UL Prospector

成功!

成功保存搜索结果
CR-50 Ishihara Sangyo Kaisha, Ltd. CR-50 is a rutile type titanium dioxide formed in a chloride process from TiO2 pigments that gives high gloss and whiteness. This product is a general grade for various applications such as water and solvent-based paints, printing inks and plastics. Howev...展开 CR-50 is a rutile type titanium dioxide formed in a chloride process from TiO2 pigments that gives high gloss and whiteness. This product is a general grade for various applications such as water and solvent-based paints, printing inks and plastics. However, yellowing can occur when this product is used in Pb-stabilized rigid polyvinyl chloride. 收起
CR-50-2 Ishihara Sangyo Kaisha, Ltd. CR-50-2 is a organic treated rutile type titanium dioxide formed in a chloride process. This product gives an ease of dispersion that is useful for various applications. It can be applied in water and solvent-based paints, printing inks and plastics.
CR-57 Ishihara Sangyo Kaisha, Ltd. CR-57 is a rutile type titanium dioxide formed in a chloride process that gives gloss, opacity, tinting strength, ease of dispersion and durability. This product can be applied to interior and exterior paints, powder coating and a variety of inks includin...展开 CR-57 is a rutile type titanium dioxide formed in a chloride process that gives gloss, opacity, tinting strength, ease of dispersion and durability. This product can be applied to interior and exterior paints, powder coating and a variety of inks including metal coating, gravure and flexographic. 收起
CR-58 Ishihara Sangyo Kaisha, Ltd. CR-58 is a rutile type titanium dioxide formed in a chloride process. This product is designed for metal coating inks when high opacity is required. It can also be applied to acryl/urethane and flat emulsion paints.
CR-58-2 Ishihara Sangyo Kaisha, Ltd. CR-58-2 is a rutile type titanium dioxide formed in a chloride process. This product contains strong hiding power. It is useful for metal coating inks.
CR-60-2 Ishihara Sangyo Kaisha, Ltd. CR-60-2 is a rutile type titanium dioxide formed in a chloride process that enables good whiteness, tinting strength, bluish tone, and contains an ease of dispersion. This product can be applied to gravure or high gloss inks.
CR-63 Ishihara Sangyo Kaisha, Ltd. CR-63 is a rutile type titanium dioxide formed in a chloride process that is specialized for applications where hydrolysis happens in its regin. This product can be applied to powder coatings.
CR-67 Ishihara Sangyo Kaisha, Ltd. CR-67 is a rutile type titanium dioxide formed in a chloride process that holds high gloss and a bluish color tone. This product is used for products that require high gloss such as surface-printing inks.
CR-80 Ishihara Sangyo Kaisha, Ltd. CR-80 is a rutile type titanium dioxide formed in a chloride process that contains strong durability in discoloration, anti-chalking and anti-yellowing. This product can be applied to industrial paints and gravure and flexographic inks
CR-90 Ishihara Sangyo Kaisha, Ltd. CR-90 is a rutile type titanium dioxide formed in a chloride process that contains strong durability in gloss retention and anti-chalking. This product is used in industrial paints, exterior paints, powder coatings and gravure and flexographic inks. It is...展开 CR-90 is a rutile type titanium dioxide formed in a chloride process that contains strong durability in gloss retention and anti-chalking. This product is used in industrial paints, exterior paints, powder coatings and gravure and flexographic inks. It is especially useful in applications where high durability are necessary. 收起
CR-90-2 Ishihara Sangyo Kaisha, Ltd. CR-90-2 is a rutile type titanium dioxide formed in a chloride process that gives durability in gloss retention and anti-chalking and ease of dispersion. This product can be applied to industrial and exterior paints, powder coatings and gravure and flexog...展开 CR-90-2 is a rutile type titanium dioxide formed in a chloride process that gives durability in gloss retention and anti-chalking and ease of dispersion. This product can be applied to industrial and exterior paints, powder coatings and gravure and flexographic inks. 收起
CR-93 Ishihara Sangyo Kaisha, Ltd. CR-93 is a rutile type titanium dioxide formed in a chloride process that gives durability in gloss retention, anti-chalking in addition to ease of dispersion. This product can be applied to automotive coatings, industrial and exterior paints and flexogra...展开 CR-93 is a rutile type titanium dioxide formed in a chloride process that gives durability in gloss retention, anti-chalking in addition to ease of dispersion. This product can be applied to automotive coatings, industrial and exterior paints and flexographic inks. 收起
CR-95 Ishihara Sangyo Kaisha, Ltd. CR-95 is a rutile type titanium dioxide formed in a chloride process that gives strong durability in gloss retention, chalk resistance and demonstrates ease of dispersion. This product is suitable for automotive coatings and industrial and exterior paints...展开 CR-95 is a rutile type titanium dioxide formed in a chloride process that gives strong durability in gloss retention, chalk resistance and demonstrates ease of dispersion. This product is suitable for automotive coatings and industrial and exterior paints. 收起
CR-953 Ishihara Sangyo Kaisha, Ltd. CR-953 is a rutile type titanium dioxide formed in a chloride process that gives strong durability in gloss retention, chalk resistance and demonstrates ease of dispersion. This product is suitable for automotive coatings and industrial and exterior paint...展开 CR-953 is a rutile type titanium dioxide formed in a chloride process that gives strong durability in gloss retention, chalk resistance and demonstrates ease of dispersion. This product is suitable for automotive coatings and industrial and exterior paints. 收起
CR-97 Ishihara Sangyo Kaisha, Ltd. CR-97 is a rutile type titanium dioxide formed in a chloride process that gives strong durability in gloss retention and anti-chalking. This product is suitable for automotive coatings and industrial and exterior paints.
CR-Super70 Ishihara Sangyo Kaisha, Ltd. CR-Super70 is a rutile type titanium dioxide formed in a chloride process that gives ease of dispersion, unique surface treatment and durability. This product can be applied to a variety of paints and printing inks in water-borne and solvent-borne paint s...展开 CR-Super70 is a rutile type titanium dioxide formed in a chloride process that gives ease of dispersion, unique surface treatment and durability. This product can be applied to a variety of paints and printing inks in water-borne and solvent-borne paint systems. 收起
Nipol® 1001 Zeon Corporation Nipol® 1001 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for hot polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041 Zeon Corporation Nipol® 1041 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041L Zeon Corporation Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. ...展开 Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. This product is a low Mooney version of N21 that provides good processability. 收起
Nipol® 1072 Zeon Corporation Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% ...展开 Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% bound acrylonitrile NBR. 收起
Nipol® 1562 Zeon Corporation Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsi...展开 Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsius. 收起
Nipol® 1571C2 Zeon Corporation Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius...展开 Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® 1571CL Zeon Corporation Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius...展开 Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius. 收起
Nipol® 1571H Zeon Corporation Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsiu...展开 Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsius. 收起
Nipol® DN101 Zeon Corporation Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...展开 Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. 收起
Nipol® DN101L Zeon Corporation Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...展开 Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. 收起
Nipol® LX110 Zeon Corporation Nipol® LX110 is a latex of a styrene-butadiene copolymer that can be used adhesives. This product's pH is 11.5 and it contains 40.5% solids. its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX112 Zeon Corporation Nipol® LX112 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 11.0 and it contains 40.5% solids. Its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX426 Zeon Corporation Nipol® LX426 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -39 degrees Celsius.
Nipol® LX430 Zeon Corporation Nipol® LX430 is a latex of a styrene-butadiene copolymer that can be used in wood adhesives. This product's pH is 7.0 and it contains 49% solids. Its average particle diameter is 150 nanometers and its glass transition temperature is 12 degrees Celsius.
Nipol® LX432M Zeon Corporation Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperatu...展开 Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperature is -55 degrees Celsius. 收起
Nipol® LX435 Zeon Corporation Nipol® LX435 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius.
Nipol® LX473D Zeon Corporation Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees C...展开 Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees Celsius. 收起
Nipol® LX511A Zeon Corporation Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Cels...展开 Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Celsius. 收起
Nipol® LX513 Zeon Corporation Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Cels...展开 Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Celsius. 收起
Nipol® LX517B Zeon Corporation Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Cels...展开 Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Celsius. 收起
Nipol® LX550 Zeon Corporation Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsi...展开 Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX550L Zeon Corporation Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Cels...展开 Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX551 Zeon Corporation Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsi...展开 Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. 收起
Nipol® LX552 Zeon Corporation Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsi...展开 Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsius. 收起
Nipol® LX811H Zeon Corporation Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 de...展开 Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 degree Celsius. 收起
Nipol® LX814 Zeon Corporation Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 deg...展开 Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 degrees Celsius. 收起
Nipol® LX816A Zeon Corporation Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition...展开 Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX820A Zeon Corporation Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temper...展开 Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temperature is -43 degrees Celsius. 收起
Nipol® LX851C Zeon Corporation Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It cont...展开 Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX851E Zeon Corporation Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contai...展开 Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.0. 收起
Nipol® LX851F2 Zeon Corporation Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contain...展开 Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 7.0. 收起
Nipol® LX852B Zeon Corporation Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains...展开 Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX854E Zeon Corporation Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature...展开 Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX874 Zeon Corporation Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% soli...展开 Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% solids and its pH is 6.5. 收起
PF-711 Ishihara Sangyo Kaisha, Ltd. PF-711 is a rutile type titanium dioxide formed in a chloride process that contains strong durability in both discoloration and anti-chalking in addition to ease of dispersion. This product can be applied to industrial paints.
PF-736 Ishihara Sangyo Kaisha, Ltd. PF-736 is a rutile type titanium dioxide formed in a sulfate process. This product provides high gloss and ease of dispersion. It is suitable for surface printing inks and gloss emulsion paints.
PF-742 Ishihara Sangyo Kaisha, Ltd. PF-742 is a rutile type titanium dioxide formed in a sulfate process that serves good printing properties and opacity specialized for laminate type gravure ink. This product exhibits high opacity especially after lamination in addition to good adhesivity ...展开 PF-742 is a rutile type titanium dioxide formed in a sulfate process that serves good printing properties and opacity specialized for laminate type gravure ink. This product exhibits high opacity especially after lamination in addition to good adhesivity and re-resolvability. 收起
Quintone® 1325 Zeon Corporation Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 460. 收起
Quintone® 1345 Zeon Corporation Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 140 degrees Celsius and its molecular weight is 500. 收起
Quintone® 1500 Zeon Corporation Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 ...展开 Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 degrees Celsius and its molecular weight is 420. 收起
Quintone® 1525L Zeon Corporation Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125...展开 Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 470. 收起
Quintone® A100 Zeon Corporation Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0....展开 Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® B170 Zeon Corporation Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium h...展开 Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® C200H (ZCT) Zeon Corporation Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Ce...展开 Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C200S Zeon Corporation Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it ...展开 Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C210 (ZCT) Zeon Corporation Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Cel...展开 Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® D100 Zeon Corporation Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degree...展开 Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® E200SN Zeon Corporation Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxi...展开 Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® G100B Zeon Corporation Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains l...展开 Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® G115 Zeon Corporation Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of pot...展开 Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® K100 Zeon Corporation Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassi...展开 Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® M100 Zeon Corporation Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® N180 Zeon Corporation Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of pota...展开 Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® N295 Zeon Corporation Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per...展开 Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per gram. 收起
Quintone® P195N Zeon Corporation Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Ce...展开 Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® R100 Zeon Corporation Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® S100 Zeon Corporation Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hyd...展开 Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® U185 Zeon Corporation Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degree...展开 Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® U190 Zeon Corporation Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of po...展开 Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
R-550 Ishihara Sangyo Kaisha, Ltd. R-550 is a rutile type titanium dioxide formed in a sulfate process. This product can be applied to various applications such as water and solvent-based paints and printing inks.
R-580 Ishihara Sangyo Kaisha, Ltd. R-580 is a rutile type titanium dioxide formed in a sulfate process that demonstrates strong opacity under high pigment content. This product is suitable for thinly-applied inks such as metal coatings and whiteout.
R-630 Ishihara Sangyo Kaisha, Ltd. R-630 is a rutile type titanium dioxide formed in a sulfate process used in water and solvent-based interior paints, gloss emulsion paints and surface printing inks where the high hiding power is required. It can also be applied to powder coatings and gra...展开 R-630 is a rutile type titanium dioxide formed in a sulfate process used in water and solvent-based interior paints, gloss emulsion paints and surface printing inks where the high hiding power is required. It can also be applied to powder coatings and gravure inks for high gloss. 收起
R-670 Ishihara Sangyo Kaisha, Ltd. R-670 is a rutile type titanium dioxide formed in a sulfate process. It contains high gloss and a bluish color tone. Thisproduct is appropriate for surface-printing inks where high gloss is necessary.
R-680 Ishihara Sangyo Kaisha, Ltd. R-680 is a rutile type titanium dioxide formed in a sulfate process. It can be used in water and solvent-based paints and printing inks.
R-780 Ishihara Sangyo Kaisha, Ltd. R-780 is a rutile type titanium dioxide formed in a sulfate process. It contains strong hiding power and color strength particularly under medium to high pigment content formulations. It can be used in flat emulsion paint and gravure ink.
R-780-2 Ishihara Sangyo Kaisha, Ltd. R-780-2 is a rutile type titanium dioxide formed in a sulfate process. It contains high opacity and pigment content. This product is suitable for flat emulsion paints.
R-820 Ishihara Sangyo Kaisha, Ltd. R-820 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc. This product can be used for a variety of applications including paints, exterior plastic coatings and printing i...展开 R-820 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc. This product can be used for a variety of applications including paints, exterior plastic coatings and printing inks. 收起
R-830 Ishihara Sangyo Kaisha, Ltd. R-830 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc in addition to hiding power, tinting strength and gloss. This product can be used for a variety of applications in...展开 R-830 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc in addition to hiding power, tinting strength and gloss. This product can be used for a variety of applications including interior/exterior paints, PVC-coatings and printing inks. 收起
R-930 Ishihara Sangyo Kaisha, Ltd. R-930 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc in addition to a narrowed particle size distribution that enables strong hiding power, tinting strength, high glos...展开 R-930 is a rutile type titanium dioxide formed in a sulfate process that contains strong durability from its crystal stabilization with zinc in addition to a narrowed particle size distribution that enables strong hiding power, tinting strength, high gloss. This product is used for gloss emulsion paints, durable industrial finishes and gravure and flexographic inks. 收起
R-980 Ishihara Sangyo Kaisha, Ltd. R-980 is a rutile type titanium dioxide formed in a sulfate process for various applications including exterior paints and rigid PVC-coatings where high durability are necessary. This product can also be used for interior applications and gravure inks for...展开 R-980 is a rutile type titanium dioxide formed in a sulfate process for various applications including exterior paints and rigid PVC-coatings where high durability are necessary. This product can also be used for interior applications and gravure inks for hiding power and gloss. 收起
S-305 Ishihara Sangyo Kaisha, Ltd. S-305 is a rutile type titanium dioxide formed in a chloride process. It contains high opacity making it suitable for flat emulsion paints and gravure and flexographic inks.
UT771 Ishihara Sangyo Kaisha, Ltd. UT771 is a rutile type titanium dioxide formed in a chloride process that holds strong durability and demonstrates dispersibility through applying organic compound to the surface in addition to serving gloss and color brightness through controlling partic...展开 UT771 is a rutile type titanium dioxide formed in a chloride process that holds strong durability and demonstrates dispersibility through applying organic compound to the surface in addition to serving gloss and color brightness through controlling particle size distribution and unique surface treatment. This product is suitable for water and solvent borne paint systems as well as powder coatings. 收起
GHS Compliance Services The Wercs Transition swiftly and seamlessly from your region's SDS to the Globally Harmonized (GHS) system for classification of chemicals. Our easy-to-use, webbased GHS Wizard makes it simple for your SDS author to ensure labels and data sheets support safe handli...展开 Transition swiftly and seamlessly from your region's SDS to the Globally Harmonized (GHS) system for classification of chemicals. Our easy-to-use, webbased GHS Wizard makes it simple for your SDS author to ensure labels and data sheets support safe handling and use of hazardous substances. 收起