| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ DP1600 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its ...展开 Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 80%. 收起 | |
| Greesol™ DPB | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DPB is a non-ionic class wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has a Low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 100% | |
| Greesol™ E20 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This p...展开 Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E65 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. T...展开 Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can also be use as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ E85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a elect...展开 Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...展开 Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ F07 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterb...展开 Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ FS85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suit...展开 Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suitable for use in commercial printing presses, and been shown to be effective in clear edge of printing dots and does not cause excessive ink emulsion in ink jet inks. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 | |
| POL-2322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起 | |
| POL-2325 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起 | |
| POL-2328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起 | |
| POL-2338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-2345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 2500 and a Hydroxyl Value of 42-48 mgKOH/g. 收起 | |
| POL-2356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000 which can be adjusted as needed. 收起 | |
| POL-2365 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 63-67 mgKOH/g and a Molecular Weight of 1700 which can be adjusted as needed. 收起 | |
| POL-2375 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a a Molecular Weight of 1500 and a Viscosity of 1000cps @ 60°C. 收起 | |
| POL-238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase...展开 POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 3000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-2428 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 26-30 mgKOH/g and a Molecular Weight of 4000. 收起 | |
| POL-2456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 2000 and a Viscosity of 1500 cps @ 60°C. 收起 | |
| POL-2466 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1700 and a Viscosity of 2000 cps @ 60°C. 收起 | |
| POL-2476 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1500 and a Hydroxyl Value of 71-79 mgKOH/g. 收起 | |
| POL-2500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-256 | Qingdao Xinyutian Chemical Co., Ltd. | POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase...展开 POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 2000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-25722 | Qingdao Xinyutian Chemical Co., Ltd. | POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. ...展开 POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 5000 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-265 | Qingdao Xinyutian Chemical Co., Ltd. | POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer...展开 POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and an Acidic Value the is <1.5 mgKOH/g. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 10000 and a Hydroxyl Value of 10-12 mgKOH/g. 收起 | |
| POL-3112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing f...展开 POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 1000 and a Viscosity of 380 cps @ 60°C. 收起 | |
| POL-3195 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increa...展开 POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 600 and a Viscosity of 250 cps @ 60°C. 收起 | |
| POL-322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 5000 and a Hydroxyl Value of 20-24 mgKOH/g. 收起 | |
| POL-328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Molecular Weight of 4000 and a Hydroxyl Value of 26-30 mgKOH/g. 收起 | |
| POL-338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 35-41 mgKOH/g and a Viscosity of 2400 cps @ 60°C. 收起 | |
| POL-345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 42-48 mgKOH/g and a Molecular Weight of 2500. 收起 | |
| POL-3538 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing fo...展开 POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 2000 and a Viscosity of 1300 cps @ 60°C. 收起 | |
| POL-456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resist...展开 POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 2000 and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and a Water Value that is <0.03%. 收起 |
