| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| Bis-MPA™ | Perstorp | Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications. | |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...展开 Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. 收起 | |
| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...展开 Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. 收起 | |
| Curalite™ Ox | Perstorp | Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins a...展开 Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins and increases through cure and chemical resistance of the formulation. Curalite™ Ox is suitable for all types of cationic UV printing inks and overprint varnishes both for metal and plastic substrates. 收起 | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Oxymer™ HD112 | Perstorp | Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinker...展开 Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. 收起 | |
| Oxymer™ HD56 | Perstorp | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...展开 Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. 收起 | |
| Phthalic Anhydride Flakes | Perstorp | Phthalic Anhydride Flakes are an intermediate used in the production of unsaturated polyester resins and alkyd resins used in the coatings industry. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...展开 Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. 收起 | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...展开 Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. 收起 | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...展开 Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. 收起 | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...展开 Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...展开 Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...展开 Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...展开 Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. 收起 | |
| YTN-S01-B | Qingdao Xinyutian Chemical Co., Ltd. | YTN-S01-B is a slightly yellow or colorless transparent liquid polyurethane adhesive created for large dry composite such as compound bags and food packing materials. This curing agent contains high solid content, low viscosity, liquidity, transparency, m...展开 YTN-S01-B is a slightly yellow or colorless transparent liquid polyurethane adhesive created for large dry composite such as compound bags and food packing materials. This curing agent contains high solid content, low viscosity, liquidity, transparency, membranous and initial bonding strength with low residual solvents. 收起 | |
| YTN-S02-A | Qingdao Xinyutian Chemical Co., Ltd. | YTN-S02-A is a slightly yellow transparent liquid and a polyurethane adhesive widely used in manufacturing food-packaging laminates that require high temperature sterilization. This main agent contains high solid content, low viscosity and high peel stre...展开 YTN-S02-A is a slightly yellow transparent liquid and a polyurethane adhesive widely used in manufacturing food-packaging laminates that require high temperature sterilization. This main agent contains high solid content, low viscosity and high peel strength. 收起 | |
| YTN-S02-B | Qingdao Xinyutian Chemical Co., Ltd. | YTN-S02-B is a slightly yellow colorless transparent liquid and a polyurethane adhesive widely used in manufacturing food-packaging laminates that require high temperature sterilization. This curing agent contains high solid content, low viscosity and hig...展开 YTN-S02-B is a slightly yellow colorless transparent liquid and a polyurethane adhesive widely used in manufacturing food-packaging laminates that require high temperature sterilization. This curing agent contains high solid content, low viscosity and high peel strength. 收起 | |
| YTSL-860BH | Qingdao Xinyutian Chemical Co., Ltd. | YTSL-860BH is a flaxentranslucent sticky one-liquid type polyurethane resin that is cold-resistant, resistant to hydrolysis, is non-yellowing, included a 63 Mpa tensile strength, intermiscible with pigment and contains color fastness as well as handle and...展开 YTSL-860BH is a flaxentranslucent sticky one-liquid type polyurethane resin that is cold-resistant, resistant to hydrolysis, is non-yellowing, included a 63 Mpa tensile strength, intermiscible with pigment and contains color fastness as well as handle and elasticity. This product is commonly used in chemical fiber knitwear, garment, trappings, shoe material, bags, umbrellas and raincoats. It can be directly used in the face of transfer printing, as colorful ink layer grinded with solvents and pigments and as a bonding layer. 收起 |
