| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Black Manganese NB-2 | Changzhou Huazhu Pigment Co., Ltd. | Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and cerami...展开 Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Cobalt Blue PB28 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Cobalt Blue PB36 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Copper Chrome Black NB-1 | Changzhou Huazhu Pigment Co., Ltd. | Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ce...展开 Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Crystal Blue HE-765 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-745 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-785 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-741 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-781 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-746 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-766 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-786 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-743 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-763 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-783 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-740 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-780 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HE-764 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-744 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-784 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| DA-1 | Changzhou Huazhu Pigment Co., Ltd. | DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing i...展开 DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-1 | Changzhou Huazhu Pigment Co., Ltd. | DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-2 | Changzhou Huazhu Pigment Co., Ltd. | DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Golden H-231 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coating...展开 Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-232 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and...展开 Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-233 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-234 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-236 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings ...展开 Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-250 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-251 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展开 Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-252 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-270 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-271 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展开 Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-272 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| HZ-323G | Changzhou Huazhu Pigment Co., Ltd. | HZ-323G is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with an apple green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is ...展开 HZ-323G is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with an apple green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-401 | Changzhou Huazhu Pigment Co., Ltd. | HZ-401 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suita...展开 HZ-401 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-402 | Changzhou Huazhu Pigment Co., Ltd. | HZ-402 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suit...展开 HZ-402 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-403 | Changzhou Huazhu Pigment Co., Ltd. | HZ-403 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also sui...展开 HZ-403 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-404 | Changzhou Huazhu Pigment Co., Ltd. | HZ-404 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also su...展开 HZ-404 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-406 | Changzhou Huazhu Pigment Co., Ltd. | HZ-406 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a silver gray coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is al...展开 HZ-406 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a silver gray coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-407 | Changzhou Huazhu Pigment Co., Ltd. | HZ-407 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a black coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also sui...展开 HZ-407 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a black coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-408 | Changzhou Huazhu Pigment Co., Ltd. | HZ-408 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a brown copper coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is a...展开 HZ-408 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a brown copper coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-421 | Changzhou Huazhu Pigment Co., Ltd. | HZ-421 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a rich red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also ...展开 HZ-421 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a rich red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-422 | Changzhou Huazhu Pigment Co., Ltd. | HZ-422 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a rich blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also...展开 HZ-422 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a rich blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-423 | Changzhou Huazhu Pigment Co., Ltd. | HZ-423 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a grass green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is al...展开 HZ-423 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a grass green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-424Y | Changzhou Huazhu Pigment Co., Ltd. | HZ-424Y is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a pearl purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is ...展开 HZ-424Y is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a pearl purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-425 | Changzhou Huazhu Pigment Co., Ltd. | HZ-425 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a lemon coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also sui...展开 HZ-425 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a lemon coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Metallic Color F-320 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-320 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other coat...展开 Metallic Color F-320 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-322 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-322 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other coat...展开 Metallic Color F-322 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-324 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-324 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and other ...展开 Metallic Color F-324 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-350 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-350 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other coa...展开 Metallic Color F-350 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-352 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-352 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other coa...展开 Metallic Color F-352 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-356 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-356 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a mauve luster effect. It can be used for vehicle, architectural, powder and other coat...展开 Metallic Color F-356 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a mauve luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-360 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-360 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other co...展开 Metallic Color F-360 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a bronze luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-362 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-362 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other co...展开 Metallic Color F-362 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a copper luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Metallic Color F-364 | Changzhou Huazhu Pigment Co., Ltd. | Metallic Color F-364 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and othe...展开 Metallic Color F-364 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Pearl B-010 | Changzhou Huazhu Pigment Co., Ltd. | Pearl B-010 is a synthetic pearlescent pigment, coated with anatase TiO2. It has a range of particle sizes from 10 to 60 microns, with a brilliant luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also ...展开 Pearl B-010 is a synthetic pearlescent pigment, coated with anatase TiO2. It has a range of particle sizes from 10 to 60 microns, with a brilliant luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Pearl F-354 | Changzhou Huazhu Pigment Co., Ltd. | Pearl F-354 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Pearl F-354 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a claret-red luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Pearl H-230 | Changzhou Huazhu Pigment Co., Ltd. | Pearl H-230 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and...展开 Pearl H-230 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 |
