| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| AddWorks® LXR™ 308 AP | Clariant Plastics & Coatings Ltd. | AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons. | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Ceridust® 1060 TP | Clariant Plastics & Coatings Ltd. | Ceridust® 1060 TP is a micronized polar modified wax based on renewable resource. | |
| Ceridust® 2051 | Clariant Plastics & Coatings Ltd. | Ceridust® 2051 is a micronized synthetic wax. | |
| Ceridust® 3251 | Clariant Plastics & Coatings Ltd. | Ceridust® 3251 is a micronized, modified polyethylene wax. | |
| Ceridust® 3610 | Clariant Plastics & Coatings Ltd. | Ceridust® 3610 is a micronized high density polyethylene wax. | |
| Ceridust® 3620 | Clariant Plastics & Coatings Ltd. | Ceridust® 3620 is a micronized polyethylene wax. | |
| Ceridust® 3715 | Clariant Plastics & Coatings Ltd. | Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 3920 F | Clariant Plastics & Coatings Ltd. | Ceridust® 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax. | |
| Ceridust® 5551 | Clariant Plastics & Coatings Ltd. | Ceridust® 5551 is a micronized, partly saponified ester of montanic acids. | |
| Ceridust® 6721 | Clariant Plastics & Coatings Ltd. | Ceridust® 6721 is a micronized, amide modified polypropylene wax. | |
| Ceridust® 8020 | Clariant Plastics & Coatings Ltd. | Ceridust® 8020 is a micronized, highly modified copolymer wax. | |
| Ceridust® 9202 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9202 F is a micronized polytetrafluoroethylene. | |
| Ceridust® 9205 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9205 F is a micronized polytetrafluorethylene. | |
| Ceridust® 9615 A | Clariant Plastics & Coatings Ltd. | Ceridust® 9615 A is a micronized blend of polyethylene and amide wax. | |
| Ceridust® 9630 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9630 F is a polytetrafluoroethylene modified polyethylene wax. | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Densil® ZOD | Arxada – Troy Corporation | Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-solubl...展开 Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-soluble fungicide. Densil® ZOD also contains a supplemental algaecide for complete dry-film protection of the coating. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...展开 Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...展开 Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...展开 Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...展开 Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....展开 Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. 收起 | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...展开 Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. 收起 | |
| Fungitrol® 11E | Arxada – Troy Corporation | Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne ...展开 Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne exterior paints and stains. 收起 | |
| Fungitrol™ 400G | Arxada – Troy Corporation | Fungitrol ™ 400G是100％活性IPBC，是自由流动的颗粒形式。它是一种高效的广谱杀菌剂。此产品已于各种应用中广泛使用了很多年，可防止由真菌，霉菌和霉菌引起的损毁和变质。 | |
| Fungitrol® 404-DS | Arxada – Troy Corporation | Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds,...展开 Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds, and wood preservative stains. 收起 | |
| Fungitrol® 720 | Arxada – Troy Corporation | Fungitrol® 720 is a fungicide that offers broad-spectrum protection against degradation, discoloration, and defacement caused by mold, mildew, and algae. | |
| Fungitrol™ DP2 | Arxada – Troy Corporation | Fungitrol™ DP2 is a unique wet-state and dry-film preservative in one product. Fungitrol™ DP2 is a highly effective growth inhibitor of fungal and bacterial organisms providing long-term protection of paints in the wet state and the coated surfaces. | |
| Hordaphos® 124 | Clariant Plastics & Coatings Ltd. | Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic ...展开 Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. 收起 | |
| Hordaphos® 222 | Clariant Plastics & Coatings Ltd. | Hordaphos® 222 is a clear, colourless to yellowish liquid with an ester-like odour. It has reacts acidic and can be neutralized with organic and inorganic bases. Hordaphos® 222 is emulsifiable in water and soluble in common organic solvents. | |
| Hordaphos® MDAH | Clariant Plastics & Coatings Ltd. | Hordaphos® MDAH is a clear, colourless to yellowish liquid with an ester-like odour that may darken during storage. The product is soluble in organic solvents. When the ester is neutralized, it is emulsifiable in water. | |
| Hordaphos® MDB | Clariant Plastics & Coatings Ltd. | Hordaphos® MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hordaphos® MOB | Clariant Plastics & Coatings Ltd. | Hordaphos® MOB is a multi-functional additive for various applications, especially for printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hostaphat® TBEP HQ | Clariant Plastics & Coatings Ltd. | Hostaphat® TBEP HQ is a phosphate ester used as plasticizer for polymer dispersions. | |
| Hostavin® 3051 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3051 is a low molecular weight hindered amine light stabilizer (HALS), characterized by its low volatility and good migration properties and enhanced Tribo effect for powder coating. | |
| Hostavin® 3051-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. | |
| Hostavin® 3053 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3055 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3058 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency...展开 Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. 收起 | |
| Hostavin® 3065 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. | |
| Hostavin® 3070 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration ...展开 Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for plastic coatings and architectural façade coatings. Hostavin® 3070 DISP has been awarded with an EcoTain® label resulting from its excellent toxicological profile. 收起 | |
| Hostavin® 3070 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique...展开 Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique solubility in solvent-borne coatings. 收起 | |
| Hostavin® 3206 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterised by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as...展开 Hostavin® 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterised by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet-paint. 收起 | |
| Hostavin® 3212 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3212 is a 2:1 synergistic mixture of an oxalanilide based UV absorber with a low molecular weight HALS. | |
| Hostavin® 3225-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3225-2 disp. is a 52 % aqueous dispersion of a mixture of a halogenated benzotriazole UV-absorber with a radical scavenger (HALS). | |
| Hostavin® 3315 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extracti...展开 Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile. 收起 | |
| Hostavin® 3326 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatin...展开 Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings. 收起 | |
| Hostavin® 3326 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 is an UV absorber with broad absorption. Besides cooling application it is mainly used as an UV stabilizer for a wide range of plastics. | |
| Hostavin® VSU P | Clariant Plastics & Coatings Ltd. | Hostavin® VSU is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerisation catalyst residues, fillers or from contact surfaces. Hostavin® VSU absorbs the...展开 Hostavin® VSU is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerisation catalyst residues, fillers or from contact surfaces. Hostavin® VSU absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems. 收起 | |
| Licocene® PE 4201 powder | Clariant Plastics & Coatings Ltd. | Licocene® PE 4201 powder is a low viscous, non-polar polyethylene wax that is a highly efficient lubricant. | |
| Licocene® PE 5301 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE 5301 granules is a low viscosity, high melting point Metallocene catalyzed Polyethylene wax. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licocene® PP MS 641 granules TP | Clariant Plastics & Coatings Ltd. | Licocene® PP MS 641 granules TP is a stabilized maleic anhydride grafted polypropylene wax. | |
| Licowax® 371 FP | Clariant Plastics & Coatings Ltd. | Licowax® 371 FP is an oxidized ethylene vinyl acetate (EVA) wax. | |
| Licowax® E flakes | Clariant Plastics & Coatings Ltd. | Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain the...展开 Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. 收起 | |
| Licowax® KPS flakes | Clariant Plastics & Coatings Ltd. | Licowax® KPS flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® KSL flakes | Clariant Plastics & Coatings Ltd. | Licowax® KSL flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® LP flakes | Clariant Plastics & Coatings Ltd. | Licowax® LP flakes is a montanic acid wax. | |
| Licowax® NC flakes | Clariant Plastics & Coatings Ltd. | Licowax® NC flakes is a montan-based acid wax. | |
| Licowax® OP flakes | Clariant Plastics & Coatings Ltd. | Licowax® OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® OP powder | Clariant Plastics & Coatings Ltd. | Licowax® OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® PE 190 powder | Clariant Plastics & Coatings Ltd. | Licowax® PE 190 powder is a non-polar high density polyethylene with low molecular weight. | |
| Licowax® PED 153 | Clariant Plastics & Coatings Ltd. | Licowax® PED 153 is an oxidized, high density polyethylene wax. | |
| Licowax® PED 191 powder | Clariant Plastics & Coatings Ltd. | Licowax® PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. | |
| Licowax® PED 521 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 521 granules is an oxidized polyethylene wax. | |
| Licowax® PED 522 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 522 granules is an oxidized, high density polyethylene wax. | |
| Licowax® S flakes | Clariant Plastics & Coatings Ltd. | Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properti...展开 Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties). 收起 | |
| Licowax® SW flakes | Clariant Plastics & Coatings Ltd. | Licowax® SW flakes is a montanic acid wax. | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 |
