UL Prospector

成功!

成功保存搜索结果
20° Bé Muriatic Acid (HCl) - Technical Grade Occidental Chemical Corp. (OxyChem) 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起
22° Bé Muriatic Acid (HCl) - Technical Grade Occidental Chemical Corp. (OxyChem) 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起
3132 SCARLET RED Zhejiang Baihe Chemical Holding Group Company 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks.
Request Sample AMICURE® DBU-E Evonik Resource Efficiency GmbH, BL Crosslinkers High-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders.
Request Sample AMICURE® UR2T Evonik Resource Efficiency GmbH, BL Crosslinkers Substitute for chlorophenyl ureas; co-curing accelerator for dicyandiamide-cured epoxy resins. Faster green strength adhesion build. Used in one-component paste and film adhesives, high-performance composites, and prepregs.
Request Sample ANCAMIDE 221-X70® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE 221® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE® 220-IPA-73 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete.
Request Sample ANCAMIDE® 220-X-70 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete.
Request Sample ANCAMIDE® 400 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起
Request Sample ANCAMINE® 2489 CURING AGENT Evonik Resource Efficiency GmbH, BL Crosslinkers 改性脂环族胺,浅色、粘度低。允许更高的填料使用量或降低对稀释剂的需求量。可提供非常快速的固化和高光泽以及抗发白性能
Request Sample ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起
Request Sample Amicure® CG-325G Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this produc...展开 Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component adhesives, recreational and industrial pre-preg composites, and powder coatings. 收起
Request Sample Amicure® CG-325G Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins.
Request Sample Amicure® IC-221 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...展开 Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. 收起
Request Sample Amicure® IC-321 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...展开 Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. 收起
Request Sample Amicure® IC133 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC133 is a polycarbamide curing agent for DTM C3 coatings. It is slower-curing compared to Amicure® IC166. This product is ideal for plural component spray systems.
Request Sample Amicure® IC166 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems.
Request Sample Amicure® UR7/10 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...展开 Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. 收起
Request Sample Ancamide 2634™ Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性聚酰胺,设计用于双组分溶剂型环氧涂料,其中高性能和低成本是主要要求
Request Sample Ancamide® 2050 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,具有高光泽、柔韧、坚硬和抗反冲击性能。无需诱导。适用于高固体份涂料和底漆、混凝土涂料、密封剂和腻子以及泳池漆
Request Sample Ancamide® 220 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings.
Request Sample Ancamide® 2353 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,可形成出色的高光泽涂膜,快干,无诱导时间。涂膜硬而且具有非常好的耐溶剂和耐腐蚀性能。具有聚酰胺最佳的耐化学品性能
Request Sample Ancamide® 2396 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性酰胺胺,可在室温下与液体环氧树脂反应
Request Sample Ancamide® 2426 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 不含增塑剂的酰胺胺,具有长开罐使用时间和出色的抗发白性能,出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆
Request Sample Ancamide® 2445 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 低粘度聚酰胺,可在低温下快速固化。低胺残留量。具有高光泽、出色的硬度和柔韧性
Request Sample Ancamide® 2652 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology.
Request Sample Ancamide® 2769 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...展开 Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. 收起
Request Sample Ancamide® 350A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...展开 Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. 收起
Request Sample Ancamide® 351A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...展开 Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample Ancamide® 375A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE™ 350A的更低粘度版本,是一种标准型高咪唑啉含量聚酰胺。适用于低VOC涂料、混凝土修补和薄泥浆以及胶粘剂
Request Sample Ancamide® 512 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起
Request Sample Ancamide® 910 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起
Request Sample Ancamine® 1618 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make ...展开 Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make it ideal for formulating floorings, maintenance coatings, tank linings, and secondary containment linings. Its very low colour and good colour stability make it appropriate for clear and pastel shade coatings. 收起
Request Sample Ancamine® 2014AS Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-compon...展开 Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起
Request Sample Ancamine® 2334 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...展开 Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. 收起
Request Sample Ancamine® 2337S Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起
Request Sample Ancamine® 2712 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...展开 Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2712 M Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2726 Curative Video Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leve...展开 Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leveling flooring. 收起
Request Sample Ancamine® 2735 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resist...展开 Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resistance, low color, fast cure speed and hardness build at ambient and low temperature, low viscosity, very good chemical and mechanical resistance and good carbamation resistance Ancamine® 2735 applications may include industrial and decorative self leveling flooring, high solids and solvent free coatings. 收起
Request Sample Ancamine® 2739 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...展开 Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. 收起
Request Sample Ancamine® 2748 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents...展开 Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents in markets including waste water, secondary containment, flooring, tank coatings and other demanding applications. 收起
Request Sample Ancamine® 2749 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C.
Request Sample Ancamine® 2759 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...展开 Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. 收起
Request Sample Ancamine® 2765 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...展开 Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. 收起
Request Sample Ancamine® 2800 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...展开 Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. 收起
Request Sample Ancamine® 2908A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...展开 Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. 收起
Request Sample Ancamine™ 2264 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...展开 Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. 收起
Request Sample Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...展开 Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. 收起
Request Sample Anquamine® 287 Waterborne Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...展开 Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. 收起
Request Sample Anquamine® 401 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快速干燥时间,以及出色的硬度和良好的防腐蚀性能。可为高光泽涂膜提供出色的保光性
Request Sample Anquamine® 419 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快干时间和出色的耐腐蚀和耐湿性,良好的光泽和保光性,以及对钢基材出色的附着力
Request Sample Anquamine® 721 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....展开 Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. 收起
Request Sample Anquamine® 731 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...展开 Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. 收起
Request Sample Anquamine® 735 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...展开 Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. 收起
Request Sample Anquawhite™ 100 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VO...展开 Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VOC levels < 100 g/l. It can also be formulated to high solids while maintaining low viscosity. Formulations based on Anquawhite™ 100 curing agent and Ancarez™ AR 550 epoxy resin offer long pot life, fast dry, high gloss, and high water resistance at low VOC. Anquawhite™ 100 curing agent formulations also offer low yellowing, good acid and food stain resistance, and good water resistance. 收起
BENZIDINE YELLOW 215 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起
BENZIDINE YELLOW 3025 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks.
BENZIDINE YELLOW BHT Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks.
BENZIDINE YELLOW OF-15 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC.
BENZIDINE YELLOW OF-15B Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks.
BENZIDINE YELLOW OF-15C Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起
BENZIDINE YELLOW PA-12 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起
BRILLIANT FAST RED 688 Zhejiang Baihe Chemical Holding Group Company BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks.
CYANINE BLUE 156 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint.
CYANINE BLUE 191 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks.
CYANINE BLUE 263 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC.
CYANINE BLUE 952 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起
CYANINE GREEN 311 Zhejiang Baihe Chemical Holding Group Company CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起
CYANINE GREEN 312 Zhejiang Baihe Chemical Holding Group Company CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起
Carbon Tetrachloride Occidental Chemical Corp. (OxyChem) Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起
Caustic Potash 45% Membrane Occidental Chemical Corp. (OxyChem) Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起
Caustic Potash 50% Membrane Occidental Chemical Corp. (OxyChem) Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起
Caustic Potash Crystal Occidental Chemical Corp. (OxyChem) Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起
Caustic Potash Flake Occidental Chemical Corp. (OxyChem) Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起
Caustic Soda 50% Liquid Diaphragm Occidental Chemical Corp. (OxyChem) Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起
Caustic Soda 50% Liquid Diaphragm - West Coast Occidental Chemical Corp. (OxyChem) Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起
Caustic Soda 50% Liquid Membrane Occidental Chemical Corp. (OxyChem) Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起
Caustic Soda 50% Liquid Membrane - West Coast Occidental Chemical Corp. (OxyChem) Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起
Caustic Soda 50% Liquid Membrane Blended Occidental Chemical Corp. (OxyChem) Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起
Chloroform – Alcohol Stabilized Grade Occidental Chemical Corp. (OxyChem) Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起
Chloroform – Fluorocarbon Grade Occidental Chemical Corp. (OxyChem) Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起
Chloroform – Technical Grade Occidental Chemical Corp. (OxyChem) Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起
DPP RED D20 Zhejiang Baihe Chemical Holding Group Company DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起
DPP RED DB Zhejiang Baihe Chemical Holding Group Company DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起
Dechlorane Plus 25 Occidental Chemical Corp. (OxyChem) Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起
Dechlorane Plus 35 Occidental Chemical Corp. (OxyChem) Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起
Dechlorane Plus 515 Occidental Chemical Corp. (OxyChem) Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起
Request Sample EPODIL® 742 Evonik Resource Efficiency GmbH, BL Crosslinkers An epoxy resin system modifier.
Request Sample EPODIL® 747 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...展开 EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. 收起
Request Sample EPODIL® 757 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...展开 EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. 收起
Request Sample EPODIL® 759 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起
Request Sample Epilink™ 360 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...展开 Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. 收起
Request Sample Epodil® 748 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low l...展开 Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low level of volatility and ability to reduce the surface tension of epoxy resins make this product a general purpose diluent. 收起
Request Sample Epodil® 749 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This prod...展开 Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This product is applied in laminates, flooring and motars, and potting and encapsulation. 收起
Ethylene Dichloride - Finished Grade Occidental Chemical Corp. (OxyChem) Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起
Ethylene Dichloride – Technical Grade (Geismar) Occidental Chemical Corp. (OxyChem) Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起
FAST BRONZE VIOLET 159 Zhejiang Baihe Chemical Holding Group Company FAST BRONZE VIOLET 159 is a triarylcarbonium pigment with good performance and resistance. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for water based inks, textile printing, and offset inks.
FAST ORANGE B-96 Zhejiang Baihe Chemical Holding Group Company FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks...展开 FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks. 收起