| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 3132 SCARLET RED | Zhejiang Baihe Chemical Holding Group Company | 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks. | |
| BENZIDINE YELLOW 215 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起 | |
| BENZIDINE YELLOW 3025 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks. | |
| BENZIDINE YELLOW BHT | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks. | |
| BENZIDINE YELLOW OF-15 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC. | |
| BENZIDINE YELLOW OF-15B | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks. | |
| BENZIDINE YELLOW OF-15C | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起 | |
| BENZIDINE YELLOW PA-12 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起 | |
| BRILLIANT FAST RED 688 | Zhejiang Baihe Chemical Holding Group Company | BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks. | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| CYANINE BLUE 156 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint. | |
| CYANINE BLUE 191 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks. | |
| CYANINE BLUE 263 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC. | |
| CYANINE BLUE 952 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起 | |
| CYANINE GREEN 311 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起 | |
| CYANINE GREEN 312 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| DPP RED D20 | Zhejiang Baihe Chemical Holding Group Company | DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起 | |
| DPP RED DB | Zhejiang Baihe Chemical Holding Group Company | DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起 | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...展开 EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 收起 | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...展开 EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 收起 | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...展开 EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 收起 | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...展开 EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 收起 | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...展开 EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 收起 | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...展开 EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...展开 EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...展开 EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 收起 | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...展开 EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...展开 EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. 收起 | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....展开 EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...展开 EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...展开 EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...展开 EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. 收起 | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...展开 EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. 收起 | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...展开 EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. 收起 | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...展开 EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...展开 EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. 收起 | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...展开 EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. 收起 | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...展开 EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起 | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...展开 EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| FAST BRONZE VIOLET 159 | Zhejiang Baihe Chemical Holding Group Company | FAST BRONZE VIOLET 159 is a triarylcarbonium pigment with good performance and resistance. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for water based inks, textile printing, and offset inks. | |
| FAST ORANGE B-96 | Zhejiang Baihe Chemical Holding Group Company | FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks...展开 FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks. 收起 | |
| FAST RED A3B | Zhejiang Baihe Chemical Holding Group Company | FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, text...展开 FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, textile printing, and OEM paint. 收起 | |
| FAST SCARLET 259 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259 is a calcium salt 2B pigment with a bluish shade and moderate light fastness. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is suitable for industrial paint, powder coatings, and PVC. | |
| FAST SCARLET 259B | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259B is a calcium salt 2B pigment with a bluish shade and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA and PP inks as well as PVC. | |
| FAST SCARLET 2BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 2BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint and water based inks. | |
| FAST SCARLET 482 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 482 is a calcium salt 2B pigment with moderate light fastness and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA inks, PP inks, and PVC. | |
| FAST SCARLET 4BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based dec...展开 FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based decorative paint as well as PVC. 收起 | |
| FAST SCARLET BH-2BP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BP is a calcium salt 2B pigment with a bluish shade, good dispersability, and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BH-2BSP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BSP is a strontium salt 2B pigment with good dispersability and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BHXL | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH...展开 FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is often used in PA inks, NC inks, UV inks, and PP inks. 收起 | |
| FAST SCARLET GN | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GN is a bright yellow shaded red barium 2B pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is suitable for use in offset inks and PVC. | |
| FAST SCARLET GS | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GS is a strontium salt 2B pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is suitable for use in industrial paint, powder coatings, water based inks, and PVC. | |
| FAST SCARLET WI | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA...展开 FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA, and PP inks. 收起 | |
| FAST SCARLET WI-03 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA ...展开 FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA inks. 收起 | |
| HANSA YELLOW 103 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powd...展开 HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powder coatings. 收起 | |
| HANSA YELLOW 133 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder c...展开 HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder coatings. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| LITHOL RUBINE 188 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE 188 is a calcium salt of monoazo lake red pigment with good overall performance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks. |
