UL Prospector

成功!

成功保存搜索结果
C-2090 Qingdao Xinyutian Chemical Co., Ltd. C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials.
C-2390 Qingdao Xinyutian Chemical Co., Ltd. C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials.
C-3090 Qingdao Xinyutian Chemical Co., Ltd. C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
C-6090 Qingdao Xinyutian Chemical Co., Ltd. C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
Request Sample CAVASOL® W7 M TL Wacker Chemie AG 瓦克化学 CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂,可用于需要高溶解性的应用场合
Request Sample GENIOSIL® GF 31 Wacker Chemie AG 瓦克化学 3-甲基丙烯酰氧基丙基三甲氧基硅烷
Request Sample GENIOSIL® GF 56 Wacker Chemie AG 瓦克化学 乙烯基三乙氧基硅烷
Request Sample GENIOSIL® GF 82 Wacker Chemie AG 瓦克化学 3-缩水甘油醚氧基丙基三乙氧基硅烷
Request Sample GENIOSIL® GF 93 Wacker Chemie AG 瓦克化学 3-氨基丙基三乙氧基硅烷
Request Sample GENIOSIL® XL 10 Wacker Chemie AG 瓦克化学 乙烯基三甲氧基硅烷
Request Sample GENIOSIL® XL 12 Wacker Chemie AG 瓦克化学 乙烯基二甲氧基甲基硅烷
Request Sample GENIOSIL® XL 33 Wacker Chemie AG 瓦克化学 甲基丙烯酰氧甲基三甲氧基硅烷
HA-V204 Qingdao Xinyutian Chemical Co., Ltd. HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V209 Qingdao Xinyutian Chemical Co., Ltd. HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V220 Qingdao Xinyutian Chemical Co., Ltd. HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起
HAV-216 Qingdao Xinyutian Chemical Co., Ltd. HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
HAV-228 Qingdao Xinyutian Chemical Co., Ltd. HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
Request Sample HDK® H13L Wacker Chemie AG 瓦克化学 合成的憎水的无定形硅土,通过火焰水解法制备
Request Sample HDK® H15 Wacker Chemie AG 瓦克化学 合成的憎水的无定形硅土,通过火焰水解法制备
Request Sample HDK® H20 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产工业粉末时用作松散助剂。
Request Sample HDK® H2000 Wacker Chemie AG 瓦克化学 合成的憎水的无定形硅土,通过火焰水解法制备
Request Sample HDK® H30 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产工业粉末时用作松散助剂。
Request Sample HDK® N20 Wacker Chemie AG 瓦克化学 合成的亲水的无定形硅土,通过火焰水解法制备
Request Sample HDK® N20D Wacker Chemie AG 瓦克化学 合成的亲水的无定形硅土,通过火焰水解法制备
Request Sample HDK® T30 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。
Request Sample HDK® T40 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产粉末物质时用作松散助剂。
LIOCRYL AM 432 Synthopol Chemie Germany LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...展开 LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. 收起
LIOCRYL AM 483 Synthopol Chemie Germany LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or...展开 LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 900 Synthopol Chemie Germany LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. Afte...展开 LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. After drying, the film has a good hardness and blocking resistance despite the low MFFT. It has an extremely high light and water resistance as well as adhesion even when exposed to large amounts of water on substrates such as glass, metal, and wood. 收起
LIOCRYL AM 903 Synthopol Chemie Germany LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The ...展开 LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. LIOCRYL AM 903 contains no alkyl phenol ethoxylates (APEO's). 收起
LIOCRYL AM 907 Synthopol Chemie Germany LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is disti...展开 LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is distinguished by good blocking resistance, good flow and high gloss, and good yellowing resistance. Films of the emulsion are clear, tough and resilient, light resistant, and display good resistance to water, ethanol, and alkali. 收起
LIOCRYL AM 912 Synthopol Chemie Germany LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguish...展开 LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguished by excellent adhesion to old alkyd resin coats exposed to moisture. The glossy paints are characterized by good stability, levelling, resistance to light and blocking resistance. 收起
LIOCRYL AM 914 Synthopol Chemie Germany LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance...展开 LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 916 Synthopol Chemie Germany LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion...展开 LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 920 Synthopol Chemie Germany LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints...展开 LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. For the purpose of 2 C paints Liocryl AM 920 can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance, plasticiser resistance and non-yellowing properties are required. 收起
LIOCRYL AM 921 Synthopol Chemie Germany LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and ...展开 LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. Coatings based on Liocryl AM 921 show good grain enhancement on wood. Liocryl AM 921 is an APEO free version of Liocryl AM 920. 收起
LIOCRYL AM 923 Synthopol Chemie Germany LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and f...展开 LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. For this purpose it can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance and yellowing resistance are required. As a result of the fine particle size, excellent transparency in the wet film is obtained together with very good grain enhancement. 收起
LIOCRYL AM 951 Synthopol Chemie Germany LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resist...展开 LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resistance and good stability characteristics. 收起
LIOCRYL AM 955 Synthopol Chemie Germany LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very...展开 LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very good. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起
LIOCRYL AM 982 Synthopol Chemie Germany LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it con...展开 LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it contains no plasticisers and no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 320 N Synthopol Chemie Germany LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries ...展开 LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water and a high saponification resistance. Because of these properties Liocryl AS 320 is expecially suitable for the production of outdoor paints and plastics-bound plasters as well as for impregnating and priming brickwork and sanding plasters. 收起
LIOCRYL AS 603 Synthopol Chemie Germany LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and h...展开 LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and high gloss. The emulsion is preserved for storage. It contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 610 Synthopol Chemie Germany LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Co...展开 LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Combined with PU dispersion LIOPUR 92-091, varnishes can be formulated that meet the requirements for receiving the “blue angel” mark denoting environmentally safe products. The films of AS 610 are clear, hard and have good water resistance, and the necessary abrasion values for parquet floor varnishes (Taber abraser). 收起
LIOCRYL AS 615 Synthopol Chemie Germany LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserve...展开 LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserved for storage, and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 640 Synthopol Chemie Germany LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addi...展开 LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addition of coalescents for proper film formation The emulsion film can have a slightly structured surface. This phenomenon does not however appear in formulated coatings, therefore the properties of the coatings (such as gloss or transparency) are not adversely affected. 收起
LIOCRYL AS 680 Synthopol Chemie Germany LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based...展开 LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based on these combinations are distinguished by good chemical resistance against ethanol and plasticiser. Used as a sole binder, Liocryl AS 680 has good adhesion properties on plastics such as polystyrene. The resistance against ethanol and petrol is good. 收起
LIOPTAL 541 Synthopol Chemie Germany LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination wi...展开 LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. 收起
LIOPTAL 836 Synthopol Chemie Germany LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...展开 LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. 收起
LIOPTAL A 424 Synthopol Chemie Germany LIOPTAL A 424 is a heat-reactive acrylic resin that is cross-linkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with high reactivity, stoving temperatures starting at 100°C.
LIOPTAL A 453 60% Synthopol Chemie Germany LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving c...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving conditions 130°C and higher. 收起
LIOPTAL A 453 65% Synthopol Chemie Germany LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product a...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product are 130°C and higher. 收起
LIOPTAL A 470 Synthopol Chemie Germany LIOPTAL A 470 is an acrylic resin that is crosslinkable with melamine resins. It is recommended for stove-drying top coats in combination with melamine resins.
LIOPTAL A 471 Synthopol Chemie Germany LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathe...展开 LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathering resistance. It is suitable for stoving conditions above 130°C. This product is esed for metal substrates as a base coat and topcoat for high solid automotive and industrial coatings. 收起
LIOPTAL B 49 Synthopol Chemie Germany LIOPTAL B 49 is a fast-drying medium-oil alkyd resin. It can be used in machine and automotive coatings, radiator paints, industrial coatings and primers, effect coatings, and with melamine resins for 80°C.
LIOPTAL ES 43 Synthopol Chemie Germany LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...展开 LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. 收起
LIOPTAL TH 406 Synthopol Chemie Germany LIOPTAL TH 406 is a short-oil alkyd resin modified with phenol resin. It is suitable for use in fast-drying anti-corrosive primers and synthetic resin-based paints, shop primers, knife fillers, and stove-drying industrial primers and topcoats.
LIOPUR 2004-140 Synthopol Chemie Germany LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film formi...展开 LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film forming temperature, LIOPUR2004-140 does not need any coalescence agent for filmforming at room temperature. Therefore it can be combined with acrylic emulsions with high Tg like LIOCRYL AS 680 and AS 615. 收起
LIOPUR 2004-422 Synthopol Chemie Germany LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance a...展开 LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance and good resistance to ethanol. LIOPUR 2004-422 is recommended for waterbased 1C-wood lacquers with high hardness, good taber abraison and very good chemical resistance. 收起
LIOPUR 2005-380 Synthopol Chemie Germany LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C...展开 LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C wood lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Lacquers based on LIOPUR 2005-380 also exhibit a good recoatibility. 收起
LIOPUR PFL 1130 Synthopol Chemie Germany LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...展开 LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. 收起
LIOPUR PFL 1154 Synthopol Chemie Germany LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1...展开 LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1154 needs a small amount of appr 2-3 % butylglycol for film formation. Films based on LIOPUR PFL 1154 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 1154 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 1154 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起
LIOPUR PFL 1263 Synthopol Chemie Germany LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following...展开 LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following Zwick material testing characteristics after 4 days drying at room temperature (initial force 1 N, testing speed 100 mm/min): Tear strength approximately 1 N/mm^2, and elongation at break approximately 700%. 收起
LIOPUR PFL 1284 Synthopol Chemie Germany LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility a...展开 LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility and elasticity. These coatings exhibit a very good water resistance and good ethanol resistance. 收起
LIOPUR PFL 1908 Synthopol Chemie Germany LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good su...展开 LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. This product shows a good wet and dry appearance on wood. 收起
LIOPUR PFL 1964 Synthopol Chemie Germany LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic ...展开 LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic hydroxy-polyesters or polyurethane dispersions as 2-pack system for soft-feeling and decor paints. As combination partner the polyurethane dispersion Liopur PFL 1953 based on a polyester is recommended in order to find the right balance between price and performance. 收起
LIOPUR PFL 2146 Synthopol Chemie Germany LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air ...展开 LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. 收起
LIOPUR PFL 2315 Synthopol Chemie Germany LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit g...展开 LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 2315 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 2315 can be used in combination with water-emulsifiable polyisocyanates for air drying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 2315 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起
LIOPUR PFL 2323 Synthopol Chemie Germany LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 %...展开 LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 % butylglycol for film formation. Coatings based on LIOPUR PFL2323 form tack-free, transparent films with good surface hardness after air drying. These coatings exhibit a very good water resistance and for polyurethane dispersions excellent ethanol resistance. 收起
LIOPUR PFL 2366 Synthopol Chemie Germany LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are ta...展开 LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are tack-free and display good surface resistance of appr. 120 sec Pendulum hardness after König (90 μm wet film after 24 h drying at room temperature). LIOPUR PFL 2366 is suitable as a sole binder in the formulation of solventpoor air-drying 1-pack parquet flooring and furniture varnishes owing to sufficient chemical resistance 收起
LIOPUR PFL 2392 Synthopol Chemie Germany LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good hu...展开 LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good humidity resistance and good adhesion to different plastics due to the hydrophobic polymer character and its good intercoat adhesion to conventional 2C topcoats. 收起
LIOPUR PFL 2634 Synthopol Chemie Germany LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hard...展开 LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hardeners like water dilutable polyisocyanates. Films of these two-component coatings exhibit very high pendulum hardness and excellent light resistance. This product is also suitable for one component stoving enamels in combination with suitable water-dilutable crosslinkers like melamine resins or blocked polyisocyanates. 收起
LIOPUR PFL 2900 Synthopol Chemie Germany LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch ...展开 LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. It is suitable for 1C solventpoor wood and parquet lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Owing to its oily nature, paints can be made with LIOPUR PFL 2900 which have better high-build characteristics than conventional dispersions. 收起
LIOPUR PFL 2966 Synthopol Chemie Germany LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coa...展开 LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coatings with excellent haptic, crockmeter-resistance and resistance to hydrolysis. LIOPUR PFL 1964 based on polycarbonate is recommended as combination partner to improve resistance to hydrolysis. 收起
LIOPUR PFL 3046 Synthopol Chemie Germany LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, t...展开 LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. LIOPUR PFL 3046 exhibits very good water resistance and good ethanol resistance. The dispersion is recommended for combination with Liocryl acrylic emulsions. 收起
LIOPUR PFL 3242 Synthopol Chemie Germany LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. 收起
LIOPUR PFL 3526 Synthopol Chemie Germany LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transp...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. Coatings based on LIOPUR PFL 3526 exhibit excellent flame protection properties. This product shows a good wet and dry appearance on wood. 收起
LIOPUR PKS 2845 Synthopol Chemie Germany LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s fl...展开 LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s flexibility, even at low temperatures and resistance to hydrolysis LIOPUR PKS 2845 is especially recommended for making contact adhesives with good peel strength, used to laminate a wide range of materials. 收起
Liocryl XAM 2827 Synthopol Chemie Germany Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is ...展开 Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起
Liocryl XAM 5134 Synthopol Chemie Germany Liocryl XAM 5134 is an aqueous, self-crosslinking pure acrylic emulsion for 1-pack parquet and furniture varnishes. It is free of solvents, plasticisers, formaldehyde and APEOs and stands out with good chemical resistance.
Liocryl XAM 6979 Synthopol Chemie Germany Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet f...展开 Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet film clarity. 收起
POL-1125 Qingdao Xinyutian Chemical Co., Ltd. POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起
POL-1180 Qingdao Xinyutian Chemical Co., Ltd. POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起
POL-123 Qingdao Xinyutian Chemical Co., Ltd. POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起
POL-1232 Qingdao Xinyutian Chemical Co., Ltd. POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起
POL-1234 Qingdao Xinyutian Chemical Co., Ltd. POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起
POL-1238 Qingdao Xinyutian Chemical Co., Ltd. POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起
POL-1262 Qingdao Xinyutian Chemical Co., Ltd. POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起
POL-1266 Qingdao Xinyutian Chemical Co., Ltd. POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起
POL-1276 Qingdao Xinyutian Chemical Co., Ltd. POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起
POL-138 Qingdao Xinyutian Chemical Co., Ltd. POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起
POL-156 Qingdao Xinyutian Chemical Co., Ltd. POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起
POL-1756 Qingdao Xinyutian Chemical Co., Ltd. POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起
POL-1856 Qingdao Xinyutian Chemical Co., Ltd. POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起
POL-2016 Qingdao Xinyutian Chemical Co., Ltd. POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起
POL-2112 Qingdao Xinyutian Chemical Co., Ltd. POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起
POL-23112 Qingdao Xinyutian Chemical Co., Ltd. POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起
POL-2322 Qingdao Xinyutian Chemical Co., Ltd. POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起
POL-2325 Qingdao Xinyutian Chemical Co., Ltd. POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起
POL-2328 Qingdao Xinyutian Chemical Co., Ltd. POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起
POL-2338 Qingdao Xinyutian Chemical Co., Ltd. POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起