99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
G21M-75 | Kito Chem | G21M-75 is a polyurethane curing accelerator made of an aromatic isocyanate that base on the floating toluene two different cyanic acid resin (TDI). 75% solid content ethyl acetate solution as the form of supply. It can be mixed with the hydroxy containin...展开 G21M-75 is a polyurethane curing accelerator made of an aromatic isocyanate that base on the floating toluene two different cyanic acid resin (TDI). 75% solid content ethyl acetate solution as the form of supply. It can be mixed with the hydroxy containing resin, to prepare the double component polyurethane coating and adhesive. 收起 | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
KEPER® Kesen-01 | Kito Chem | KEPER® Kesen-01 is an Osmanthus flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ...展开 KEPER® Kesen-01 is an Osmanthus flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-01W | Kito Chem | KEPER® Kesen-01W is an Osmanthus flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutra...展开 KEPER® Kesen-01W is an Osmanthus flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-02 | Kito Chem | KEPER® Kesen-02 is an Apple flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethe...展开 KEPER® Kesen-02 is an Apple flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-02W | Kito Chem | KEPER® Kesen-02W is an Apple flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral wa...展开 KEPER® Kesen-02W is an Apple flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-03 | Kito Chem | KEPER® Kesen-03 is an Lemon flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethe...展开 KEPER® Kesen-03 is an Lemon flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-03W | Kito Chem | KEPER® Kesen-03W is an Lemon flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral wa...展开 KEPER® Kesen-03W is an Lemon flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-04 | Kito Chem | KEPER® Kesen-04 is an Lavender flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, e...展开 KEPER® Kesen-04 is an Lavender flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-04W | Kito Chem | KEPER® Kesen-04W is an Lavender flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral...展开 KEPER® Kesen-04W is an Lavender flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-05 | Kito Chem | KEPER® Kesen-05 is an Rose flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ether...展开 KEPER® Kesen-05 is an Rose flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-05W | Kito Chem | KEPER® Kesen-05W is an Rose flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral wat...展开 KEPER® Kesen-05W is an Rose flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-06 | Kito Chem | KEPER® Kesen-06 is an Gardenia flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, e...展开 KEPER® Kesen-06 is an Gardenia flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-06W | Kito Chem | KEPER® Kesen-06W is an Gardenia flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral...展开 KEPER® Kesen-06W is an Gardenia flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-07 | Kito Chem | KEPER® Kesen-07 is an Forest flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, eth...展开 KEPER® Kesen-07 is an Forest flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-07W | Kito Chem | KEPER® Kesen-07W is an Forest flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral w...展开 KEPER® Kesen-07W is an Forest flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-08 | Kito Chem | KEPER® Kesen-08 is an Jasmine flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, et...展开 KEPER® Kesen-08 is an Jasmine flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in benzene, lipid, ketone, ethers, alcohol and so on. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER® Kesen-08W | Kito Chem | KEPER® Kesen-08W is an Jasmine flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral ...展开 KEPER® Kesen-08W is an Jasmine flavor additive made of a blend of condensed aromatic oil that synthetically imitate the fruit. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in both alkaline or neutral water-based emulsions. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER®-210 | Kito Chem | KEPER®-210 is a flash rust inhibitor additive made of an acidic sodium salt solution. It is a colorless transparent liquid that can impart flash rust resistance and extend the life of the iron substrate. It is nitrite-free and will not reduce the gloss or...展开 KEPER®-210 is a flash rust inhibitor additive made of an acidic sodium salt solution. It is a colorless transparent liquid that can impart flash rust resistance and extend the life of the iron substrate. It is nitrite-free and will not reduce the gloss or hardness of the film. This additive is well suited for use in the production of water-based paints and coatings. 收起 | |
KEPER®-231 | Kito Chem | KEPER®-231 is a type of bactericidal additive made of broad-spectrum ISoXTiazolinones bactericidal agent. It is a colorless to yellowish transparent liquid without any organic solvent or formaldehyde. And is primarily used to prevent the growth of bacteri...展开 KEPER®-231 is a type of bactericidal additive made of broad-spectrum ISoXTiazolinones bactericidal agent. It is a colorless to yellowish transparent liquid without any organic solvent or formaldehyde. And is primarily used to prevent the growth of bacteria, mold, Saccharomyces and protect the water-based products from the micro-organisms. This product is well suited for use in the production of water-base coatings, complex emulsions, emulsion varnishes and aqueous binders. 收起 | |
KEPER®-335 | Kito Chem | KEPER®-335 is a sanding agent of water-based paints made of a zinc stearate solution. It is a colorless to yellowish transparent liquid that can suspend particles with an appropriate flowing and thixotropy properties. In addition, it can also be used to i...展开 KEPER®-335 is a sanding agent of water-based paints made of a zinc stearate solution. It is a colorless to yellowish transparent liquid that can suspend particles with an appropriate flowing and thixotropy properties. In addition, it can also be used to improve drying speeds and dispersion with very little effect on the viscosity of most formulations. This additive is well suited for use in the production of water-based paints and especial for water-based wood paints. 收起 | |
KEPER®-482 | Kito Chem | KEPER®-483 is a UV extinction pulp made of a PTFE modified wax. It is a milk white transparent slurry that can add good slip and scratch resistance to most films and formulations. This additive is well suited for use in the production of high grade solven...展开 KEPER®-483 is a UV extinction pulp made of a PTFE modified wax. It is a milk white transparent slurry that can add good slip and scratch resistance to most films and formulations. This additive is well suited for use in the production of high grade solvents of matte type coatings, printing inks and UV coatings. 收起 | |
KEPER®-483 | Kito Chem | KEPER®-483 is a UV extinction pulp made of a PTFE modified wax. It is a milk white transparent slurry that can add good slip and scratch resistance to most films and formulations. This additive is well suited for use in the production of high grade solven...展开 KEPER®-483 is a UV extinction pulp made of a PTFE modified wax. It is a milk white transparent slurry that can add good slip and scratch resistance to most films and formulations. This additive is well suited for use in the production of high grade solvents of matte type coatings, printing inks and UV coatings. 收起 | |
KEPER®-524 | Kito Chem | KEPER®-524 is a conductive, anti-static agent made of a quaternary ammonium salt solution. It is a colorless to yellowish transparent liquid with good compatibility to all kinds of resins and will not affect the transparency of the films produced. This ad...展开 KEPER®-524 is a conductive, anti-static agent made of a quaternary ammonium salt solution. It is a colorless to yellowish transparent liquid with good compatibility to all kinds of resins and will not affect the transparency of the films produced. This additive is well suited for use in the production of anti-static or conductive solvent based inks and coatings. 收起 | |
KEPER®-528 | Kito Chem | KEPER®-528 is a conductive, anti-static agent made of a quaternary ammonium salt solution. It is a colorless to yellowish transparent liquid with good compatibility to all kinds of resins and will not affect the transparency of the films produced. This ad...展开 KEPER®-528 is a conductive, anti-static agent made of a quaternary ammonium salt solution. It is a colorless to yellowish transparent liquid with good compatibility to all kinds of resins and will not affect the transparency of the films produced. This additive is well suited for use in the production of anti-static or conductive solvent based inks and coatings. 收起 | |
KEPER®-541 | Kito Chem | KEPER®-541 is an anti-skinning agent made of an oxime solution. It is a colorless to yellowish transparent liquid that can impart antioxidant properties to most formulations while avoiding over oxidization of the polymerization process. It has very little...展开 KEPER®-541 is an anti-skinning agent made of an oxime solution. It is a colorless to yellowish transparent liquid that can impart antioxidant properties to most formulations while avoiding over oxidization of the polymerization process. It has very little effect on the viscosity and drying time of the coating. This additive is well suited for use in the production of oil-based coatings and printing inks. 收起 | |
KEPER®-550L | Kito Chem | KEPER®-550L is a corrosion inhibitor made from a butanol solution of phosphate titanate. It is a colorless to yellowish transparent liquid that can be used to impart water, salt and corrosion resistance to a wide range of formulations. In addition it can ...展开 KEPER®-550L is a corrosion inhibitor made from a butanol solution of phosphate titanate. It is a colorless to yellowish transparent liquid that can be used to impart water, salt and corrosion resistance to a wide range of formulations. In addition it can acid rain and anti-fouling resistance with no negative affect on the properties of the films produced. This additive is well suited for use in the production of exterior paints and coatings. 收起 | |
KEPER®-570 | Kito Chem | KEPER®-570 is a hammer finish additive made of a polysiloxane solution with high molecular weight. It is a colorless to yellowish transparent liquid with excellent stereoscopic impression on the film in most aluminum coatings. This additive is well suited...展开 KEPER®-570 is a hammer finish additive made of a polysiloxane solution with high molecular weight. It is a colorless to yellowish transparent liquid with excellent stereoscopic impression on the film in most aluminum coatings. This additive is well suited for use in the production of solvent type coatings, such as baking finishes, PU paints and alkyd paints. 收起 | |
KEPER®-ES101 | Kito Chem | KEPER®-ES101 is a apple flavor additive made of a blend of several essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paints and inks. This additive is well suited for use in the productio...展开 KEPER®-ES101 is a apple flavor additive made of a blend of several essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paints and inks. This additive is well suited for use in the production of oil or water-based inks and coatings. 收起 | |
KEPER®-ES201 | Kito Chem | KEPER®-ES201 is a Osmanthus flavor additive made of a blend of several essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paints and inks. This additive is well suited for use in the produ...展开 KEPER®-ES201 is a Osmanthus flavor additive made of a blend of several essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paints and inks. This additive is well suited for use in the production of oil or water-based inks and coatings. 收起 | |
KEPER®-OA1001 | Kito Chem | KEPER®-OA1001 is a mixed flavor additive made of a blend of spices and essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paint solvents. This additive is well suited for use in the produc...展开 KEPER®-OA1001 is a mixed flavor additive made of a blend of spices and essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paint solvents. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPER®-OA1002 | Kito Chem | KEPER®-OA1002 is a mixed flavor additive made of a blend of spices and essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paint solvents. This additive is well suited for use in the produc...展开 KEPER®-OA1002 is a mixed flavor additive made of a blend of spices and essences. It is a colorless to yellowish transparent liquid that can effectively mask the odor commonly found in most paint solvents. This additive is well suited for use in the production of solvent based inks and coatings. 收起 | |
KEPERCAT®-530 | Kito Chem | KEPERCAT®-530 is an organotin accelerator, curing agent made of a Tetravalent organotin compounds. It is a colorless to yellowish transparent liquid that can act as a catalyst in alkyl and isocyanate reactions, thus shortening the drying time of most form...展开 KEPERCAT®-530 is an organotin accelerator, curing agent made of a Tetravalent organotin compounds. It is a colorless to yellowish transparent liquid that can act as a catalyst in alkyl and isocyanate reactions, thus shortening the drying time of most formulations. This additive is well suited for use in the production of two part and moisture curing polyurethane coatings and flooring materials. 收起 | |
KEPERCAT®-532 | Kito Chem | KEPERCAT®-532 is an environmental metal salt accelerator, curing agent made of a dual organometailcs compound containing both zirconium and potassium. It is a colorless to yellowish transparent liquid that can lower the freezing point and extend the appli...展开 KEPERCAT®-532 is an environmental metal salt accelerator, curing agent made of a dual organometailcs compound containing both zirconium and potassium. It is a colorless to yellowish transparent liquid that can lower the freezing point and extend the applied deadline of the coating system. This additive is suited for use in the production of two component and moisture curing polyurethane coatings, polyurethane floor sheeting and waterproof materials. 收起 | |
KEPERCAT®-533 | Kito Chem | KEPERCAT®-533 is an efficient amine accelerator curing agent made of an organic amine. It is colorless to yellowish transparent liquid designed to improve the hardness and impact resistance as well as improve the curing speed of most formulations. This ad...展开 KEPERCAT®-533 is an efficient amine accelerator curing agent made of an organic amine. It is colorless to yellowish transparent liquid designed to improve the hardness and impact resistance as well as improve the curing speed of most formulations. This additive is well suited for use in the production of highly transparency PU primers and fast drying epoxy paints. 收起 | |
KEPERCAT®-538 | Kito Chem | KEPERCAT®-538 is an unsaturated polyester (UPE) efficient amine accelerator, curing agent made of an organic amine. It is a colorless to yellowish transparent liquid can improve the hardness, rubbing, and curing speeds of most formulations. This additive ...展开 KEPERCAT®-538 is an unsaturated polyester (UPE) efficient amine accelerator, curing agent made of an organic amine. It is a colorless to yellowish transparent liquid can improve the hardness, rubbing, and curing speeds of most formulations. This additive is well suited for use in the production of highly transparency PU primer and epoxy as well as fast drying epoxy paints. 收起 | |
KEPERCAT®-542 | Kito Chem | KEPERCAT®-542 is an acidic catalyst, curing accelerator made of a Non-occluded P-tsa acid catalyst. It is a colorless to yellowish transparent liquid that can effectively lower the curing temperature of most formulations. It is a strong acid type that can...展开 KEPERCAT®-542 is an acidic catalyst, curing accelerator made of a Non-occluded P-tsa acid catalyst. It is a colorless to yellowish transparent liquid that can effectively lower the curing temperature of most formulations. It is a strong acid type that can be used in solvent or water-based systems.This additive is well suited for use in the production amino paints (acid curing paints) and will cure in the air. 收起 | |
KEPERCAT®-543N | Kito Chem | KEPERCAT®-543N is an enclosed type amine salt of p-tsa catalyst, used as a cooling agent for paints. It has a low deblocking temperature and high catalytic efficiency. It is a colorless to yellowish transparent liquid formulated to improve the hardness an...展开 KEPERCAT®-543N is an enclosed type amine salt of p-tsa catalyst, used as a cooling agent for paints. It has a low deblocking temperature and high catalytic efficiency. It is a colorless to yellowish transparent liquid formulated to improve the hardness and processability of film under higher than normal temperatures without affecting the film appearance. It is suitable for use in solvent and water-based systems and especially in coil coating systems. 收起 | |
KEPERCAT®-544N | Kito Chem | KEPERCAT®-544N is an acidic catalyst, curing accelerator made of an enclosed type amine salt of p-tsa. It is a colorless to yellowish transparent liquid that can effectively lower the deblocking temperature of most formulations. It is a strong acid type ...展开 KEPERCAT®-544N is an acidic catalyst, curing accelerator made of an enclosed type amine salt of p-tsa. It is a colorless to yellowish transparent liquid that can effectively lower the deblocking temperature of most formulations. It is a strong acid type that can be used in solvent or water-based systems.This additive is well suited for use in the production solvent and water-based coatings, especially coil coatings. 收起 | |
KEPERCAT®-546 | Kito Chem | KEPERCAT®-546 is an acidic catalyst, curing accelerator made of an enclosed type amine salt of DNNSA. It is a brown transparent liquid that can effectively lower the curing temperature of most formulations. It is a strong acid type that can be used in so...展开 KEPERCAT®-546 is an acidic catalyst, curing accelerator made of an enclosed type amine salt of DNNSA. It is a brown transparent liquid that can effectively lower the curing temperature of most formulations. It is a strong acid type that can be used in solvent or water-based systems.This additive is well suited for use in the production amino paints (acid curing paints) and will cure in the air. 收起 | |
KEPERCAT®-548 | Kito Chem | KEPERCAT®-548 is an acidic catalyst, curing accelerator made of a non-enclosed polycarboxylate carboxylic acid solution. It is a colorless to yellowish transparent liquid with good compatibility, low catalytic efficiency in normal temperature and does not...展开 KEPERCAT®-548 is an acidic catalyst, curing accelerator made of a non-enclosed polycarboxylate carboxylic acid solution. It is a colorless to yellowish transparent liquid with good compatibility, low catalytic efficiency in normal temperature and does not have an effect on the storage stability. It can improve the hardness and process-ability of the film under a temperature that higher than optimum temperature, thus reducing the curing time. This additive is well suited for use in the production paints and coatings. 收起 | |
KEPERCAT®-549 | Kito Chem | KEPERCAT®-549 is an acidic catalyst, curing accelerator made of a phosphate solution. It is a colorless to yellowish transparent liquid with good compatibility, low catalytic efficiency in normal temperature and does not have an effect on the storage stab...展开 KEPERCAT®-549 is an acidic catalyst, curing accelerator made of a phosphate solution. It is a colorless to yellowish transparent liquid with good compatibility, low catalytic efficiency in normal temperature and does not have an effect on the storage stability. It can improve the hardness and processability of the film under a temperature that higher than optimum temperature, thus reducing the curing time. This additive is well suited for use in the production paints and coatings. 收起 | |
KEPERDISP®-6090 | Kito Chem | KEPERDISP®-6090 is an acrylate copolymer with pigment affinity groups for use in water based systems and pigment concentrate dispersant. It comes as a colorless to light yellow transparent liquid that is compatible in a wide range of water based pigment c...展开 KEPERDISP®-6090 is an acrylate copolymer with pigment affinity groups for use in water based systems and pigment concentrate dispersant. It comes as a colorless to light yellow transparent liquid that is compatible in a wide range of water based pigment concentrates with or without resin. It is well suited for use in the dispersant of organic, inorganic pigments and carbon black in water born coating formulations. 收起 | |
KEPERDISP®-6091 | Kito Chem | KEPERDISP®-6091 is an acrylate copolymer with pigment affinity groups for use in water based systems and pigment concentrate dispersant. It comes as a colorless to light yellow transparent liquid that is compatible in a wide range of water based pigment c...展开 KEPERDISP®-6091 is an acrylate copolymer with pigment affinity groups for use in water based systems and pigment concentrate dispersant. It comes as a colorless to light yellow transparent liquid that is compatible in a wide range of water based pigment concentrates with or without resin. It is well suited for use in the dispersant of organic, inorganic pigments and carbon black in water born coating formulations. 收起 | |
KEPERDISP®-620 | Kito Chem | KEPERDISP®-620 is a general hyperdispersant for water and oil based systems made of a block copolymer solution. It is a light yellow transparent liquid with excellent dispersity and viscosity reducing effects. It can be used to reduce the dosage of the di...展开 KEPERDISP®-620 is a general hyperdispersant for water and oil based systems made of a block copolymer solution. It is a light yellow transparent liquid with excellent dispersity and viscosity reducing effects. It can be used to reduce the dosage of the dispersing agent as well as improve the efficiency of grinding. This product is well suited for the production of solvent based coatings and inks. 收起 | |
KEPERPOL®-100 | Kito Chem | KEPERPOL®-100 is a bubble type silicone defoaming agent made of a modified polysiloxane solution. it is a colorless to yellowish transparent liquid with good compatibility with all kinds of resin, does not effect to the clarity. This additive is well suit...展开 KEPERPOL®-100 is a bubble type silicone defoaming agent made of a modified polysiloxane solution. it is a colorless to yellowish transparent liquid with good compatibility with all kinds of resin, does not effect to the clarity. This additive is well suited for use in the production of finishing paints and varnish where high gloss is a concern. 收起 | |
KEPERPOL®-3134W | Kito Chem | KEPERPOL®-3134W is a water-based defoaming agent made of a mineral oil polymide solution. It is a milk white liquid that can be added in small dosages under low shear force and dose not have a lasting effect. This additive is well suited for use in the pr...展开 KEPERPOL®-3134W is a water-based defoaming agent made of a mineral oil polymide solution. It is a milk white liquid that can be added in small dosages under low shear force and dose not have a lasting effect. This additive is well suited for use in the production of water-based color coatings, and will not affect the gloss or color phase. 收起 | |
KEPERPOL®-3202W | Kito Chem | KEPERPOL®-3202Wis a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microb...展开 KEPERPOL®-3202Wis a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of inks and coatings using water-based or alcohol as a solvent. 收起 | |
KEPERPOL®-3203W | Kito Chem | KEPERPOL®-3203W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a mlik white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of pain...展开 KEPERPOL®-3203W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a mlik white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of paints, coatings and printing inks. 收起 | |
KEPERPOL®-3204W | Kito Chem | KEPERPOL®-3204W is a water-based silicone emulsion defoaming agent made of a polysiloxane emulsion. It is a translucent hoary liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the production of varnis...展开 KEPERPOL®-3204W is a water-based silicone emulsion defoaming agent made of a polysiloxane emulsion. It is a translucent hoary liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the production of varnishes, dope dying and paper pulp production wherever defoaming is needed in the system. 收起 | |
KEPERPOL®-3225W | Kito Chem | KEPERPOL®-3225W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the micro...展开 KEPERPOL®-3225W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of varnishes, inks and coatings using water-based or alcohol as a solvent. 收起 | |
KEPERPOL®-3301W | Kito Chem | KEPERPOL®-3301W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the micro...展开 KEPERPOL®-3301W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of varnishes, inks and coatings using water-based or alcohol as a solvent. 收起 | |
KEPERPOL®-3309W | Kito Chem | KEPERPOL®-3309W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a milk white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of wate...展开 KEPERPOL®-3309W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a milk white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of water-based paint and varnish, and the relief block, gravure system. 收起 | |
KEPERPOL®-3310W | Kito Chem | KEPERPOL®-3310W is a water-based system silicone defoaming agent. Made of a self-emulsifying polyether siloxane emulsions with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is emulsifier free with good moment def...展开 KEPERPOL®-3310W is a water-based system silicone defoaming agent. Made of a self-emulsifying polyether siloxane emulsions with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is emulsifier free with good moment defoaming and sustained defoaming performance. And is well suited for the production of inks and coatings using water-based or alcohol as a solvent. 收起 | |
KEPERPOL®-3319W | Kito Chem | KEPERPOL®-3319W is a water-based system silicone defoaming agent. Made of polyether siloxane concentrate, it comes as a milk white liquid which can be added to dipropylene glycol monomethyl ether based solvents. It is well suitable for used in the abrasiv...展开 KEPERPOL®-3319W is a water-based system silicone defoaming agent. Made of polyether siloxane concentrate, it comes as a milk white liquid which can be added to dipropylene glycol monomethyl ether based solvents. It is well suitable for used in the abrasive industry with very a good foam inhibition property. And is generally used for the high-gloss and semigloss defoaming systems for paints and Inks. 收起 | |
KEPERPOL®-3362W | Kito Chem | KEPERPOL®-3362W is a water-based defoaming agent made with a concentrated mixture of slioxane copolymers and Si02. It is a slightly turbid liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the product...展开 KEPERPOL®-3362W is a water-based defoaming agent made with a concentrated mixture of slioxane copolymers and Si02. It is a slightly turbid liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the production of paints, coatings and printing inks. 收起 | |
KEPERPOL®-367 | Kito Chem | KEPERPOL®-367 is a water-based defoaming agent made of a mineral oil polymide solution. It is a mlik white liquid that can be added in small dosages under low shear force and dose not have a lasting effect. This additive is well suited for use in the prod...展开 KEPERPOL®-367 is a water-based defoaming agent made of a mineral oil polymide solution. It is a mlik white liquid that can be added in small dosages under low shear force and dose not have a lasting effect. This additive is well suited for use in the production of water-based color coatings, and will not affect the gloss or color phase. 收起 | |
KEPERPOL®-702 | Kito Chem | KEPERPOL®-702 is a silicone defoaming agent made of a fluorinated polysiloxane solution. It is a colorless liquid with good compatibility in most formulations, reducing the pinholes and cratering problem on the film. This additive is well suited for use i...展开 KEPERPOL®-702 is a silicone defoaming agent made of a fluorinated polysiloxane solution. It is a colorless liquid with good compatibility in most formulations, reducing the pinholes and cratering problem on the film. This additive is well suited for use in the production of varnishes, gloss paints and transparent epoxy pouring sealant formulas. 收起 | |
KEPERPOL®-703 | Kito Chem | KEPERPOL®-703 is a silicone defoaming agent made of a modified plysiloxane solution. it is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in th...展开 KEPERPOL®-703 is a silicone defoaming agent made of a modified plysiloxane solution. it is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in the production of in high gloss finishing paints, varnishes, and printing inks. 收起 | |
KEPERPOL®-708 | Kito Chem | KEPERPOL®-708 is a silicone defoaming agent made of a modified polysiloxane solution. It is a colorless to yellowish transparent liquid that can be used in high viscosity primer coating systems (epoxy primer, PU primer, NC primer) in large dosages.This ad...展开 KEPERPOL®-708 is a silicone defoaming agent made of a modified polysiloxane solution. It is a colorless to yellowish transparent liquid that can be used in high viscosity primer coating systems (epoxy primer, PU primer, NC primer) in large dosages.This additive is well suited for use in the production of solvent based coatings, color paints, and primers where viscosity is key. 收起 | |
KEPERPOL®-712 | Kito Chem | KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展开 KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-713 | Kito Chem | KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展开 KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-717 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...展开 KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起 | |
KEPERPOL®-718 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...展开 KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起 | |
KEPERPOL®-720 | Kito Chem | KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming...展开 KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起 | |
KEPERPOL®-730 | Kito Chem | KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展开 KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-730B | Kito Chem | KEPERPOL®-730B is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the d...展开 KEPERPOL®-730B is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-7315 | Kito Chem | KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps ...展开 KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-732 | Kito Chem | KEPERPOL®-732 is a non-silicon defoaming agent made of a mixture of an acrylic copolymer solution. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展开 KEPERPOL®-732 is a non-silicon defoaming agent made of a mixture of an acrylic copolymer solution. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-733 | Kito Chem | KEPERPOL®-733 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps t...展开 KEPERPOL®-733 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起 | |
KEPERPOL®-741 | Kito Chem | KEPERPOL®-741 is a high compatibility silicone defoaming agent made of a fluorocarbon modified polysilixoane solution. It is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This add...展开 KEPERPOL®-741 is a high compatibility silicone defoaming agent made of a fluorocarbon modified polysilixoane solution. It is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in the production of in high gloss finishing paints, varnishes, and printing inks. 收起 | |
KEPERPOL®-743 | Kito Chem | KEPERPOL®-743 is a silicone defoamer which contains foam destroying polymers for solvent-based coatings. Made of polysiloxanes and foam destroying polymers, it comes as a colorless to light yellow transparent liquid.Particularly suitable for breaking the ...展开 KEPERPOL®-743 is a silicone defoamer which contains foam destroying polymers for solvent-based coatings. Made of polysiloxanes and foam destroying polymers, it comes as a colorless to light yellow transparent liquid.Particularly suitable for breaking the microbubbles in roller painting of epoxy systems. It can be used in the production of inks and coatings using a hydrocarbon based solvent. 收起 | |
KEPERPOL®-750 | Kito Chem | KEPERPOL®-750 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent su...展开 KEPERPOL®-750 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent suds suppressing properties and deaerated. It can be used in the production of varnishes, inks and coatings using a xylol based solvent. 收起 | |
KEPERPOL®-752 | Kito Chem | KEPERPOL®-752 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent su...展开 KEPERPOL®-752 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent suds suppressing properties and deaerated. It can be used in the production of varnishes, inks and coatings using aliphatic hydrocarbon solvent. 收起 | |
KEPERPOL®-755 | Kito Chem | KEPERPOL®-755 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent su...展开 KEPERPOL®-755 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent suds suppressing properties and deaerated. It can be used in the production of inks and coatings using aliphatic hydrocarbon solvent. 收起 | |
KEPERPOL®-756 | Kito Chem | KEPERPOL®-756 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent su...展开 KEPERPOL®-756 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent suds suppressing properties and deaerated. It can be used in the production of inks and coatings using aliphatic hydrocarbon solvent. 收起 | |
KEPERPOL®-760 | Kito Chem | KEPERPOL®-760 is a solvent type and water-based system defoaming agent made of a modified polysiloxane solution. It is a yellowish translucent liquid that has good compatibly with both water and organic solvent systems. It is suitable to be used in preven...展开 KEPERPOL®-760 is a solvent type and water-based system defoaming agent made of a modified polysiloxane solution. It is a yellowish translucent liquid that has good compatibly with both water and organic solvent systems. It is suitable to be used in preventing bubble formation in non-polarity to polarity coatings. Especially suitable for defoaming in the non-solvent system. 收起 | |
KEPERPOL®-761 | Kito Chem | KEPERPOL®-761 is a silicone leveling and defoaming agent made of a methyl-alkyl polysiloxane solution. It is a clear and colorless liquid that can reduce the surface tension and promote leveling in most systems. It is suitable for use in preventing bubble...展开 KEPERPOL®-761 is a silicone leveling and defoaming agent made of a methyl-alkyl polysiloxane solution. It is a clear and colorless liquid that can reduce the surface tension and promote leveling in most systems. It is suitable for use in preventing bubble formation in non-polarity to polarity coatings. especially suitable for defoaming in the non-solvent systems. 收起 | |
KEPERPOL®-762 | Kito Chem | KEPERPOL®-762 is a solvent type and water-based system defoaming agent made of a modified polysiloxane solution. It is a yellowish translucent liquid that has good compatibly with both water and organic solvent systems. It is suitable to be used in preven...展开 KEPERPOL®-762 is a solvent type and water-based system defoaming agent made of a modified polysiloxane solution. It is a yellowish translucent liquid that has good compatibly with both water and organic solvent systems. It is suitable to be used in preventing bubble formation in non-polarity to polarity coatings. Especially suitable for defoaming in the non-solvent system. 收起 | |
KEPERPOL®-766 | Kito Chem | KEPERPOL®-766 is a solvent-based defoaming agent made of a polysiloxane solution containing foam breaking particles. It is a slightly cloudy liquid with good foam inhibition and breaking performance in high solid and non solvent systems. It can also be us...展开 KEPERPOL®-766 is a solvent-based defoaming agent made of a polysiloxane solution containing foam breaking particles. It is a slightly cloudy liquid with good foam inhibition and breaking performance in high solid and non solvent systems. It can also be used in some of the more difficult defomaing processes, such as in a stiff epoxy systems. This additive is well suited for use in the production of solvent-based and UV paints, coatings, epoxies and silk printing inks and anywhere high solid content is a concern. 收起 | |
KEPERPOL®-768 | Kito Chem | KEPERPOL®-768 is a viscosity system silicone defoaming agent, made of a polysiloxane solution with hydrophobic particles. It is a milk white translucent liquid can impart good foam inhibition in some of the more difficult defoaming formulations. This addi...展开 KEPERPOL®-768 is a viscosity system silicone defoaming agent, made of a polysiloxane solution with hydrophobic particles. It is a milk white translucent liquid can impart good foam inhibition in some of the more difficult defoaming formulations. This additive is well suited for use in the production of epoxy floor paints and silk printing inks used in both high solid and non-solvent systems. 收起 | |
KEPERPOL®-801 | Kito Chem | KEPERPOL®-801 is a defoaming agent made of a fluorocarbon modified polysiloxane solution. It is a colorless transparent liquid with good compatibility and significant defoaming performance in PU thick films. This additive is well suited for use in the pro...展开 KEPERPOL®-801 is a defoaming agent made of a fluorocarbon modified polysiloxane solution. It is a colorless transparent liquid with good compatibility and significant defoaming performance in PU thick films. This additive is well suited for use in the production of coatings, printing inks, and finishing varnishes. 收起 | |
KEPERPOL®-809 | Kito Chem | KEPERPOL®-809 is a super silicone anti-foaming agent made of a fluorine carbon modified polysiloxane solution. It is a colorless to light yellow transparent liquid can be used in a wide range of systems including high viscosity systems such as epoxy syste...展开 KEPERPOL®-809 is a super silicone anti-foaming agent made of a fluorine carbon modified polysiloxane solution. It is a colorless to light yellow transparent liquid can be used in a wide range of systems including high viscosity systems such as epoxy systems. This additive is well suited for use in the production of solvent free coatings, inks, epoxy potting glue, epoxy floor paints etc. 收起 | |
KEPERPOL®-810 | Kito Chem | KEPERPOL®-810 is a high-efficiency defoaming agent made of a fluorocarbon modified polysiloxane solution. It is a colorless to yellowish transparent liquid that has good defoaming performance in viscous systems such as epoxy systems and most solvent type ...展开 KEPERPOL®-810 is a high-efficiency defoaming agent made of a fluorocarbon modified polysiloxane solution. It is a colorless to yellowish transparent liquid that has good defoaming performance in viscous systems such as epoxy systems and most solvent type coating systems. This additive is well suited for use in the defoaming of brush, flame, roller plating application. 收起 | |
KEPERPOL®-811 | Kito Chem | KEPERPOL®-811 is a Fluorosilicone efficient defoaming agent. Made from fluorocarbon-modified silicone, it comes as a colorless to light yellow liquid which can be added to most solvent based systems. It is an effective defoamer of high concentration, suit...展开 KEPERPOL®-811 is a Fluorosilicone efficient defoaming agent. Made from fluorocarbon-modified silicone, it comes as a colorless to light yellow liquid which can be added to most solvent based systems. It is an effective defoamer of high concentration, suitable for coating, inks, lubricants, anti-foaming airless spray and other difficult situations. It can be diluted with ketones based solvents to improve even dispersement under high sheer and in order to avoid cratering. 收起 | |
KEPERPOL®-Re-711 | Kito Chem | KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoam...展开 KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起 | |
KEPERRHE®-400 | Kito Chem | KEPERRHE®-400 is an anti-setting and anti-sagging agent made of a polyamide wax. It is a white to yellowish powder that can dissolve in some hydrocarbon under higher temperatures. It can improve the consistence rapidly when apply to the heavy-duty anti-co...展开 KEPERRHE®-400 is an anti-setting and anti-sagging agent made of a polyamide wax. It is a white to yellowish powder that can dissolve in some hydrocarbon under higher temperatures. It can improve the consistence rapidly when apply to the heavy-duty anti-corrosive coatings. And achieve anti-sagging even in the extremely impasto. It is suitable for use in the production of solvent type wood paint, industry paint, heavy-duty anti-corrosive coatings. 收起 | |
KEPERRHE®-401P | Kito Chem | KEPERRHE®-401P is an anti-setting and color spread agent made of a decomposition polyethylene wax in advance. It is a milk white translucence pulpous fluid offering an excellent anti-setting property but does not effect on the coating viscosity. It can of...展开 KEPERRHE®-401P is an anti-setting and color spread agent made of a decomposition polyethylene wax in advance. It is a milk white translucence pulpous fluid offering an excellent anti-setting property but does not effect on the coating viscosity. It can offer good orientation arrangement properties to aluminite powder, pearl powder, improving the metallic effect. Without any effect on the gloss, yellowing resistance, waterproof and drying time of the film. 收起 | |
KEPERRHE®-409 | Kito Chem | KEPERRHE®-409 is an anti-setting and anti-sagging rheological agent made of a polyamide wax solution. It is a yellowish paste that can dissolve in some hydrocarbon under higher temperatures. It is a well active gel that can be added directly to most syste...展开 KEPERRHE®-409 is an anti-setting and anti-sagging rheological agent made of a polyamide wax solution. It is a yellowish paste that can dissolve in some hydrocarbon under higher temperatures. It is a well active gel that can be added directly to most systems. It is suited for use in a variety of applications, especially for anti-sagging in heavy-duty anti-corrosive coatings. 收起 | |
KEPERRHE®-421 | Kito Chem | KEPERRHE®-421 is a liquid rheological agent made of a polymer contained amine and acid groups solution. It is a yellowish transparent liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent syst...展开 KEPERRHE®-421 is a liquid rheological agent made of a polymer contained amine and acid groups solution. It is a yellowish transparent liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive is suitable to be used in varnish, pigment coating and metallic finishing paint. 收起 | |
KEPERRHE®-422 | Kito Chem | KEPERRHE®-422 is a liquid rheological agent made of a high polymer modified polyurea solution. It is a yellowish viscous liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This add...展开 KEPERRHE®-422 is a liquid rheological agent made of a high polymer modified polyurea solution. It is a yellowish viscous liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive is suitable to be used in varnish, pigment coating and metallic flashing paint. 收起 | |
KEPERRHE®-430 | Kito Chem | KEPERRHE®-430 is a modified polyurea rheological additive for water based coating systems. It can improve the viscosity of water-based paint, provide thixotropic, anti-setting and anti-sagging performance of most products. It is APEO free and contains low...展开 KEPERRHE®-430 is a modified polyurea rheological additive for water based coating systems. It can improve the viscosity of water-based paint, provide thixotropic, anti-setting and anti-sagging performance of most products. It is APEO free and contains low viscosity pigment concentrates that lend to its improved liquidity. 收起 | |
KEPERRHE®-448 | Kito Chem | KEPERRHE®-448 is a sheet pigment arrangement rheological agent made of EVA and EEA coploymer wax. It is a milk white translucence pulpous fluid that is suitable to be used anti-setting of the solvent type primer, special for the sheet metallic finish pigm...展开 KEPERRHE®-448 is a sheet pigment arrangement rheological agent made of EVA and EEA coploymer wax. It is a milk white translucence pulpous fluid that is suitable to be used anti-setting of the solvent type primer, special for the sheet metallic finish pigment. It can be used to greatly improve the orientation of the metallic sheet pigment, and increase the optically variable ability. 收起 | |
KEPERRHE®-HA4220 | Kito Chem | KEPERRHE®-HA4220 is an associative alkali-soluble rheological agent made of an anion HASE type solution. It is a milk white liquid with excellent thickening performance and low viscosity after opened. In addition, it can impart heat stability, anti microb...展开 KEPERRHE®-HA4220 is an associative alkali-soluble rheological agent made of an anion HASE type solution. It is a milk white liquid with excellent thickening performance and low viscosity after opened. In addition, it can impart heat stability, anti microbial and enzymatic decomposition to most formulations. This additive is well suited for use in the production of latex paints and other water-based coatings. 收起 |