| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 3132 SCARLET RED | Zhejiang Baihe Chemical Holding Group Company | 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks. | |
| A-C 316A | DKSH | A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including ...展开 A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 325 | DKSH | A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...展开 A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6 | DKSH | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as...展开 A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617 | DKSH | A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used ...展开 A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617A | DKSH | A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also u...展开 A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629 | DKSH | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous appli...展开 A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629A | DKSH | A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can al...展开 A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6A | DKSH | A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also use...展开 A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...展开 AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ACQUAMINE PD 1419_7 | DKSH | ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. | Request Sample |
| ACQUAMINE PD 2157_2 | DKSH | ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life. | Request Sample |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ALU D10011 | DKSH | ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, ...展开 ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10017 | DKSH | ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, cre...展开 ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10028 | DKSH | ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes...展开 ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D2034 | DKSH | ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effe...展开 ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU F4016 | DKSH | ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection...展开 ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| AMPARMOR 1043 | DKSH | AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...展开 AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...展开 The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...展开 The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 4010 | DKSH | The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...展开 The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AOX52 | DKSH | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to ...展开 AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA. 收起 | Request Sample |
| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...展开 ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. 收起 | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...展开 ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| BENZIDINE YELLOW 215 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起 | |
| BENZIDINE YELLOW 3025 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks. | |
| BENZIDINE YELLOW BHT | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks. | |
| BENZIDINE YELLOW OF-15 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC. | |
| BENZIDINE YELLOW OF-15B | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks. | |
| BENZIDINE YELLOW OF-15C | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起 | |
| BENZIDINE YELLOW PA-12 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起 | |
| BRILLIANT FAST RED 688 | Zhejiang Baihe Chemical Holding Group Company | BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks. | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...展开 Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. 收起 | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| CD 1525 WH-4 | DKSH | CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line ...展开 CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems.Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CD 3008 WH-4 | DKSH | CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed...展开 CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems. Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| CYANINE BLUE 156 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint. | |
| CYANINE BLUE 191 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks. | |
| CYANINE BLUE 263 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC. | |
| CYANINE BLUE 952 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起 | |
| CYANINE GREEN 311 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起 | |
| CYANINE GREEN 312 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...展开 DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. 收起 | |
| Di Isopropyl Ether | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Di Isopropyl Ether is an organic compound with the formula C6H14O. It has multiple applications for use in the production of solvents used in paints, waxes, dyes and resins such as paint thinners and stain removers. | |
| Dimethyl Carbonate | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Dimethyl Carbonate is an organic compound with the formula C3H6O3. It has multiple applications for use in the production of; polycarbonates, pharmaceutical and pesticide, lithium battery electrolytes and as a solvent in paints, coatings and adhesives. | |
| DMBA | DKSH | DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available ...展开 DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available in Asia Pacific and Europe. 收起 | Request Sample |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...展开 DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. 收起 | |
| DPP RED D20 | Zhejiang Baihe Chemical Holding Group Company | DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起 | |
| DPP RED DB | Zhejiang Baihe Chemical Holding Group Company | DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. |
