| RED LAKE 2170 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE 2170 is a barium salt of azo lake scarlet pigment with a strong color and good resistance to solvents and heat. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PVC and offset inks. | |
| RED LAKE 258 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE 258 is a barium salt of azo lake scarlet pigment with good performance in water based inks. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is suitable for use in offset inks. | |
| RED LAKE NF | Zhejiang Baihe Chemical Holding Group Company | RED LAKE NF is a scarlet barium salt of azo lake pigment with high transparency and high gloss. It has a low viscosity and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PA ink...展开 RED LAKE NF is a scarlet barium salt of azo lake pigment with high transparency and high gloss. It has a low viscosity and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for PA inks, NC inks, offset inks, and PP inks. 收起 | |
| RED LAKE OF-08 | Zhejiang Baihe Chemical Holding Group Company | RED LAKE OF-08 is a barium salt of azo lake scarlet pigment with good overall performance. This product has an oil absorption of 40-50 ml/100g and a pH value of 7-8. It is recommended for offset inks, water based inks, and PVC. | |
| Refined Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Refined Dibenzothiazole Disulfide is a light yellow powder or granule that is primarily used as a as plasticizer and delay agent in chloroprene rubbers and sealants. It is commonly combined with a secondary accelerator in the synthesis of polymers. Refin...展开 Refined Dibenzothiazole Disulfide is a light yellow powder or granule that is primarily used as a as plasticizer and delay agent in chloroprene rubbers and sealants. It is commonly combined with a secondary accelerator in the synthesis of polymers. Refined Dibenzothiazole Disulfide has improved scorch safety compared to MBT. 收起 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 | |
| Setalin™ V 270C | Lawter | Setalin™ V 270C is an alkyd resin that has good pigment wetting properties and provides hard films that make it ideal for use in offset printing systems. Setalin™ V 270C is also considered ideal for use in wetting varnishes, in sheet-fed, webfed offset an...展开 Setalin™ V 270C is an alkyd resin that has good pigment wetting properties and provides hard films that make it ideal for use in offset printing systems. Setalin™ V 270C is also considered ideal for use in wetting varnishes, in sheet-fed, webfed offset and letterpress inks. 收起 | |
| Setalin™ V 333 C | Lawter | Setalin™ V 333 C is a linseed oil-based alkyd resin that has low viscosity with good pigment wetting and litho properties. Crushing or grinding the resin can lead to more cleanliness and color strength than conventional wetting vehicles, while good flow c...展开 Setalin™ V 333 C is a linseed oil-based alkyd resin that has low viscosity with good pigment wetting and litho properties. Crushing or grinding the resin can lead to more cleanliness and color strength than conventional wetting vehicles, while good flow characteristics are maintained. It is also fast setting, has high gloss and low bronzing features. Setalin™ V 333 C is used in sheet-fed and webfed offset inks and in wetting varnishes. 收起 | |
| Setalin™ V 402 | Lawter | Setalin™ V 402 is a soya bean oil-based alkyd resin that exhibits good litho and pigment wetting properties, making the resin ideally suited for use in web offset inks. It is fast setting, has high gloss while low odor and yellowing features make up addit...展开 Setalin™ V 402 is a soya bean oil-based alkyd resin that exhibits good litho and pigment wetting properties, making the resin ideally suited for use in web offset inks. It is fast setting, has high gloss while low odor and yellowing features make up additional benefits. Setalin™ V 402 is good in 3-piece can metal decorating inks and in sheet-fed and low odor inks. 收起 | |
| Setalin™ V 407 E | Lawter | Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be use...展开 Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be used in 3-piece can metal decorating inks, offsets and over print varnishes. 收起 | |
| Setalin™ V 439C | Lawter | Setalin™ V 439C is a long-oil alkyd resin based on linseed oil that has good water pick-up and a controlled polarity which is ideal for water balance in quick-set inks. A further advantage is that the oil content is close to 70% making Setalin™ V 439C sui...展开 Setalin™ V 439C is a long-oil alkyd resin based on linseed oil that has good water pick-up and a controlled polarity which is ideal for water balance in quick-set inks. A further advantage is that the oil content is close to 70% making Setalin™ V 439C suitable for use in other inks like gloss offsets and heatsets. 收起 | |
| Setalin™ V 555 C | Lawter | Setalin™ V 555 C is a linseed oil-based alkyd resin with good litho and pigment wetting properties which in turn act as a good pigment binder on most printable surfaces. Flushing or grinding the resin creates more cleanliness and color strength than conve...展开 Setalin™ V 555 C is a linseed oil-based alkyd resin with good litho and pigment wetting properties which in turn act as a good pigment binder on most printable surfaces. Flushing or grinding the resin creates more cleanliness and color strength than conventional wetting vehicles while retaining good flow characteristics. Setalin™ V 555 C is fast setting, has high gloss and low bronzing making it ideal for use in sheet-fed and webfed offset inks and wetting varnishes. 收起 | |
| Setalin™ V 700 C | Lawter | Setalin™ V 700 C is a linseed oil-based alkyd resin with medium viscosity and good litho and pigment wetting properties. Flushing or grinding the resin leads to deeper color strength and cleanliness than conventional wetting vehicles, while retaining good...展开 Setalin™ V 700 C is a linseed oil-based alkyd resin with medium viscosity and good litho and pigment wetting properties. Flushing or grinding the resin leads to deeper color strength and cleanliness than conventional wetting vehicles, while retaining good flow characteristics. Setalin™ V 700 C is fast setting, has high gloss, low brozing features and is used in webfed and sheet-fed offset inks and wetting varnishes. 收起 | |
| Setalin™ V 803 C | Lawter | Setalin™ V 803 C is a soya bean oil-based alkyd resin with low or medium viscosity that can carry and print larger pigment loads than conventional alkyds and bodied oils. It displays equal color development to other drying oil-modified linear polyesters a...展开 Setalin™ V 803 C is a soya bean oil-based alkyd resin with low or medium viscosity that can carry and print larger pigment loads than conventional alkyds and bodied oils. It displays equal color development to other drying oil-modified linear polyesters and is suitable for use in heat-induced drying applications. Setalin™ V 803 C has good pigment wetting benefits and along with water balance, high gloss and low misting properties makes it ideal for use in sheet-fed offset, webfed offset and metal deco inks as well as wetting varnishes. 收起 | |
| Setaprint™ 1200C | Lawter | Setaprint™ 1200C is a rosin-modified resin with a medium to high solubility mixed with a medium to high viscosity in mineral distillates. Because of its high molecular weight, Setaprint™ 1200C can be combined with other resins, providing much formulation ...展开 Setaprint™ 1200C is a rosin-modified resin with a medium to high solubility mixed with a medium to high viscosity in mineral distillates. Because of its high molecular weight, Setaprint™ 1200C can be combined with other resins, providing much formulation freedom. It is fast setting with high gloss and less gelling and has low misting and tack features. It is suitable for use in offsets, in gel and let down varnishes and in sheet-fed inks. 收起 | |
| Setaprint™ 1310 E | Lawter | Setaprint™ 1310 E is a phenolic-modified rosin resin that shows good compatibility with mineral distillates where it has low viscosity. It is light in color, possesses good pigment wetting properties and a low odor. Its favorable compatibility makes it su...展开 Setaprint™ 1310 E is a phenolic-modified rosin resin that shows good compatibility with mineral distillates where it has low viscosity. It is light in color, possesses good pigment wetting properties and a low odor. Its favorable compatibility makes it suitable for use with aromatic-free mineral distillates. Setaprint™ 1310 E can be used in all kinds of inks including offsets, sheet-fed and gloss offsets, letterpress as well as overprint varnishes and grinding and flush varnishes. 收起 | |
| Setaprint™ 1350 C | Lawter | Setaprint™ 1350 C is a phenolic-modified rosin ester that shows medium solubility mixed with medium viscosity in mineral distillates. It is compatible with other resins and shows fast setting, low misting and high gloss benefits. Setaprint™ 1350 C can be ...展开 Setaprint™ 1350 C is a phenolic-modified rosin ester that shows medium solubility mixed with medium viscosity in mineral distillates. It is compatible with other resins and shows fast setting, low misting and high gloss benefits. Setaprint™ 1350 C can be used in offsets, in sheet-fed inks, in web offset, heatset and coldset inks and in gel and let down varnishes. 收起 | |
| Setaprint™ 1600 C | Lawter | Setaprint™ 1600 C is a phenolic-modified rosin ester with a high molecular weight that makes it ideal for combination with other resins, providing much formulation freedom. Its viscosity in linseed oil is medium to high. The resin shows medium solubility ...展开 Setaprint™ 1600 C is a phenolic-modified rosin ester with a high molecular weight that makes it ideal for combination with other resins, providing much formulation freedom. Its viscosity in linseed oil is medium to high. The resin shows medium solubility fused with medium to high viscosity in mineral distillates. Setaprint™ 1600 C is fast setting and suited to high speed presses. It also has low misting and tack features with less gelling and high gloss as added benefits. It is used in offsets, gel and let down varnishes, in sheet-fed inks and in web offset, heatset and coldset applications. 收起 | |
| Setaprint™ 1800 C | Lawter | Setaprint™ 1800 C is a phenolic-modified rosin ester that has medium solubility as well as exhibiting a combination of medium to high viscosity in mineral distillates. Its high molecular weight makes the resin ideal for combination with other resins. Seta...展开 Setaprint™ 1800 C is a phenolic-modified rosin ester that has medium solubility as well as exhibiting a combination of medium to high viscosity in mineral distillates. Its high molecular weight makes the resin ideal for combination with other resins. Setaprint™ 1800 C is fast setting and functions well in high speed presses with low misting and tack as added benefits. It also shows high gloss, less gelling and good water balance properties and can be used in offsets, gel and let down varnishes, in web offset, heatset and coldset inks as well as sheet-fed inks. 收起 | |
| Setaprint™ 2330 C | Lawter | Setaprint™ 2330 C is a phenolic-modified rosin ester that has medium solubility along with medium viscosity in mineral distillates. The resin combines well with other resins and has fast setting, high gloss and low misting properties that makes is ideally...展开 Setaprint™ 2330 C is a phenolic-modified rosin ester that has medium solubility along with medium viscosity in mineral distillates. The resin combines well with other resins and has fast setting, high gloss and low misting properties that makes is ideally suited for use in offsets, gel and let down varnishes and sheet-fed inks. 收起 | |
| Setaprint™ 2376 E | Lawter | Setaprint™ 2376 E is a high soluble, medium to low viscous resin that maintains good pigment wetting properties with a high gloss. The product combines expertly with lower soluble resins to increase set speed. It is used in varnishes, aromatic free inks, ...展开 Setaprint™ 2376 E is a high soluble, medium to low viscous resin that maintains good pigment wetting properties with a high gloss. The product combines expertly with lower soluble resins to increase set speed. It is used in varnishes, aromatic free inks, offsets and letterpress applications. 收起 | |
| Setaprint™ 2406 C | Lawter | Setaprint™ 2406 C is a phenolic-modified rosin ester that is soluble, with a low viscosity in mineral distillates. The resin is meant for high solubility applications and offers good wetting and pigment loading characteristics. Setaprint™ 2406 C is used i...展开 Setaprint™ 2406 C is a phenolic-modified rosin ester that is soluble, with a low viscosity in mineral distillates. The resin is meant for high solubility applications and offers good wetting and pigment loading characteristics. Setaprint™ 2406 C is used in offsets and in dispersion and flush varnishes. 收起 | |
| Setaprint™ 2654 C | Lawter | Setaprint™ 2654 C is a phenolic-modified rosin ester that has medium solubility along with medium to high viscosity in mineral distillates. Its high molecular weight makes it ideal for combination with other resins, providing formulation freedom. Setaprin...展开 Setaprint™ 2654 C is a phenolic-modified rosin ester that has medium solubility along with medium to high viscosity in mineral distillates. Its high molecular weight makes it ideal for combination with other resins, providing formulation freedom. Setaprint™ 2654 C is fast setting and ideal in high speed presses. It also has good low misting, low tack, high gloss and less gelling features. It is ideally suited for use in offsets, in gel and let down varnishes, in sheet-fed inks and in web offset, heatset and coldset applications. 收起 | |
| Setaprint™ 2655 C | Lawter | Setaprint™ 2655 C is a phenolic-modified rosin ester that has medium to high solubility along with medium viscosity in mineral distillates. It can be combined with other resins with additional benefits being a fast setting ability, low misting and high gl...展开 Setaprint™ 2655 C is a phenolic-modified rosin ester that has medium to high solubility along with medium viscosity in mineral distillates. It can be combined with other resins with additional benefits being a fast setting ability, low misting and high gloss features. Setaprint™ 2655 C is ideally suited to be used in offsets, in gel and let down varnishes, web offset, heatset and coldset applications and in sheet-fed inks. 收起 | |
| Setaprint™ 3855 C | Lawter | Setaprint™ 3855 C is a phenolic-modified rosin ester that shows a high solubility which makes it ideal for use in aromatic-free mineral distillates. It also displays a medium to high viscosity in mineral distillates, good water balance, with high gloss an...展开 Setaprint™ 3855 C is a phenolic-modified rosin ester that shows a high solubility which makes it ideal for use in aromatic-free mineral distillates. It also displays a medium to high viscosity in mineral distillates, good water balance, with high gloss and pigment wetting abilities as additional benefits. Setaprint™ 3855 C can be used in web offset, heatset and coldset applications as well as sheet-fed inks. 收起 | |
| Setaprint™ 5000 C | Lawter | Setaprint™ 5000 C is a phenolic-modified rosin ester with medium solubility, medium to high viscosity and a high molecular weight that makes it ideal for combination with other resins. It is fast setting and functions well in high speed presses. Setaprint...展开 Setaprint™ 5000 C is a phenolic-modified rosin ester with medium solubility, medium to high viscosity and a high molecular weight that makes it ideal for combination with other resins. It is fast setting and functions well in high speed presses. Setaprint™ 5000 C has low misting and tack properties, offers less gelling, more gloss and has good water balance properties. It is considered ideal for use in offset, gel and let down varnishes, web offset, coldset, heatset applications and in sheet-fed inks. 收起 | |
| Setaprint™ 6710 C | Lawter | Setaprint™ 6710 C is a phenolic-modified rosin ester that has medium solubility along with a viscosity that is medium to high in mineral distillates. Its high molecular weight makes it ideal to be combined with other resins. Setaprint™ 6710 C is fast sett...展开 Setaprint™ 6710 C is a phenolic-modified rosin ester that has medium solubility along with a viscosity that is medium to high in mineral distillates. Its high molecular weight makes it ideal to be combined with other resins. Setaprint™ 6710 C is fast setting, has high gloss, displays low tack and misting and good water balance properties. It is suitable for use in offset, gel and let down varnishes, sheet-fed inks and in web offset, heatseat and coldset applications. 收起 | |
| Setaprint™ 7050C | Lawter | Setaprint™ 7050C is a rosin-modified resin that has very low compatibility with mineral distillates while showing limited compatibility with vegetable oils. It is a high molecular weight rosin resin for the creation of mineral distillate-free offset inks ...展开 Setaprint™ 7050C is a rosin-modified resin that has very low compatibility with mineral distillates while showing limited compatibility with vegetable oils. It is a high molecular weight rosin resin for the creation of mineral distillate-free offset inks that have fatty acid ester solvents as a base. Inks that use the resin display a fast solvent release, good rub resistance and a high gloss. The rheological properties of the resin can be altered by controlled gelling with suited gelling agents. Setaprint™ 7050C is ideal for use in webfed offset and sheet-fed inks. 收起 | |
| Setaprint™ 8758 C | Lawter | Setaprint™ 8758 C is a rosin-modified resin that shows high solubility together with medium to high viscosity in mineral distillates. Its high molecular weight makes it ideal for combination with other resins, providing much formulation freedom. Setaprint...展开 Setaprint™ 8758 C is a rosin-modified resin that shows high solubility together with medium to high viscosity in mineral distillates. Its high molecular weight makes it ideal for combination with other resins, providing much formulation freedom. Setaprint™ 8758 C is fast setting and functional in high speed presses, has high gloss, less gelling, low tack and misting and good water balance properties. It is used in offset, gel and let down varnishes, sheet-fed inks and in web offset, heatset and coldset applications. 收起 | |
| Snowtack® 776A | Lawter | Snowtack® 776A is a tackifier resin with a solid content of 50% and performs as a standard purpose ester grade for acrylic polymers and SBR. It is part of the series of Snowtack® tackifier resins created for the needs of surface coating and adhesives indu...展开 Snowtack® 776A is a tackifier resin with a solid content of 50% and performs as a standard purpose ester grade for acrylic polymers and SBR. It is part of the series of Snowtack® tackifier resins created for the needs of surface coating and adhesives industries. 收起 | |
| Snowtack® 790G | Lawter | Snowtack® 790G is a tackifier resin with 57% solid content and is designed to boost cohesive strength and water resistance. It is part of the series of Snowtack® tackifier resins created for the needs of the adhesive and surface coating industries. | |
| Snowtack® SE100G | Lawter | Snowtack® SE100G is a high softening point tackifier for PSA adhesives that are used in labels and tape applications that need good mandrel performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the n...展开 Snowtack® SE100G is a high softening point tackifier for PSA adhesives that are used in labels and tape applications that need good mandrel performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...展开 Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. 收起 | |
| Snowtack® SE772A | Lawter | Snowtack® SE772A is a tackifier resin with 50% solids and functions as a standard purpose ester grade for acrylic polymers and SBR, with the added benefit of staging a good low temperature performance. The product is part of a series of Snowtack® tackifie...展开 Snowtack® SE772A is a tackifier resin with 50% solids and functions as a standard purpose ester grade for acrylic polymers and SBR, with the added benefit of staging a good low temperature performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...展开 Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. 收起 | |
| Snowtack® SE790 | Lawter | Snowtack® SE790 is a tackifier resin with 57% solids and is designed to improve water resistance and cohesive strength. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhes...展开 Snowtack® SE790 is a tackifier resin with 57% solids and is designed to improve water resistance and cohesive strength. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| Sodium Ethyl Xanthate | Hainan Zhongxin Chemical Co., Ltd. | Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has othe...展开 Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has other applications as an additive to paints and rubber to protect it against oxidation. 收起 | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...展开 Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. 收起 | |
| Sodium Hypophosphite | Hainan Zhongxin Chemical Co., Ltd. | Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requir...展开 Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requirements on properties. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...展开 Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. 收起 | |
| Synkyd™ 50 E | Lawter | Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in...展开 Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in offset, sheet-fed, letterpress and screen ink applications. 收起 | |
| Talc Powder DY1 | Hainan Zhongxin Chemical Co., Ltd. | Talc Powder DY1, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a paint grade fine white powder with a mesh size of 325MESH. It is primarily used in the production of paint and coatings. | |
| Talc Powder DY2 | Hainan Zhongxin Chemical Co., Ltd. | Talc powder DY2, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a fine white powder with a mesh size of 800MESH. It is paint grade and primarily used in the production of paint and coatings. | |
| Talc Powder DY3 | Hainan Zhongxin Chemical Co., Ltd. | Talc powder DY3, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a fine white powder with a mesh size of 800MESH. It is paint grade and primarily used in the production of paint and coatings. | |
| Tetra Potassium Pyrophosphate (TKPP) | Hainan Zhongxin Chemical Co., Ltd. | Tetra Potassium Pyrophosphate (TKPP) is a water insoluble white powder with a minimum content of 96% K4P2O7. It is primarily used as an additive in the electroplating industry, this product has other uses including dying. | |
| Tetrabromobisphenol A Bis-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. T...展开 Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. Tetrabromobisphenol A bis-(2,3-dibromopropyl ether) can also be used as an additive in EPS, PS, SAN, PO and PP. 收起 | |
| Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, A...展开 Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, ABS resin and rubber. 收起 | |
| Tetrabromophthalic Anhydride (TBPA) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings,...展开 Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings, business machines and television cabinets and is particularly effective in polyolefins, styrenic, polyamide, HIPS and polyester resins. 收起 | |
| Tetrachlorophthalic Anhydride (TCPA) | Hainan Zhongxin Chemical Co., Ltd. | Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments ...展开 Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments and dye intermediates. 收起 | |
| Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) | Hainan Zhongxin Chemical Co., Ltd. | Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is rec...展开 Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is recommended for use in cotton, leather, and polyester products. 收起 | |
| Tetramethyl Thiuram Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Tetramethyl Thiuram Disulfide is a white to light grey powder or granule primarily used as an accelerator in the production of rubbers, elastomers and sealants. It has fast cure rates and produces an excellent vulcanisation plateau with good heat aging an...展开 Tetramethyl Thiuram Disulfide is a white to light grey powder or granule primarily used as an accelerator in the production of rubbers, elastomers and sealants. It has fast cure rates and produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems. Good color retention is obtained in non-black vulcanization and a valuable secondary accelerator for the production of EPDM. 收起 | |
| Titanium Dioxide - Anatase Grade B101 | Hainan Zhongxin Chemical Co., Ltd. | Titanium Dioxide - Anatase Grade B101 is a tint-reducing powder that is made of 98% TiO2Min. It is primarily used in the production of paints, printing inks, rubber, glass, cosmetics, soap, plastics and paper etc. | |
| Titanium Dioxide - Rutile Grade | Hainan Zhongxin Chemical Co., Ltd. | Titanium Dioxide - Rutile Grade is a tint-reducing powder that is made of 93% TiO2Min. It is primarily used in the production of paints, printing inks, rubber, glass, cosmetics, soap, plastics and paper etc. | |
| TOLUIDINE DARK RED BH-05 | Zhejiang Baihe Chemical Holding Group Company | TOLUIDINE DARK RED BH-05 is an amaranth powder pigment with a strong color strength and high covering ability. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paints and powder coatings. | |
| TOLUIDINE SCARLET RED BH-06 | Zhejiang Baihe Chemical Holding Group Company | TOLUIDINE SCARLET RED BH-06 is a bright opaque red pigment with good light fastness. This product has an oil absorption of 30-40 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint. | |
| Tri(2-Chloroisopropyl) Phosphate (TCPP) | Hainan Zhongxin Chemical Co., Ltd. | Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins a...展开 Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC and adhesives. 收起 | |
| Trionol™ 1739 C | Lawter | Trionol™ 1739 C is a soya bean oil-based alkyd resin that is tough drying, hard and has a low odor that makes it suitable for use in three-piece flat metal decorating lithography. Trionol™ 1739 C also has good baking properties in metal, is fast setting, ...展开 Trionol™ 1739 C is a soya bean oil-based alkyd resin that is tough drying, hard and has a low odor that makes it suitable for use in three-piece flat metal decorating lithography. Trionol™ 1739 C also has good baking properties in metal, is fast setting, has high gloss and good pigment wetting properties. It can avoid gloss or yellow ghosting in sheet-fed inks, while it also has applications in webfed offset inks. 收起 | |
| Trionol™ 3000 C | Lawter | Trionol™ 3000 C is a linseed oil-based alkyd resin with a medium viscosity and good flow and pigment wetting properties. It provides stable rheology under high shear conditions because of the chemical buildup and visco-elastic behavior. Trionol™ 3000 C is...展开 Trionol™ 3000 C is a linseed oil-based alkyd resin with a medium viscosity and good flow and pigment wetting properties. It provides stable rheology under high shear conditions because of the chemical buildup and visco-elastic behavior. Trionol™ 3000 C is fast setting, has high gloss and good flow making it ideal for use in offsets, sheet-fed and letterpress inks and in wetting varnishes. 收起 | |
| Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) | Hainan Zhongxin Chemical Co., Ltd. | Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is a clear - yellowish liquid that has a chlorine content of 47%. It is primarily used as a general purpose chlorinated phosphate flame retardant. Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is recommended f...展开 Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is a clear - yellowish liquid that has a chlorine content of 47%. It is primarily used as a general purpose chlorinated phosphate flame retardant. Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is recommended for use in multiple resin types including, plyurethane, epoxy and phenolic. 收起 | |
| Tris(2-carboxyethyl)phosphine (TCEP) | Hainan Zhongxin Chemical Co., Ltd. | Tris(2-carboxyethyl)phosphine (TCEP) is a general purpose chlorinated phosphate ester flame retardant used in rigid polyurethane foams. It is recommended as flame retardant for block foam or slab foam, and as flame retardant or additive for rigid polyure...展开 Tris(2-carboxyethyl)phosphine (TCEP) is a general purpose chlorinated phosphate ester flame retardant used in rigid polyurethane foams. It is recommended as flame retardant for block foam or slab foam, and as flame retardant or additive for rigid polyurethane foams and oil. 收起 | |
| Trisodium Phosphate | Hainan Zhongxin Chemical Co., Ltd. | Trisodium phosphate and TSP is an insoluble white powder that is 98% pure. It is primarily used as a cleaning agent for soft water and electroplating. It can be used as a color fixer in fabric dyeing and flux in enamel ware production. | |
| TTA21 | Hainan Zhongxin Chemical Co., Ltd. | TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for pain...展开 TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for paints and coatings, it’s low viscosity and good fluidity makes it suitable for use in bulk manufacturing. 收起 | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...展开 Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. 收起 | |
| Ultrafine™ 1000PE | Lawter | Ultrafine™ 1000PE is a micronized polyethylene wax that has good rub, gloss and slip properties as well as aqueous and UV coatings that make it ideal for use in sheet-fed, heatset and liquid inks. | |
| Ultrafine™ 1WLS | Lawter | Ultrafine™ 1WLS is a micronized polytetrafluoroethylene (PTFE) wax powder that provides good rub resistance and slip, has a low particle size and is considered ideal for use in sheet-fed, heatset and liquid inks. | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...展开 Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 收起 | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...展开 Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 收起 | |
| Ultrapoly™ 452 E | Lawter | Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to...展开 Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to good wash out test values and narrow particle size distribution benefits. The wax compound is used in quickset, sheet-fed and heatset inks. 收起 | |
| Ultrapoly™ 990 E | Lawter | Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in qui...展开 Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in quickset, sheet-fed and heatset inks. 收起 | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uroset™ 100SC | Lawter | Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting an...展开 Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting and litho properties. Apart from offsets and letterpress inks, it is also suitable for use in metal deco inks. 收起 | |
| Uroset™ 2055C | Lawter | Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed ink...展开 Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed inks. 收起 | |
| Uroset™ 8802 C | Lawter | Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maint...展开 Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maintaining good water balance and good rheological and press stability. Uroset™ 8802 C is suited for use as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8825 C | Lawter | Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C c...展开 Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C can be used as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8850C | Lawter | Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as p...展开 Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as press stability. It is suitable for use in pigment dispersions and concentrates, in offset inks and in gloss offset, quickset and sheet-fed applications. 收起 | |
| Uroset™ FGVC | Lawter | Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uro...展开 Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uroset™ FGVC is durable and has applications in offset inks, flush and pigment concentrates. 收起 | |
| Vinyl Acetate Monomer | Hainan Zhongxin Chemical Co., Ltd. | Vinyl Acetate Monomer, synonymous with 1-Acetoxyethylene (C4H6O2), is a clear liquid that is 99.5% pure. It is a copolymer used in the production of paints and coatings for dispersion purposes. | |
| Webvar™ 1126 | Lawter | Webvar™ 1126 is a heatset gel varnish displaying good transfer and lithographic performance, along with high gloss at all press speeds. It also has low misting and good water balance properties and is considered ideal for use in heatset inks. | |
| Webvar™ 1127 | Lawter | Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create bette...展开 Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create better gloss and transfer. Webvar™ 1127 is used in heatset inks and wetting varnishes. 收起 | |
| Zinc Borate | Hainan Zhongxin Chemical Co., Ltd. | Zinc Borate is a white or yellow powder that contains 37.0 - 40.0% Zno and 45-48% B2o3. It is primarily used as a flame retardant additive and can be used in multiple PVC applications for the production of paints, coatings, ceramic glaze, milk glass and d...展开 Zinc Borate is a white or yellow powder that contains 37.0 - 40.0% Zno and 45-48% B2o3. It is primarily used as a flame retardant additive and can be used in multiple PVC applications for the production of paints, coatings, ceramic glaze, milk glass and decorative papers, etc. This product can also be applied to other plastics such as Nylon, PE, PP etc. 收起 | |
| Zinc Chloride | Hainan Zhongxin Chemical Co., Ltd. | Zinc Chloride is a white crystalline powder that is made up of 98% ZnCL2. It is primarily used as a dehydrator, condensation agent, wood preservative, textile sizing agent and weighting agent. It has uses in multiple industries including battery producti...展开 Zinc Chloride is a white crystalline powder that is made up of 98% ZnCL2. It is primarily used as a dehydrator, condensation agent, wood preservative, textile sizing agent and weighting agent. It has uses in multiple industries including battery production, electroplate, paper making, medicine and active carbon manufacturing. 收起 | |
| Zinc Diethyl Dithiocarbamate | Hainan Zhongxin Chemical Co., Ltd. | Zinc Diethyl Dithiocarbamate, synonymous with ZDEC (ZDC,EZ) and Ethyl Ziram, is a white powder or granule use as an accelerator in the production of NR, SBR IIR or EPDM. It can also be used as an antioxidant additive for latex, natural rubbers, and rubbe...展开 Zinc Diethyl Dithiocarbamate, synonymous with ZDEC (ZDC,EZ) and Ethyl Ziram, is a white powder or granule use as an accelerator in the production of NR, SBR IIR or EPDM. It can also be used as an antioxidant additive for latex, natural rubbers, and rubber-based adhesives. 收起 | |
| Zinc Dimethyl Dithiocarbamate | Hainan Zhongxin Chemical Co., Ltd. | Zinc Dimethyl Dithiocarbamate ZDMC (PZ) is a white powder or granule that is primarily used as an accelerator used in the production of NR, SBR, IIR and EPDM. It is also used as an additive for natural or synthetic latex products. |
