| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...展开 Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. 收起 | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...展开 Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. 收起 | |
| Dynasylan® 9896 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9896 is an oligomeric short-chain alkylfunctional silane. It is soluble in common organic solvents. | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic ca...展开 Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. 收起 | |
| Dynasylan® F 8263 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8263 acts as an oleophobic agent to modify carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). | |
| Dynasylan® HMDS | Evonik Operations GmbH, BL Silanes | Dynasylan® HMDS is a hydrophobizing agent for surface modification. It can also be used to modify polymers. | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...展开 Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. 收起 | |
| Dynasylan® HYDROSIL 2775 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2775 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | 一种甲基丙酸烯官能硅烷，可用作粘胶促进剂、表面改性剂、高分子合成共聚单体，并可作为交联剂。 | |
| Dynasylan® MKS | Evonik Operations GmbH, BL Silanes | Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence o...展开 Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence of moisture. Dynasylan® MKS is a binder with superior anti-settling properties. Paints formulated with Dynasylan® MKS can easily be stirred-up even after longer storage times. After processing, the coating will cure in the presence of atmospheric moisture. Overcoating with conventional topcoat systems is facile. Zinc dust paints based on Dynasylan® MKS provide effective protection of steel against corrosion in aggressive industrial and coastal environments at elevated temperatures (up to 420 °C) in the presence of chemicals. 收起 | |
| Dynasylan® OCTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® OCTMO is commonly used as a hydrophobic surface modifier for fillers and pigments. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...展开 Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...展开 Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...展开 Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® Condensed | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder fo...展开 Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...展开 Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. 收起 | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...展开 Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. 收起 | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...展开 Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. 收起 | |
| Dynasylan® SILBOND® PURE | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol...展开 Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Dynasylan® SIVO 140 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations bas...展开 Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations based on Dynasylan® SIVO 140 cure at room temperature. 收起 | |
| Dynasylan® SIVO 160 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major b...展开 Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major breakthrough for water-borne sol-gel systems. 收起 | |
| Dynasylan® SIVO 214 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 214 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂、增粘剂和/或表面改性剂。 | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂, 增粘剂和/或表面改性剂。 | |
| NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C130是一种透明至微黄色液体，50%重量比，于环三羟甲基丙烷缩甲醛丙烯酸酯中的二氧化硅纳米颗粒。它可用于溶剂型和非溶剂型辐射固化配方中。它具有良好的柔韧性，可用于套印清漆和塑料面漆。该产品可增强耐划伤和耐磨性，而不减少透明度。它具有对铝/玻璃极好的附着力，降低固化收缩率和阻隔作用。它也对塑料有附着力，对填充剂配方有抗沉降效果和改进的污垢脱落性能 | Request Sample |
| NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C140是一种透明至微黄色液体，二氧化硅纳米颗粒50%重量比，混于己二醇二丙烯酸酯中。它具有良好的抗紫外线，高柔韧性，可用于溶剂型和无溶剂型辐射固化配方。它也适用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性，不会降低透明度。它对铝/玻璃具有良好的附着力，可降低固化收缩率，以及具有阻隔效果。它还改善了污垢脱落性。 | Request Sample |
| NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL®C 150是一种透明至微黄色液体，二氧化硅纳米颗粒50%重量比，混于三羟甲基丙烷（TMPTA）中。它可用于溶剂型和无溶剂型辐射固化配方。它具有高表面硬度和高交联密度，可用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性，不会降低透明度。它对铝/玻璃具有良好的附着力，可降低固化收缩率，以及具有阻隔效果。它还改善了污垢脱落性和对塑料的附着力。 | Request Sample |
| SILIKOFTAL® HTF MPA/MBA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin. | Request Sample |
| SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL 3/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | 用于生产耐热装饰涂料的溶剂型主体树脂。 | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | 用于耐热、抗腐蚀油漆的水性主体树脂。 | Request Sample |
| SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |
| SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...展开 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. 收起 | Request Sample |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | 硅改性的聚氨酯乳液，其特点为可产生水珠效果，用于皮革面漆手感滑，极高的柔韧性、良好的重涂性能、良好的自干性、高相容性和可用水稀释 | Request Sample |
| SILIKOTOP® E 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展开 SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SILIKOTOP® E 901 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展开 SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....展开 SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. 收起 | Request Sample |
| SPHERILEX® DP-0111 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0112 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0112 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0115 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0115 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| TEGO® AddBond 2325 | Evonik Operations GmbH, BL Coating Additives | 用于溶剂基配方的树脂，可增强与金属表面的附着力，改善防腐性并和多种原料，尤其是聚丙烯酸酯有非常好的配伍性。 | Request Sample |
| TEGO® AddBond DS 1300 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond DS 1300 improves adhesion of waterborne coatingson steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，增加了固体含量，改善了光泽度并提供广泛的可溶性和兼容性。这款产品推荐用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，防腐蚀，并提供光泽性。这款产品提供出色的铝、钢材、镀锌钢以及塑料、PVC和ABS表面的粘度。它鬼将用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | 改性聚二甲基硅氧烷树脂，用于生产溶剂型抗涂鸦涂料。 | Request Sample |
| TEGO® Therm HPG 4000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm HPG 6806 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® VariPlus 1201 TF | Evonik Operations GmbH, BL Coating Additives | 多羟基聚氨酯树脂，用于提高有机颜料的着色力，具有高耐光和耐热性 | Request Sample |
| TEGO® VariPlus AP | Evonik Operations GmbH, BL Coating Additives | 酮醛缩聚树脂，改善硬度、光泽并缩短干燥时间。 | Request Sample |
| TEGO® VariPlus CA | Evonik Operations GmbH, BL Coating Additives | 只是一种酮-醛缩合树脂，可以增加固体份，并加快干燥速度 | Request Sample |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | 这是一种聚氨酯多元醇树脂的阴离子乳液，可以增加颜料润湿和稳定性，并具有出色的耐水性 | Request Sample |
| TEGO® VariPlus SK | Evonik Operations GmbH, BL Coating Additives | 多羟基树脂，用于溶剂型配方，可提高在多种塑料和金属表面的附着力并降低配方的粘度 | Request Sample |
| TEGOMER® H-C 5002 | Evonik Operations GmbH, BL Coating Additives | TEGOMER® H-C 5002 is a low molecular hydroxy-functional polyacrylate. | Request Sample |
