Benox® A-70 | UNITED INITIATORS GMBH & CO KG | Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
Benox® A-75 | UNITED INITIATORS GMBH & CO KG | Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
Benox® A-80 | UNITED INITIATORS GMBH & CO KG | Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
Benox® B-50 | UNITED INITIATORS GMBH & CO KG | Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...展开 Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...展开 Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...展开 Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...展开 Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展开 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...展开 Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...展开 Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
Benox® C-50S | UNITED INITIATORS GMBH & CO KG | Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in bot...展开 Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in both ambient temperature and elevated temperature cure processes, in combination with amine accelerators. Benox® C-50S dissolves fast in acrylic resins and unsaturated polyester and is easy to disperse. 收起 | |
Benox® L-40LV | UNITED INITIATORS GMBH & CO KG | Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure...展开 Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure of road marking paints based on acrylic resins. 收起 | |
BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂,可用于需要高溶解性的应用场合 | |
Curox® I-200 | UNITED INITIATORS GMBH & CO KG | Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
Curox® I-300 | UNITED INITIATORS GMBH & CO KG | Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
Curox® M-100 | UNITED INITIATORS GMBH & CO KG | Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-102 | UNITED INITIATORS GMBH & CO KG | Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-103 | UNITED INITIATORS GMBH & CO KG | Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-104 | UNITED INITIATORS GMBH & CO KG | Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-180 | UNITED INITIATORS GMBH & CO KG | Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...展开 Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
Curox® M-200 | UNITED INITIATORS GMBH & CO KG | Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-202 | UNITED INITIATORS GMBH & CO KG | Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-300 | UNITED INITIATORS GMBH & CO KG | Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-302 | UNITED INITIATORS GMBH & CO KG | Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-302R | UNITED INITIATORS GMBH & CO KG | Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-303 | UNITED INITIATORS GMBH & CO KG | Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-303R | UNITED INITIATORS GMBH & CO KG | Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...展开 Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-312 | UNITED INITIATORS GMBH & CO KG | Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-312R | UNITED INITIATORS GMBH & CO KG | Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-340 | UNITED INITIATORS GMBH & CO KG | Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® M-403 | UNITED INITIATORS GMBH & CO KG | Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
Curox® MCH | UNITED INITIATORS GMBH & CO KG | Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...展开 Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
Curox® VP-160A | UNITED INITIATORS GMBH & CO KG | Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins...展开 Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins, coatings, and Novolac resins at ambient temperature. 收起 | |
D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
Ferrous Sulphate Heptahydrate | Ningbo Xinfu Titanium Dioxide Co., Ltd. | Ferrous Sulphate Heptahydrate appears as green crystal grains. This product has a TiO2 content of 0.5% and is often used in iron red, iron yellow, and blue inks. | |
GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
HDK® H13L | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土,通过火焰水解法制备 | |
HDK® H15 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土,通过火焰水解法制备 | |
HDK® H20 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅,在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产工业粉末时用作松散助剂。 | |
HDK® H2000 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土,通过火焰水解法制备 | |
HDK® H30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅,在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产工业粉末时用作松散助剂。 | |
HDK® N20 | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土,通过火焰水解法制备 | |
HDK® N20D | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土,通过火焰水解法制备 | |
HDK® T30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。 | |
HDK® T40 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产粉末物质时用作松散助剂。 | |
Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
LT-172 | BlueSky Chemical Co., Ltd. | LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....展开 LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. 收起 | |
LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 |