| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 3132 SCARLET RED | Zhejiang Baihe Chemical Holding Group Company | 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks. | |
| BENZIDINE YELLOW 215 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起 | |
| BENZIDINE YELLOW 3025 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks. | |
| BENZIDINE YELLOW BHT | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks. | |
| BENZIDINE YELLOW OF-15 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC. | |
| BENZIDINE YELLOW OF-15B | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks. | |
| BENZIDINE YELLOW OF-15C | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起 | |
| BENZIDINE YELLOW PA-12 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起 | |
| BRILLIANT FAST RED 688 | Zhejiang Baihe Chemical Holding Group Company | BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks. | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| CYANINE BLUE 156 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint. | |
| CYANINE BLUE 191 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks. | |
| CYANINE BLUE 263 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC. | |
| CYANINE BLUE 952 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起 | |
| CYANINE GREEN 311 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起 | |
| CYANINE GREEN 312 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| DPP RED D20 | Zhejiang Baihe Chemical Holding Group Company | DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起 | |
| DPP RED DB | Zhejiang Baihe Chemical Holding Group Company | DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| FAST BRONZE VIOLET 159 | Zhejiang Baihe Chemical Holding Group Company | FAST BRONZE VIOLET 159 is a triarylcarbonium pigment with good performance and resistance. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for water based inks, textile printing, and offset inks. | |
| FAST ORANGE B-96 | Zhejiang Baihe Chemical Holding Group Company | FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks...展开 FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks. 收起 | |
| FAST RED A3B | Zhejiang Baihe Chemical Holding Group Company | FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, text...展开 FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, textile printing, and OEM paint. 收起 | |
| FAST SCARLET 259 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259 is a calcium salt 2B pigment with a bluish shade and moderate light fastness. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is suitable for industrial paint, powder coatings, and PVC. | |
| FAST SCARLET 259B | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259B is a calcium salt 2B pigment with a bluish shade and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA and PP inks as well as PVC. | |
| FAST SCARLET 2BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 2BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint and water based inks. | |
| FAST SCARLET 482 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 482 is a calcium salt 2B pigment with moderate light fastness and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA inks, PP inks, and PVC. | |
| FAST SCARLET 4BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based dec...展开 FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based decorative paint as well as PVC. 收起 | |
| FAST SCARLET BH-2BP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BP is a calcium salt 2B pigment with a bluish shade, good dispersability, and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BH-2BSP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BSP is a strontium salt 2B pigment with good dispersability and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BHXL | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH...展开 FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is often used in PA inks, NC inks, UV inks, and PP inks. 收起 | |
| FAST SCARLET GN | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GN is a bright yellow shaded red barium 2B pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is suitable for use in offset inks and PVC. | |
| FAST SCARLET GS | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GS is a strontium salt 2B pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is suitable for use in industrial paint, powder coatings, water based inks, and PVC. | |
| FAST SCARLET WI | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA...展开 FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA, and PP inks. 收起 | |
| FAST SCARLET WI-03 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA ...展开 FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA inks. 收起 | |
| HANSA YELLOW 103 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powd...展开 HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powder coatings. 收起 | |
| HANSA YELLOW 133 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder c...展开 HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder coatings. 收起 | |
| High-Grade Anatase Titanium Dioxide FA-111 | Wuhan FangYuan Titanium Dioxide Industry Co., Ltd. | High-Grade Anatase Titanium Dioxide FA-111 is a titanium dioxide that has low oil absorption, strong hiding power, excellent dispersibility, and great stability. This product has a water dispersibility of 85% and a pH value of 6.5-8.5. It is commonly used...展开 High-Grade Anatase Titanium Dioxide FA-111 is a titanium dioxide that has low oil absorption, strong hiding power, excellent dispersibility, and great stability. This product has a water dispersibility of 85% and a pH value of 6.5-8.5. It is commonly used in coating applications. 收起 | |
| High-Grade Rutile Type Titanium Dioxide FR-767 | Wuhan FangYuan Titanium Dioxide Industry Co., Ltd. | High-Grade Rutile Type Titanium Dioxide FR-767 is a small particle size titanium dioxide with a blue undertone created through a sulfuric acid process. This product has a dispersibility of 5.75 and a pH value of 6.5-8.5, and is used in indoor and outdoor ...展开 High-Grade Rutile Type Titanium Dioxide FR-767 is a small particle size titanium dioxide with a blue undertone created through a sulfuric acid process. This product has a dispersibility of 5.75 and a pH value of 6.5-8.5, and is used in indoor and outdoor coatings, and powder coatings. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| LITHOL RUBINE 188 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE 188 is a calcium salt of monoazo lake red pigment with good overall performance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks. | |
| LITHOL RUBINE 188A | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE 188A is a calcium salt of monoazo lake red pigment designed for water based inks. It exhibits high color strength, high gloss and transparency. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for ...展开 LITHOL RUBINE 188A is a calcium salt of monoazo lake red pigment designed for water based inks. It exhibits high color strength, high gloss and transparency. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks and NC inks. 收起 | |
| LITHOL RUBINE 2062 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE 2062 is a calcium salt of monoazo lake red pigment with a bluish shade. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks. | |
| LITHOL RUBINE 298A | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE 298A is a calcium salt of monoazo lake red pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks and PVC. | |
| LITHOL RUBINE BH-07 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-07 is a red pigment with good performance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint and PU. | |
| LITHOL RUBINE BH-300 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-300 is a calcium salt of monoazo lake red pigment with good overall performance in solvent based inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in toluene based inks, industrial...展开 LITHOL RUBINE BH-300 is a calcium salt of monoazo lake red pigment with good overall performance in solvent based inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in toluene based inks, industrial paint, offset inks, and PP inks. 收起 | |
| LITHOL RUBINE BH-300A | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-300A is a calcium salt of monoazo lake red pigment with good performance in solvent based inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PA inks, PP inks, NC inks, and toluene based ...展开 LITHOL RUBINE BH-300A is a calcium salt of monoazo lake red pigment with good performance in solvent based inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PA inks, PP inks, NC inks, and toluene based inks. 收起 | |
| LITHOL RUBINE BH-461 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-461 is a calcium salt of monoazo lake red pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in toluene based inks and offset inks. | |
| LITHOL RUBINE BH-468 | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-468 is a calcium salt of monoazo lake red pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in toluene based inks and offset inks. | |
| LITHOL RUBINE BH-4BP | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BH-4BP is a calcium salt of monoazo lake red pigment with good dispersion and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for powder coatings, PVC, and industrial paint. | |
| LITHOL RUBINE BHA | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHA is a calcium salt of monoazo lake red pigment with a yellow tint. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks, UV inks, and toluene based inks. | |
| LITHOL RUBINE BHB | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHB is a calcium salt of monoazo lake red pigment with a yellow tint. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in NC inks, PP, and UV inks. | |
| LITHOL RUBINE BHD | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHD is a calcium salt of monoazo lake red pigment with a yellow tint. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks, UV inks, and PVC. | |
| LITHOL RUBINE BHE | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHE is a calcium salt of monoazo lake red pigment with good performance in offset inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for offset inks and UV inks. | |
| LITHOL RUBINE BHGL | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHGL is a calcium salt of monoazo lake red pigment with a bluish tint. It exhibits high transparency and gloss, and has good resistance to solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended...展开 LITHOL RUBINE BHGL is a calcium salt of monoazo lake red pigment with a bluish tint. It exhibits high transparency and gloss, and has good resistance to solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in PA, NC, UV inks, PP and toluene-based inks. 收起 | |
| LITHOL RUBINE BHH | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHH is a calcium salt of monoazo lake red pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks, UV inks, and powder coatings. | |
| LITHOL RUBINE BHMB | Zhejiang Baihe Chemical Holding Group Company | LITHOL RUBINE BHMB is a calcium salt of monoazo lake red pigment with a bluish tint. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for use in offset inks, UV inks, and toluene based inks. |
