| AEPD™ VOX 1000 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。 | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起 | |
| ALKATERGE®-T Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起 | |
| AMP™-75 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起 | |
| AMP™-90 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。 | |
| AMP™-95 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。 | |
| DMAMP-80™ Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。 | |
| FLEXITANE™ CA 6000 Specialty Coating Additive | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案 | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| ZOLDINE™ MS-PLUS Moisture Scavenger | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ZOLDINE™ MS-PLUS Moisture Scavenger is a fast-reacting, low viscosity oxazolidine-based moisture scavenger for use in urethane coatings, sealants and elastomers. ZOLDINE™ MS-PLUS Moisture Scavenger will safely and effectively eliminate moisture from the r...展开 ZOLDINE™ MS-PLUS Moisture Scavenger is a fast-reacting, low viscosity oxazolidine-based moisture scavenger for use in urethane coatings, sealants and elastomers. ZOLDINE™ MS-PLUS Moisture Scavenger will safely and effectively eliminate moisture from the raw materials found in most urethane systems. It also eliminates problems caused by humidity during the cast or spray application of two-component urethane systems. The following benefits are obtained when using ZOLDINE™ MS-PLUS Moisture Scavenger minimizes downglossing and hazing under high humidity application conditions, eliminates CO2 bubbles and pinholes in two component systems, improves film integrity and substrate adhesion, improves gloss, abrasion resistance and chemical resistance, prevents gassing and gelling in IPDI-based one-component (1k) moisture-cure systems, forms no insoluble precipitates upon reaction with moisture or isocyanates, fully reacts into urethane polymer matrix, and excellent handling properties. 收起 | |
| ZOLDINE™ XL-29SE | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ZOLDINE™ XL-29SE交联剂是一支聚碳化二亚胺类的专利产品，用作双组分羧基官能团的皮革涂饰产品的交联剂。这些涂饰产品一般都是聚氨酯类分散体或者聚丙烯酸类。ZOLDINE XL-29SE是高档皮革如汽车皮革的绝佳选择。它同时适用于含铬及不含铬的皮革产品。ZOLDINE XL-29SE可单独使用，也可与其它类型的交联剂如异氰酸酯类联合使用以达到最佳的性价比。 产品的主要性能优势包括： • 减少粘连 • 增强耐磨性能 • 氮丙啶理想的环保替代品 • 交联无副产物 |
