| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...展开 Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...展开 Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...展开 Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...展开 Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Methyl Chloride | Occidental Chemical Corp. (OxyChem) | Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: ...展开 Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: cosmetics, suto polishes, furniture polishes, and paper coatings. 收起 | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...展开 Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. 收起 | |
| Methylene Chloride - Decaffeination Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methyl...展开 Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methylene Chloride - Decaffeination Grade is used as a solvent for pharmaceutical coatings. 收起 | |
| Methylene Chloride - Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a de...展开 Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a degreasing agent for various temperature sensitive parts. 收起 | |
| Methylene Chloride - Special Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chlori...展开 Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chloride - Special Grade is used as an auxiliary-blowing agent in the production of slab-stock flexible polyurethane foams. 收起 | |
| Methylene Chloride - Technical Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene C...展开 Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene Chloride - Technical Grade is used as an a solvent in paint removers and paint mask cleaners. 收起 | |
| Perchloroethylene - Fluorocarbon (PTAP) Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120....展开 Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Fluorocarbon (PTAP) Grade is primarily used in metal and dry cleaning. 收起 | |
| Perchloroethylene - Industrial Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between ...展开 Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Industrial Grade is used in a variety of applications which require cold-cleaning operations. 收起 | |
| Perchloroethylene - Isomerization Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomer...展开 Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomerization and regeneration applications. 收起 | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...展开 Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. 收起 | |
| Perchloroethylene - Vapor Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Per...展开 Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Perchloroethylene - Vapor Degreasing Grade is used in the removal of high melting point pitches and waxes. 收起 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...展开 Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. |
