| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 3132 SCARLET RED | Zhejiang Baihe Chemical Holding Group Company | 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks. | |
| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...展开 ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. 收起 | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...展开 ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| BENZIDINE YELLOW 215 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起 | |
| BENZIDINE YELLOW 3025 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks. | |
| BENZIDINE YELLOW BHT | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks. | |
| BENZIDINE YELLOW OF-15 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC. | |
| BENZIDINE YELLOW OF-15B | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks. | |
| BENZIDINE YELLOW OF-15C | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起 | |
| BENZIDINE YELLOW PA-12 | Zhejiang Baihe Chemical Holding Group Company | BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起 | |
| BRILLIANT FAST RED 688 | Zhejiang Baihe Chemical Holding Group Company | BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks. | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...展开 Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. 收起 | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| CYANINE BLUE 156 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint. | |
| CYANINE BLUE 191 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks. | |
| CYANINE BLUE 263 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC. | |
| CYANINE BLUE 952 | Zhejiang Baihe Chemical Holding Group Company | CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起 | |
| CYANINE GREEN 311 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起 | |
| CYANINE GREEN 312 | Zhejiang Baihe Chemical Holding Group Company | CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...展开 DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. 收起 | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...展开 DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. 收起 | |
| DPP RED D20 | Zhejiang Baihe Chemical Holding Group Company | DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起 | |
| DPP RED DB | Zhejiang Baihe Chemical Holding Group Company | DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| Exilva® F 01-L | Borregaard ChemCell | Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| Exilva® F 01-V | Borregaard ChemCell | Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| Exilva® P 01-L | Borregaard ChemCell | Exilva® P 01-L is a microfibrillated cellulose. | |
| Exilva® P 01-V | Borregaard ChemCell | Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| FAST BRONZE VIOLET 159 | Zhejiang Baihe Chemical Holding Group Company | FAST BRONZE VIOLET 159 is a triarylcarbonium pigment with good performance and resistance. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for water based inks, textile printing, and offset inks. | |
| FAST ORANGE B-96 | Zhejiang Baihe Chemical Holding Group Company | FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks...展开 FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks. 收起 | |
| FAST RED A3B | Zhejiang Baihe Chemical Holding Group Company | FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, text...展开 FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, textile printing, and OEM paint. 收起 | |
| FAST SCARLET 259 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259 is a calcium salt 2B pigment with a bluish shade and moderate light fastness. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is suitable for industrial paint, powder coatings, and PVC. | |
| FAST SCARLET 259B | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 259B is a calcium salt 2B pigment with a bluish shade and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA and PP inks as well as PVC. | |
| FAST SCARLET 2BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 2BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint and water based inks. | |
| FAST SCARLET 482 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 482 is a calcium salt 2B pigment with moderate light fastness and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA inks, PP inks, and PVC. | |
| FAST SCARLET 4BM | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based dec...展开 FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based decorative paint as well as PVC. 收起 | |
| FAST SCARLET BH-2BP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BP is a calcium salt 2B pigment with a bluish shade, good dispersability, and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BH-2BSP | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BH-2BSP is a strontium salt 2B pigment with good dispersability and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PVC, PO, and powder coatings. | |
| FAST SCARLET BHXL | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH...展开 FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is often used in PA inks, NC inks, UV inks, and PP inks. 收起 | |
| FAST SCARLET GN | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GN is a bright yellow shaded red barium 2B pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is suitable for use in offset inks and PVC. | |
| FAST SCARLET GS | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET GS is a strontium salt 2B pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is suitable for use in industrial paint, powder coatings, water based inks, and PVC. | |
| FAST SCARLET WI | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA...展开 FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA, and PP inks. 收起 | |
| FAST SCARLET WI-03 | Zhejiang Baihe Chemical Holding Group Company | FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA ...展开 FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA inks. 收起 | |
| HANSA YELLOW 103 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powd...展开 HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powder coatings. 收起 | |
| HANSA YELLOW 133 | Zhejiang Baihe Chemical Holding Group Company | HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder c...展开 HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder coatings. 收起 | |
| KA-101 | Keeneyes International Co., Ltd. | KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparati...展开 KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-105 | Keeneyes International Co., Ltd. | KA-105 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-120 | Keeneyes International Co., Ltd. | KA-120 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-552 | Keeneyes International Co., Ltd. | KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free...展开 KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free based exterior durable powder coatings. Its characteristics include low toxicity, non-irritating to skin, and good weather durability. 收起 | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...展开 KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. 收起 | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...展开 KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. 收起 | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7111 | Keeneyes International Co., Ltd. | KA-7111 is a special matting powder which is used in PU semi-gloss coatings for artificial leather. It has many beneficial properties, such as good transparency, good dispersibility, high matting effect, and good hand feel and smoothness. | |
| KA-7302 | Keeneyes International Co., Ltd. | KA-7302 is a matting powder for PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-7502 | Keeneyes International Co., Ltd. | KA-7502 is a matting agent intended for sealants and plastics. It has an excellent matting/flatting effect, and can meet such special requirements like transparency and dispersibility. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-81 | Keeneyes International Co., Ltd. | KA-81 is a decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-81F | Keeneyes International Co., Ltd. | KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal...展开 KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81S | Keeneyes International Co., Ltd. | KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of univers...展开 KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81U | Keeneyes International Co., Ltd. | KA-81U is a decolored aldehyde resin that can be applied in UV ink. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-B | Keeneyes International Co., Ltd. | KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-C | Keeneyes International Co., Ltd. | KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D4 | Keeneyes International Co., Ltd. | KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive...展开 KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D40 | Keeneyes International Co., Ltd. | KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductiv...展开 KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-P | Keeneyes International Co., Ltd. | KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conduc...展开 KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-PE-27 | Keeneyes International Co., Ltd. | KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to ...展开 KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to enforce the property of coating film. With a proper catalyst, this product can improve the adhesion property between metal and plastic material. 收起 | |
| KA-T11 | Keeneyes International Co., Ltd. | KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KA-W1 | Keeneyes International Co., Ltd. | KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free condu...展开 KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-W11 | Keeneyes International Co., Ltd. | KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KAE-14 | Keeneyes International Co., Ltd. | KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high...展开 KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high peeling strength. 收起 |
