| PERMANENT YELLOW BAW | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW BAW is a diarylide yellow pigment with good performance in water based inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is often used in offset inks. | |
| PERMANENT YELLOW BH-400 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW BH-400 is a diarylide strong yellow pigment with good resistance and fastness to solvents. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for PA and PP inks. | |
| PERMANENT YELLOW BH-TXL | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW BH-TXL is a highly transparent and high glossy diarylide yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for PA, NC, and PP inks. | |
| PERMANENT YELLOW BHFW | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW BHFW is a highly transparent and high glossy diarylide yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH of 6.5-7.5. It is recommended for water based inks. | |
| PERMANENT YELLOW BHGS | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW BHGS is a reddish shade diarylide strong yellow pigment with high transparency, good resistance and fastness to solvents. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for PP inks, NC inks, o...展开 PERMANENT YELLOW BHGS is a reddish shade diarylide strong yellow pigment with high transparency, good resistance and fastness to solvents. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for PP inks, NC inks, offset inks, and PA inks. 收起 | |
| PERMANENT YELLOW G-16 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW G-16 is a diarylide strong yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is desired such as powder coatings, offset inks, ...展开 PERMANENT YELLOW G-16 is a diarylide strong yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is desired such as powder coatings, offset inks, PP inks and PVC. 收起 | |
| PERMANENT YELLOW G-16B | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW G-16B is a diarylide strong yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is desired such as offset inks, water based inks...展开 PERMANENT YELLOW G-16B is a diarylide strong yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is desired such as offset inks, water based inks and PVC. 收起 | |
| PERMANENT YELLOW G-74 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW G-74 is an arylamide yellow pigment with good opacity and very good resistance to light. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paints, water based decorative paints...展开 PERMANENT YELLOW G-74 is an arylamide yellow pigment with good opacity and very good resistance to light. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paints, water based decorative paints, offset inks, water based inks, and NC inks. 收起 | |
| PERMANENT YELLOW OP-180 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW OP-180 is an arylamide yellow pigment with a reddish shade, good opacity and very good resistance to light. This product has an oil absorption of 35-45 m/100g and a pH value of 6.5-7.5. It is recommended for industrial paints, water based...展开 PERMANENT YELLOW OP-180 is an arylamide yellow pigment with a reddish shade, good opacity and very good resistance to light. This product has an oil absorption of 35-45 m/100g and a pH value of 6.5-7.5. It is recommended for industrial paints, water based decorative paints, and water based inks. 收起 | |
| PERMANENT YELLOW OP-206 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW OP-206 is a strong reddish shade yellow pigment with high opacity and excellent weather resistance. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paints and powder coatings...展开 PERMANENT YELLOW OP-206 is a strong reddish shade yellow pigment with high opacity and excellent weather resistance. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paints and powder coatings. 收起 | |
| PERMANENT YELLOW SF | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW SF is a diarylide yellow pigment with good flowing. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for offset inks and UV inks. | |
| PERMANENT YELLOW SFL-01 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW SFL-01 is a diarylide yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for offset inks. | |
| PERMANENT YELLOW SFL-02 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW SFL-02 is a diarylide yellow pigment with good flowing. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for offset inks. | |
| PERMANENT YELLOW TR-02 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW TR-02 is a strong reddish shade yellow pigment with good resistance to both light and solvents. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is also suitable for powder coatings, water based decorative...展开 PERMANENT YELLOW TR-02 is a strong reddish shade yellow pigment with good resistance to both light and solvents. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is also suitable for powder coatings, water based decorative paint, and offset inks 收起 | |
| PERMANENT YELLOW TR-117 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW TR-117 is an arylamide yellow pigment with high transparency. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, textile printings, industrial paints, and water ...展开 PERMANENT YELLOW TR-117 is an arylamide yellow pigment with high transparency. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, textile printings, industrial paints, and water based inks. 收起 | |
| PERMANENT YELLOW WI-14 | Zhejiang Baihe Chemical Holding Group Company | PERMANENT YELLOW WI-14 is a high transparent and high gloss diarylide yellow pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It is recommended for water based inks. | |
| PIGMENT YELLOW BH-1501 | Zhejiang Baihe Chemical Holding Group Company | PIGMENT YELLOW BH-1501 is a very reddish shade pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints, water based ink, and PVC. | |
| PIGMENT YELLOW BH-3RL | Zhejiang Baihe Chemical Holding Group Company | PIGMENT YELLOW BH-3RL is a reddish yellow pigment with high transparency, heat and color fastness properties. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for industrial paint, coil coatings, powder coatings...展开 PIGMENT YELLOW BH-3RL is a reddish yellow pigment with high transparency, heat and color fastness properties. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for industrial paint, coil coatings, powder coatings, solvent based decorative paint, offset inks, and UV inks. 收起 | |
| PIGMENT YELLOW BH-R40 | Zhejiang Baihe Chemical Holding Group Company | PIGMENT YELLOW BH-R40 is an isoindoline yellow pigment with high opacity and reddish tint. This product has an oil absorption of 35-45 ml/100g and a pH value of 5-6. It is recommended for industrial paint, coil coating, powder coatings, and solvent based ...展开 PIGMENT YELLOW BH-R40 is an isoindoline yellow pigment with high opacity and reddish tint. This product has an oil absorption of 35-45 ml/100g and a pH value of 5-6. It is recommended for industrial paint, coil coating, powder coatings, and solvent based decorative paint. 收起 | |
| QUINDO RED 1170 | Zhejiang Baihe Chemical Holding Group Company | QUINDO RED 1170 is a high performance pigment with a pink shade that exhibits transparent properties. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for water based decorative paint, textile printing, and wate...展开 QUINDO RED 1170 is a high performance pigment with a pink shade that exhibits transparent properties. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for water based decorative paint, textile printing, and water based inks. 收起 | |
| QUINDO RED 1171 | Zhejiang Baihe Chemical Holding Group Company | QUINDO RED 1171 is a high performance pigment with a pink shade that exhibits fastness properties. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coatings, powder coatings, solvent b...展开 QUINDO RED 1171 is a high performance pigment with a pink shade that exhibits fastness properties. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coatings, powder coatings, solvent based decorative paint, textile printing, offset inks, PA inks, NC inks and UV inks. 收起 | |
| QUINDO RED 1178 | Zhejiang Baihe Chemical Holding Group Company | QUINDO RED 1178 is a red pigment with a pink shade and good fastness properties. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for water based decorative paint and OEM paint. | |
| QUINDO VIOLET BH-201 | Zhejiang Baihe Chemical Holding Group Company | QUINDO VIOLET BH-201 is a bluish shade pigment with general fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, water based decorative paints, OEM paints, ...展开 QUINDO VIOLET BH-201 is a bluish shade pigment with general fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, water based decorative paints, OEM paints, and UV inks. 收起 | |
| QUINDO VIOLET BH-301 | Zhejiang Baihe Chemical Holding Group Company | QUINDO VIOLET BH-301 is a violet pigment with a yellowish shade and good fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, OEM paints, offset inks, PVC, ...展开 QUINDO VIOLET BH-301 is a violet pigment with a yellowish shade and good fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, OEM paints, offset inks, PVC, PO, and fiber. 收起 | |
| QUINDO VIOLET BH-501 | Zhejiang Baihe Chemical Holding Group Company | QUINDO VIOLET BH-501 is a pigment with a yellowish shade and good fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, OEM paints, offset inks, PVC, PO and ...展开 QUINDO VIOLET BH-501 is a pigment with a yellowish shade and good fastness properties. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paints, coil coatings, OEM paints, offset inks, PVC, PO and fiber. 收起 | |
| RED LAKE 2170 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE 2170 is a barium salt of azo lake scarlet pigment with a strong color and good resistance to solvents and heat. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PVC and offset inks. | |
| RED LAKE 258 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE 258 is a barium salt of azo lake scarlet pigment with good performance in water based inks. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is suitable for use in offset inks. | |
| RED LAKE NF | Zhejiang Baihe Chemical Holding Group Company | RED LAKE NF is a scarlet barium salt of azo lake pigment with high transparency and high gloss. It has a low viscosity and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PA ink...展开 RED LAKE NF is a scarlet barium salt of azo lake pigment with high transparency and high gloss. It has a low viscosity and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PA inks, NC inks, offset inks, and PP inks. 收起 | |
| RED LAKE OF-08 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE OF-08 is a barium salt of azo lake scarlet pigment with good overall performance. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for offset inks, water based inks, and PVC. | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 416 | Elkem Silicones | SILCOLAPSE 416 is a compound based on polydimethyl siloxane oil and silica. It has the characteristic of being easy to disperse in most foaming mediums. | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE 7611 | Elkem Silicones | SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst). | |
| SILCOLEASE ADD 107 | Elkem Silicones | SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the relea...展开 SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the release system on PET film both when laminated against adhesives and reeled as coated film. 收起 | |
| SILCOLEASE ADD 382 | Elkem Silicones | SILCOLEASE ADD 382 is a silicone based additive used with a reactive solventless silicone polymer system for POLYESTER (PET) FILM RELEASE COATING applications. | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE CATA 11091 M | Elkem Silicones | SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 12070 | Elkem Silicones | SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 340 | Elkem Silicones | SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high...展开 SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high speeds. 收起 | |
| SILCOLEASE CATA 62 A | Elkem Silicones | SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food conta...展开 SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food contact application. 收起 | |
| SILCOLEASE CATA 62 B | Elkem Silicones | SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applicati...展开 SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applications. 收起 | |
| SILCOLEASE CATA 90 B | Elkem Silicones | SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALY...展开 SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALYST 90 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 91 B | Elkem Silicones | SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is use...展开 SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE CATA 93 B | Elkem Silicones | SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B i...展开 SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 94 B | Elkem Silicones | SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in po...展开 SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 70840 | Elkem Silicones | SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin...展开 SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin compound forming an ELASTOMERIC COATING. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 70827 A | Elkem Silicones | SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOL...展开 SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOLEASE EMULSION 70840. It only catalyses polycondensation type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE MRA 385 | Elkem Silicones | SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower do...展开 SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower doses than 1st generation mist reducing products at line speeds up to 1600 m/min. Typical addition levels from 2% to 6% are sufficient for most applications up to about 1000 m/min. 收起 | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-168 | Elkem Silicones | SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkabl...展开 SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkable coating. Post cure is recommended with tin catalyzed emulsions. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-370 | Elkem Silicones | SILCOLEASE PC-370 is a platinum catalyst compound for use with polyaddition solventless release coatings. The catalyst complex is dispersed in a vinyl terminated siloxane fluid for ease of addition. | |
| SILCOLEASE PC-675 | Elkem Silicones | SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits ...展开 SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits very low polarity and surface tension more akin to high molecular weight di-methyl silicones. When blended at levels of 1-6% into the SILCOLEASE UV POLY 200 UV/EB silicone polymer release coating system, it effectively acts as a low releaseControlledReleaseAdditive (CRA-minus). It also cuts both dynamic (Kd) and static (Ks) coefficients of friction, up to 50% compared with standard UV Premium Release formulations. SILCOLEASE PC-675 modified silicone release chemistries result in smoother coatings with often dramatically reduced release zippiness against very aggressive adhesives. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. 收起 | |
| SILCOLEASE PC-850 | Elkem Silicones | SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...展开 SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-94 | Elkem Silicones | SILCOLEASE PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction. SILCOLEASE PC-94, when properly formulated with a release polymer e...展开 SILCOLEASE PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction. SILCOLEASE PC-94, when properly formulated with a release polymer emulsion, provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE POLY 11362 | Elkem Silicones | SILCOLEASE POLY 11362 polymer is a low vinyl content silicone fluid which, when properly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. The SILCOLEASE POLY 11362 release coating system is comprised of a vinyl si...展开 SILCOLEASE POLY 11362 polymer is a low vinyl content silicone fluid which, when properly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. The SILCOLEASE POLY 11362 release coating system is comprised of a vinyl silicone polymer, a methyl hydrogen siloxane crosslinker and a platinum catalyst. The resulting addition reaction is very rapid and therefore an inhibitor is included to provide bath stability at ambient conditions while allowing rapid cures at elevated temperatures. 收起 | |
| SILCOLEASE POLY 11362 E2 | Elkem Silicones | SILCOLEASE RESINE 11362 is a solventless silicone polymer used for release coating of papers, films and various substrates. | |
| SILCOLEASE POLY 11364 | Elkem Silicones | SILCOLEASE POLY 11364 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates. | |
| SILCOLEASE POLY 11365 | Elkem Silicones | SILCOLEASE POLY 11365 polymer is a low vinyl content silicone fluid which, when properly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. The SILCOLEASE POLY 11365 release coating system is comprised of a vinyl si...展开 SILCOLEASE POLY 11365 polymer is a low vinyl content silicone fluid which, when properly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. The SILCOLEASE POLY 11365 release coating system is comprised of a vinyl silicone polymer, a methyl hydrogen siloxane crosslinker and a platinum catalyst. The resulting addition reaction is very rapid and therefore an inhibitor is included to provide bath stability at ambient conditions while allowing rapid cures at elevated temperatures. 收起 | |
| SILCOLEASE POLY 11365 E2 | Elkem Silicones | SILCOLEASE RESIN 11365 is a solventless silicone polymer used for release coating of papers, films and various substrates. | |
| SILCOLEASE POLY 11367 | Elkem Silicones | SILCOLEASE POLY 11367 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASEPOLY 11367 is mixed at the point of use with a methyl hydrogen siloxane cross...展开 SILCOLEASE POLY 11367 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASEPOLY 11367 is mixed at the point of use with a methyl hydrogen siloxane crosslinker and a platinum catalyst. 收起 | |
| SILCOLEASE POLY 11367 E2 | Elkem Silicones | SILCOLEASE RESIN 11367 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates. | |
| SILCOLEASE POLY 11384 | Elkem Silicones | SILCOLEASE RESIN 11384 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates. | |
| SILCOLEASE POLY 330 | Elkem Silicones | SILCOLEASE POLY 330 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates. It has been especially designed to give excellent anchorage on PET film. |
