chips. This product appears as a black, speckled flake. It can be used in...展开 Natural Rock-Chip is an important component of mixed rock, and is derived from stones whose structure is evidently different from the ground mass and lithology of surrounding rock chips. This product appears as a black, speckled flake. It can be used in stone-like coatings, granite coatings and interior wall paint. 收起
POWDERMATE® 508TEX Troy Asia Company 特洛伊特种化学品 精细粉末状添加剂,后添加到粉末涂料中,可以得到裂纹或锤纹及其它特殊的效果。
PowderTEX 61 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 PowderTEX 61 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 61 is used in baked coatings for powder systems.
PowderTEX 94 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 高级结晶PTFE,在干混阶段加入,随后挤出。可产生半光桔皮纹理效果。
Raybo 66 AquaHamR Raybo Chemical Raybo 66 AquaHamR is a silicone-based hammer additive in a cloudy liquid form. This product is most commonly used to provide reproducible hammer patterns in solvent-based paint applications.
Raybo 88 HamR Raybo Chemical Raybo 88 HamR is a silicone-based hammer additive in a clear liquid form. This product is most commonly used to provide hammertone patterns in non-leafing solvent-based aluminum coating system applications.
Sand-Texture Agent SW301B Ningbo South Sea Chemical Co., Ltd. Sand-Texture Agent SW301B is a very fine mean particle sized white powder or floccus that is a pure polytetrafluoroethylene. This product can produce strong texture effect film when the product is applied in powder coatings. It is applicable to all kinds ...展开 Sand-Texture Agent SW301B is a very fine mean particle sized white powder or floccus that is a pure polytetrafluoroethylene. This product can produce strong texture effect film when the product is applied in powder coatings. It is applicable to all kinds of powder coatings with low dosage and capable of providing distinct textured finishes. It has a melting point of 320°C and a density of 1.10-1.30KG/L. 收起
Sand-Texture Agent SW301C Ningbo South Sea Chemical Co., Ltd. Sand-Texture Agent SW301C is a white powder that is a kind of polytetrafluoroethylene diluted and dispersed with wax. This product can produce strong texture effect film applied in powder coatings. It is applicable to all kinds of powder coatings with low...展开 Sand-Texture Agent SW301C is a white powder that is a kind of polytetrafluoroethylene diluted and dispersed with wax. This product can produce strong texture effect film applied in powder coatings. It is applicable to all kinds of powder coatings with low dosage and capable of providing distinct textured finishes. 收起
Special Agent XG605-1A Ningbo South Sea Chemical Co., Ltd. Special Agent XG605-1A is a yellowish powder that is an organic metallic complex designed to create wrinkle powder coatings. This product is most commonly applied to epoxy and hybrid powder coating systems.
Request Sample TEGO® Hammer 501 Evonik Resource Efficiency GmbH, TEGO Products 赢创工业集团-迪高涂料助剂
Texture 5374W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...展开 Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. 收起
Texture 5378W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture 5380W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture 5382W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture 5384W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture 5386W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture 5388W (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
Texture Ultrafine (Polyethylene Powder) Shamrock Technologies, Inc. 三叶科技 由优等结晶聚乙烯组成。它们是拌和型粉末,抗溶剂;在所有类型的液体涂料中稳定并且相容。用于自干型、强制干燥型和烘干瓷漆。
YCK-7010 YCK CHEMICAL 毅克化学(上海)科技有限公司 YCK-7010是一种高分子硅酮锤纹剂,以较低添加量即可使多种铝浆涂料产生更细致的立体感效果。
YCK-7020 YCK CHEMICAL 毅克化学(上海)科技有限公司 YCK-7020是聚硅氧烷溶液锤纹剂,主要用于多种铝浆涂料并产生强烈的立体感效果。