| BDT-1006 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where with...展开 BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 377°C. 收起 | |
| BDT-1015 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withst...展开 BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withstanding exposure to the hardest of conditions is paramount. BDT-1015 is also great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 372°C 收起 | |
| BDT-4330 | Bomar, formerly Dymax Oligomers & Coatings | BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where wit...展开 BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 397° 收起 | |
| BR-1041MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to ad...展开 BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality, and tin-free nature make this an excellent choice for consumer applications with low irritancy. 收起 | |
| BR-1043MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity ...展开 BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity versus similar polyether chemistries. The oligomer exhibits a higher degree of heat resistance vs other polyether oligomers. The high biobased backbone and methacrylate functionality make this an excellent candidate for consumer applications with low irritancy requirements. 收起 | |
| BR-116 | Bomar, formerly Dymax Oligomers & Coatings | BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in...展开 BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in common monomers. 收起 | |
| BR-144B | Bomar, formerly Dymax Oligomers & Coatings | BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limite...展开 BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limited to these fields, BR-144B is an effective choice in wood and furniture applications, along with abrasion-resistant overprint varnishes. This material has low skin sensitivity for dental and cosmetic applications. 收起 | |
| BR-144H15 | Bomar, formerly Dymax Oligomers & Coatings | BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings...展开 BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings requiring additional cure speed with multifunctional oligomers. 收起 | |
| BR-202 | Bomar, formerly Dymax Oligomers & Coatings | BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elong...展开 BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-202 is also of value for its low initial color (despite its aromatic nature). 收起 | |
| BR-204 | Bomar, formerly Dymax Oligomers & Coatings | BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elo...展开 BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-204 is also of value for its low initial viscosity and low color (despite its aromatic nature). 收起 | |
| BR-302 | Bomar, formerly Dymax Oligomers & Coatings | BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in ...展开 BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in an affordable oligomer. 收起 | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...展开 BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. 收起 | |
| BR-344 | Bomar, formerly Dymax Oligomers & Coatings | BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in fl...展开 BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in flexible yet durable, abrasion-resistant, non-yellowing systems of moderate- to low-viscosity. 收起 | |
| BR-345 | Bomar, formerly Dymax Oligomers & Coatings | BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins ...展开 BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%. 收起 | |
| BR-371B | Bomar, formerly Dymax Oligomers & Coatings | BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yiel...展开 BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yield hard, clear, low-yellowing films. This is a reduced MEHQ version of BR-371S. 收起 | |
| BR-371MS | Bomar, formerly Dymax Oligomers & Coatings | BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-3...展开 BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-371MS provides very low color and high viscosity, is ideal for hard gel nail coatings, and offers reduced heat generation vs other high tensile strength materials. 收起 | |
| BR-372 | Bomar, formerly Dymax Oligomers & Coatings | BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety...展开 BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety of plastics, and can also be used in the manufacture of UV-curable fiberglass matrix resins. This material has low skin sensitivity for dental and cosmetic applications. 收起 | |
| BR-374 | Bomar, formerly Dymax Oligomers & Coatings | BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhes...展开 BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhesion to a variety of substrates, making it ideal for laminating applications. 收起 | |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...展开 BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). 收起 | |
| BR-3747AE | Bomar, formerly Dymax Oligomers & Coatings | BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (P...展开 BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (PVC). This unique product adheres well to a variety of metals, glass, and plastics. It is also an excellent candidate for consideration in UV light-curable PSA as a co-oligomer. 收起 | |
| BR-441BI20 | Bomar, formerly Dymax Oligomers & Coatings | BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overp...展开 BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overprint varnishes, high tensile strength 3D printing resins, and low-yellowing coating. 收起 | |
| BR-5413MB | Bomar, formerly Dymax Oligomers & Coatings | BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candida...展开 BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact-resistant coatings and provides low color and excellent non-yellowing performance. 收起 | |
| BR-541MB | Bomar, formerly Dymax Oligomers & Coatings | BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use...展开 BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use in impact-resistant coatings on various substrates when used with BR-543MB. This material has low skin sensitivity and is INCI registered for compliance in cosmetic applications. 收起 | |
| BR-541S | Bomar, formerly Dymax Oligomers & Coatings | BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice f...展开 BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice for impact-resistant coatings. BR-541S is desirable for use in cosmetic applications where color stability and optically clear tough coatings are needed. 收起 | |
| BR-543 | Bomar, formerly Dymax Oligomers & Coatings | BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing ...展开 BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. 收起 | |
| BR-543MB | Bomar, formerly Dymax Oligomers & Coatings | BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oli...展开 BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oligomer, BR-543MB can be used to improve an existing formulation’s glass adhesion. This product is listed in the INCI directory to meet cosmetic regulatory guidelines and has low skin sensitivity. 收起 | |
| BR-543TF | Bomar, formerly Dymax Oligomers & Coatings | BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion charact...展开 BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. This product shows a high degree of crystallinity at room temperature. 收起 | |
| BR-551M | Bomar, formerly Dymax Oligomers & Coatings | BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high...展开 BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. 收起 | |
| BR-551ME | Bomar, formerly Dymax Oligomers & Coatings | BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has hig...展开 BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss, and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. 收起 | |
| BR-5541M | Bomar, formerly Dymax Oligomers & Coatings | BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and ...展开 BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and rebound versus similar high elongation materials. The low modulus of the material allows for a high degree of flexibility comparable to silicone-based materials such as BRS-14320S, but with improved compatibility and surface cure. The compressibility of the material also offers potential usage in gasket and sealing applications. 收起 | |
| BR-571 | Bomar, formerly Dymax Oligomers & Coatings | BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with ...展开 BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with the addition of heat or monomer. Formulations using BR-571 often have a unique blend of toughness and flexibility. 收起 | |
| BR-571MB | Bomar, formerly Dymax Oligomers & Coatings | BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB als...展开 BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. 收起 | |
| BR-581MT | Bomar, formerly Dymax Oligomers & Coatings | BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-...展开 BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating nail applications, please see our sell sheet for a starting point formula. 收起 | |
| BR-5825I30 | Bomar, formerly Dymax Oligomers & Coatings | BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weath...展开 BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weatherability. 收起 | |
| BR-582E8 | Bomar, formerly Dymax Oligomers & Coatings | BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact ...展开 BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. 收起 | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...展开 BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. 收起 | |
| BR-641D | Bomar, formerly Dymax Oligomers & Coatings | BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties t...展开 BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene, and Polypropylene. 收起 | |
| BR-641E | Bomar, formerly Dymax Oligomers & Coatings | BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to t...展开 BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties. 收起 | |
| BR-643 | Bomar, formerly Dymax Oligomers & Coatings | BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-...展开 BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-643 withstands the extremes of temperature typical of such tests, without undue degradation of properties. 收起 | |
| BR-741 | Bomar, formerly Dymax Oligomers & Coatings | BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effec...展开 BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effective protective coating, which will be non-yellowing, due to the aliphatic backbone of BR-741. 收起 | |
| BR-741MD1 | Bomar, formerly Dymax Oligomers & Coatings | BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. Th...展开 BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. This oligomer is also perfect for UV & LED nail gel coatings because this material has low skin sensitivity and is INCI listed. 收起 | |
| BR-742M | Bomar, formerly Dymax Oligomers & Coatings | BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nai...展开 BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nail coating applications. It can also be effectively formulated for adhesion to steel, aluminum, and glass. Due to its low solvent resistance, it can be formulated into solvent strippable temporary coatings. This material has low skin sensitivity for dental and cosmetic applications. 收起 | |
| BR-742MS | Bomar, formerly Dymax Oligomers & Coatings | BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, dur...展开 BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, durability, and low heat generation during the cure process. 收起 | |
| BR-742S | Bomar, formerly Dymax Oligomers & Coatings | BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent f...展开 BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications. 收起 | |
| BR-7432GB | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an exce...展开 BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an excellent balance of weathering, solvent resistance, tensile strength, and adhesion properties. BR-7432GB is an incredibly tough, elastomeric material with similar mechanical performance to cast urethanes, and can provide excellent impact resistance and weatherability to formulations. BR-7432GB also has low MeHQ for nail gel polish applications. 收起 | |
| BR-7432GI30 | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended...展开 BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended weatherability studies. It is an excellent choice for impact and bend resistant coatings, and can act as an impact modifier for composite applications. 收起 | |
| BR-744BT | Bomar, formerly Dymax Oligomers & Coatings | BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail ge...展开 BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail gel polishes. This material has low skin sensitivity for dental and cosmetic applications and is INCI listed. 收起 | |
| BR-744SD | Bomar, formerly Dymax Oligomers & Coatings | BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can...展开 BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier and is a perfect choice for optically clear UV-PSAs. 收起 | |
| BR-771F | Bomar, formerly Dymax Oligomers & Coatings | BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-...展开 BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-771F can exhibit superior toughness properties with a high Tg. Its inherently low color and aliphatic backbone make BR-771F an excellent candidate for polycarbonate coatings and adhesives. 收起 | |
| BR-930D | Bomar, formerly Dymax Oligomers & Coatings | BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkje...展开 BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkjet, and DLP printers. 收起 | |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...展开 BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. 收起 | |
| BR-952 | Bomar, formerly Dymax Oligomers & Coatings | BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is a...展开 BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is also used in coatings for construction applications when improved toughness is desired for excellent durability. BR-952 provides an inherently high HDT of 143°C and a Tg of 153°C, and is inherently tin-free. 收起 | |
| BR-970BT | Bomar, formerly Dymax Oligomers & Coatings | BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance...展开 BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance is required. 收起 | |
| BR-970H | Bomar, formerly Dymax Oligomers & Coatings | BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowin...展开 BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well as for use in graphic arts application. 收起 | |
| BR-990 | Bomar, formerly Dymax Oligomers & Coatings | BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by ...展开 BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by higher functionality materials of the same product line. In addition, BR-990 offers one of the lowest viscosity profiles of any urethane acrylate. 收起 | |
| BRC-441D | Bomar, formerly Dymax Oligomers & Coatings | BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated i...展开 BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications. 收起 | |
| BRC-4421 | Bomar, formerly Dymax Oligomers & Coatings | BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated ...展开 BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture-sensitive or hydrophobic applications. 收起 | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...展开 BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. 收起 | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...展开 BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. 收起 | |
| BRC-841 | Bomar, formerly Dymax Oligomers & Coatings | BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The l...展开 BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings. 收起 | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...展开 BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. 收起 | |
| BRC-8430E | Bomar, formerly Dymax Oligomers & Coatings | BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellen...展开 BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing. 收起 | |
| BRC-843S | Bomar, formerly Dymax Oligomers & Coatings | BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the subst...展开 BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. 收起 | |
| BRC-843SD1 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the subs...展开 BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. 收起 | |
| BRS-14320S | Bomar, formerly Dymax Oligomers & Coatings | BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S ...展开 BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications. 收起 | |
| Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasio...展开 Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. 收起 | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...展开 LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. 收起 | |
| LumiSet™ LSR-241 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that...展开 LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance, gloss, and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, gloss, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241 should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241 is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiator. 收起 | |
| LumiSet™ LSR-241P | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin th...展开 LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less. 收起 | |
| MechT E35A | Bomar, formerly Dymax Oligomers & Coatings | MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate (UDMA), BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resisti...展开 MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate (UDMA), BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resistivity. When compared to FDM-printed ESD parts, ESD resins produced with MechT E35A can achieve fully isotropic conductivity with high resolution and isotropic mechanical properties. 收起 | |
| SiSiB® PC1100 | SiSiB SILICONES | SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and r...展开 SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and resins concrete, etc; it maximizes the physical and electrical properties of mineral-filled phenolics, epoxies, polyamides, polybutylene terephthalate, and a host of other thermoset and thermoplastic composites; improves adhesion between magnetic powder and organic resins and dispersion of magnetic powder inorganic resins; improves pigment dispersion and maximizes adhesion to glass, aluminum, and steel with nitrile, polysulfide, epoxy, urethane, and adhesives and sealants; imparts moisture resistance and allows recovery after compression when used as a phenolics resin binder additive in glass fiber and mineral wool insulation; strengthens the bond between the phenolics binder and foundry sand in shell molding foundry applications; promotes an improved, water-resistant bond between the abrasive grit and phenolics resin binder in grinding wheels; and works as an adhesion promoter in urethane, epoxy, and acrylic latex coatings, adhesives, and sealants. 收起 | |
| SiSiB® PC1108 | SiSiB SILICONES | SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural s...展开 SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural strength, tensile strength, impact strength and modulus of elasticity; moisture and corrosion resistance; adhesion; or filler dispersion. It can be used for applications including glass fiber/glass fabric composites; metal primers; as additive to phenolic resin binders for mineral fiber insulating materials and abrasives; as additive to phenolic, furane and melamine resins; as a primer or additive in sealants and adhesives; as mineral-filled polymers (composites) or HFFR cables; as pretreatment of fillers and pigments; or for improvement of adhesive to the substrate in paints and coatings. 收起 | |
| SiSiB® PC1110 | SiSiB SILICONES | SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used...展开 SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy, and phenol); improve the wet resistance and mechanical performance in the glass wool and FRP products when added in to phenol resins; promote adhesion in RTV silicones and other hybrid sealants including SPURSM technology, particularly for difficult substrates such as ABC, PVC ad Poly Shyrene; and as a component in primer systems for hybrid and polyurethane sealants. 收起 | |
| SiSiB® PC1118 | SiSiB SILICONES | SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications inc...展开 SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine resins; a primer or additive in sealants and adhesives; mineral-filled polymers (composites) or HFFR cables; pretreatment of fillers and pigments; improvement of adhesion to the substrate in paints and coatings; improvement of flexural strength, tensile strength, impact strength and modulus of elasticity; or resistance to moisture and corrosion. 收起 | |
| SiSiB® PC1120 | SiSiB SILICONES | SiSiB® PC1120 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...展开 SiSiB® PC1120 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders; as a primer or additive and for the chemical modification of sealants and adhesives; as a pretreatment of fillers and pigments or as an additive in mineral-filled composites; synthesis of functional silicones; for improvements in adhesion, mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. 收起 | |
| SiSiB® PC1130 | SiSiB SILICONES | SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...展开 SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders in abrasives; as primer or additive and for chemical modification in sealants and adhesives; for pretreatment of fillers and pigments or as additive in mineral-filled composites; for synthesis of functional silicones; for improvements in adhesion or mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. 收起 | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or ...展开 SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. 收起 | |
| SiSiB® PC1220 | SiSiB SILICONES | SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to pr...展开 SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. 收起 | |
| SiSiB® PC1320 | SiSiB SILICONES | SiSiB® PC1320 is a clear to straw liquid with a slight amine-like odor that is soluble in alcohols, ketones, esters, and apliphatic and aromatic hydrocarbon solvents. It is an organofunctional silane possessing three reactive amino groups and hydrolyzabl...展开 SiSiB® PC1320 is a clear to straw liquid with a slight amine-like odor that is soluble in alcohols, ketones, esters, and apliphatic and aromatic hydrocarbon solvents. It is an organofunctional silane possessing three reactive amino groups and hydrolyzable methoxysilyl group. It can be used as an adhesion promoter in sealants, adhesives and coatings; as a surface modifier for fillers; or in the production of silyl-modified polymers which serve as binders in adhesives and sealants. 收起 | |
| SiSiB® PC1412 | SiSiB SILICONES | SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starti...展开 SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starting material in the synthesis of amino-functional silicones. 收起 | |
| SiSiB® PC1710 | SiSiB SILICONES | SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crossl...展开 SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crosslinking formulations, such as adhesive sealants, and coatings; or as a surface modifier for fillers (like glass, metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. 收起 | |
| SiSiB® PC1711 | SiSiB SILICONES | SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in ...展开 SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in silane-crosslinking formulations, such as adhesives, sealants, and coatings; or as a surface modifier for fillers (like glass metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. 收起 | |
| SiSiB® PC1951 | SiSiB SILICONES | SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inor...展开 SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inorganic trimethoxysilyl groups. It can be used as a primer or additive and for the chemical modification of sealants and adhesives; as a size constituent or finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins used in foundry resins; for pretreatment of fillers and pigments used in mineral-filled polymers; as a primer and additive to improve the adhesion of paints and coatings to the substrate; as an endcapper for polyurethanes; or as starting material in the synthesis of amino-functional silicones. 收起 | |
| SiSiB® PC2300 | SiSiB SILICONES | SiSiB® PC2300 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to impr...展开 SiSiB® PC2300 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. 收起 | |
| SiSiB® PC2310 | SiSiB SILICONES | SiSiB® PC2310 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improv...展开 SiSiB® PC2310 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. 收起 | |
| SiSiB® PC2320 | SiSiB SILICONES | SiSiB® PC2320 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improv...展开 SiSiB® PC2320 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. 收起 | |
| SiSiB® PC2510 | SiSiB SILICONES | SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant a...展开 SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant adhesion to oil metals; it can improve adhesion between the inorganic filler or fiber and the polymer; and can be used for glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders. 收起 | |
| SiSiB® PC2520 | SiSiB SILICONES | SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyuretha...展开 SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. 收起 | |
| SiSiB® PC2521 | SiSiB SILICONES | SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, ...展开 SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. 收起 | |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...展开 SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. 收起 | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...展开 SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. 收起 | |
| SiSiB® PC2780 | SiSiB SILICONES | SiSiB® PC2780 is a clear to straw liquid. It is a highly effective siloxane crosslinker. It can be used as an adhesion promoter and crosslinker in sealants and adhesives or coatings applications or to modify surfaces of inorganic materials, pigments or f...展开 SiSiB® PC2780 is a clear to straw liquid. It is a highly effective siloxane crosslinker. It can be used as an adhesion promoter and crosslinker in sealants and adhesives or coatings applications or to modify surfaces of inorganic materials, pigments or fillers (mica or mineral wool, glass, metal oxides etc.). 收起 | |
| SiSiB® PC3100 | SiSiB SILICONES | SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving siz...展开 SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. 收起 | |
| SiSiB® PC3200 | SiSiB SILICONES | SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...展开 SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. 收起 | |
| SiSiB® PC3300 | SiSiB SILICONES | SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...展开 SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. 收起 | |
| SiSiB® PC3400 | SiSiB SILICONES | SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...展开 SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. 收起 | |
| SiSiB® PC3500 | SiSiB SILICONES | SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...展开 SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. 收起 | |
| SiSiB® PC3510 | SiSiB SILICONES | SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...展开 SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. 收起 | |
| SiSiB® PC4100 | SiSiB SILICONES | SiSiB® PC4100 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and ...展开 SiSiB® PC4100 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; functionalize resins via radical initiated processes - copolymerization or grafting and to modify surfaces; improve strength as glass fiber size composite in reinforced polyester composites; enhance initial and wet strength of reinforced polyester resin composites; enhance the wet electrical properties of many mineral-filled and reinforced composites; and improve adhesion and durability of adhesives and coatings. 收起 | |
| SiSiB® PC4150 | SiSiB SILICONES | SiSiB® PC4150 is a colorless to straw transparent liquid. It is a methacryl functional silane, mainly used as a crosslinker for 100% acrylic latexes. It is especially useful in coatings applications where increased solvent and water resistance, mar resis...展开 SiSiB® PC4150 is a colorless to straw transparent liquid. It is a methacryl functional silane, mainly used as a crosslinker for 100% acrylic latexes. It is especially useful in coatings applications where increased solvent and water resistance, mar resistance, wet and dry adhesion, pigment binding and scrub resistance, films hardness and tensile strength. 收起 |
