| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...展开 Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. 收起 | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. 收起 | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Methyl Chloride | Occidental Chemical Corp. (OxyChem) | Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: ...展开 Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: cosmetics, suto polishes, furniture polishes, and paper coatings. 收起 | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...展开 Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. 收起 | |
| Methylene Chloride - Decaffeination Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methyl...展开 Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methylene Chloride - Decaffeination Grade is used as a solvent for pharmaceutical coatings. 收起 | |
| Methylene Chloride - Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a de...展开 Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a degreasing agent for various temperature sensitive parts. 收起 | |
| Methylene Chloride - Special Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chlori...展开 Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chloride - Special Grade is used as an auxiliary-blowing agent in the production of slab-stock flexible polyurethane foams. 收起 | |
| Methylene Chloride - Technical Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene C...展开 Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene Chloride - Technical Grade is used as an a solvent in paint removers and paint mask cleaners. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| Perchloroethylene - Fluorocarbon (PTAP) Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120....展开 Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Fluorocarbon (PTAP) Grade is primarily used in metal and dry cleaning. 收起 | |
| Perchloroethylene - Industrial Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between ...展开 Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Industrial Grade is used in a variety of applications which require cold-cleaning operations. 收起 | |
| Perchloroethylene - Isomerization Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomer...展开 Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomerization and regeneration applications. 收起 | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...展开 Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. 收起 | |
| Perchloroethylene - Vapor Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Per...展开 Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Perchloroethylene - Vapor Degreasing Grade is used in the removal of high melting point pitches and waxes. 收起 | |
| pHLEX™ 100 | Ashland | pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 100 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| pHLEX™ 110 | Ashland | pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 110 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| PVP K-120 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于金属淬火浴。 | |
| PVP K-15 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于清洁剂中抑制染料迁移，用于平板印刷中增强油墨的憎水性。 | |
| PVP K-30 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| PVP K-60 | Ashland | 聚乙烯基吡咯烷酮，认为是生理学惰性的，可用水和大多数常用有机增塑剂增塑 | |
| PVP K-90 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...展开 Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Strodex™ FT-100 | Ashland | 可在水性涂料中提高色浆的分散稳定性，减少浮色和擦拭掉色。它可作为主要或辅助乳化剂用于制备水性乳液体系。它可为成品乳胶提供良好的机械性能和储存性能以及低凝结点 |
