| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...展开 ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. 收起 | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...展开 ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...展开 Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. 收起 | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...展开 DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. 收起 | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...展开 DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| KA-552 | Keeneyes International Co., Ltd. | KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free...展开 KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free based exterior durable powder coatings. Its characteristics include low toxicity, non-irritating to skin, and good weather durability. 收起 | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...展开 KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. 收起 | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...展开 KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. 收起 | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7111 | Keeneyes International Co., Ltd. | KA-7111 is a special matting powder which is used in PU semi-gloss coatings for artificial leather. It has many beneficial properties, such as good transparency, good dispersibility, high matting effect, and good hand feel and smoothness. | |
| KA-7302 | Keeneyes International Co., Ltd. | KA-7302 is a matting powder for PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-7502 | Keeneyes International Co., Ltd. | KA-7502 is a matting agent intended for sealants and plastics. It has an excellent matting/flatting effect, and can meet such special requirements like transparency and dispersibility. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-B | Keeneyes International Co., Ltd. | KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-C | Keeneyes International Co., Ltd. | KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D4 | Keeneyes International Co., Ltd. | KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive...展开 KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D40 | Keeneyes International Co., Ltd. | KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductiv...展开 KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-P | Keeneyes International Co., Ltd. | KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conduc...展开 KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-T11 | Keeneyes International Co., Ltd. | KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KA-W1 | Keeneyes International Co., Ltd. | KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free condu...展开 KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-W11 | Keeneyes International Co., Ltd. | KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| MDATP-1W | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...展开 MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| MDATP-2SW | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...展开 MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...展开 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...展开 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...展开 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 收起 | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...展开 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 收起 | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...展开 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...展开 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 收起 | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...展开 Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展开 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展开 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...展开 Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TGIC | Keeneyes International Co., Ltd. | TGIC (Triglycidyl Isocyanurate) is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion, and excellent high temperature stability. This product is mainly used as a curing agent, insulating lamin...展开 TGIC (Triglycidyl Isocyanurate) is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion, and excellent high temperature stability. This product is mainly used as a curing agent, insulating laminate sheet, adhesive, and plastic stabilizer. 收起 | |
| TOYNOL® CATB-61 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-61, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 150-151℃. | |
| TOYNOL® CATB-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-72, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 170-172℃. | |
| TOYNOL® D-504 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital print...展开 TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® DF-110B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-220 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展开 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220M | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展开 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展开 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-58 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active ...展开 TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-58S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active...展开 TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-59 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and pa...展开 TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and paper coatings. This product is dispersible in water. 收起 | |
| TOYNOL® DF-62 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% act...展开 TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% active content. 收起 | |
| TOYNOL® DF-63 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% act...展开 TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-64 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It con...展开 TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-66 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% act...展开 TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% active content. 收起 | |
| TOYNOL® DF-68 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% act...展开 TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% active content. 收起 | |
| TOYNOL® DF-70 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-80B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-80D | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80L | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 20% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 |
