| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | 阴离子型分散剂，特为钛白粉分散开发，也可用于其他的填料和无机颜料中，适用于汽车漆，工业漆，卷钢涂料和酸固化 | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (以前的 Efka® 5210)可帮助润湿和分散填料（CaCO3和AI (OH) 3），含不饱和聚酯树脂或结合聚苯乙烯，聚醋酸乙烯和苯乙烯-丁二烯共聚物。它可使填料易于添加，减少分散时间。它也可降低和稳定浆体粘度，从而改善流平，增加填料含量，并提高防火性能。Efka® FA 4612设计用于含填料的SMC和BMC共混物。它也适合用于含填料的胶衣涂料 | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (以前的Efka® 5215是一种有效地润湿和分散助剂，适用于无机填料。它可改善润湿性，使填料易于添加，降低浆体/混合物的粘度，增加填料含量。Efka® FA 4615适用于含填料的不饱和聚酯体系（SMC、BMC共混物、胶衣涂料和腻子）或结合聚苯乙烯、聚醋酸乙烯和苯乙烯-丁二烯共聚物。 | |
| EFKA® FA 4620 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...展开 EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). 收起 | |
| EFKA® FA 4642 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...展开 EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. 收起 | |
| EFKA® FA 4644 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...展开 EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. 收起 | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...展开 EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. 收起 | |
| EFKA® FA 4666 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents floodi...展开 EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. 收起 | |
| Efka® FA 4670 | BASF Formulation Additives 巴斯夫配方助剂 | 高分子两不饱和羧酸，降低亲水颜料或填料和载体间的界面张力，减少分散时间，稳定颜料分散，减少颜料沉淀，防止浮色和发花 | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...展开 EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. 收起 | |
| Efka® FA 4672 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4672 (之前的Texaphor® SF 71)是一种润湿和分散助剂，用于反应性树脂。该无色到浅黄色液体是一种离子和非离子酯的混合物。它的降粘特性使之可专门用于高固含和全固含体系。Efka® FA 4672确保填料可被快速并优化的分散。降粘作用使填料更易混合，可获取更高的填料含量。Efka® FA 4672与各种基料类型相容，因此可用于双组份PUR、双组份EP和不饱和聚酯树脂 | |
| EFKA® FL 3778 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...展开 EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. 收起 | |
| Efka® PA 4101 | BASF Formulation Additives 巴斯夫配方助剂 | 用于生产微脂色母浆的分散树脂，表现出良好的润湿性和稳定性，与常用的树脂相容性极佳，能与胺基树脂或聚异氰酸酯交联 | |
| EFKA® PU 4063 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time an...展开 EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, EFKA® PU 4063 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on EFKA® PU 4063 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. 收起 | |
| EFKA® SL 3033 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...展开 EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. 收起 | |
| Efka® SL 3259 | BASF Formulation Additives 巴斯夫配方助剂 | 它是一种印刷油墨用非反应性滑爽和流平/润湿助剂。它是不含溶剂的改性聚硅氧烷，适用于油墨。它与各种树脂相容，而且可降低液体膜的表面张力，从而提供出色的基材润湿性 | |
| Efka® SL 3883 | BASF Formulation Additives 巴斯夫配方助剂 | 以不饱和基团终止的有机硅改性聚合物，用于木器漆和油墨体系，促进流平，增滑和提高表面性能，增加抗黏联性，更好的底材润湿 | |
| Efka® WE 3110 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® WE 3110 (以前的Lumiten® AQA 10)是一种非离子型表面活性剂，对醇酸漆中的水具有无与伦比的稳定效率。它可用于改善水性配方的稳定性。Efka® WE 3110具有出色的性能，例如出色的乳化性能、易于配制、维护醇酸漆性能，并大大降低总VOC | |
| FoamStar® PB 2724 | BASF Formulation Additives 巴斯夫配方助剂 | 具有润湿性能的消泡剂，用于乳胶漆 | |
| Hydropalat® WE 3110 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3110 (以前的Hydropalat® 110)是一种基材润湿剂，适用于水性工业、木器、汽车涂料、印刷油墨，可大大降低动态表面张力。改产品推荐作为低起泡表面活性剂和基材润湿剂用于承受着高机械应力的体系 | |
| Hydropalat® WE 3116 | BASF Formulation Additives 巴斯夫配方助剂 | APG的分散剂，用于水性涂料，尤其适用于无溶剂和无基料的色浆 | |
| HYDROPALAT® WE 3120 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. HYDROPALAT® WE 3120 can al...展开 HYDROPALAT® WE 3120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. HYDROPALAT® WE 3120 can also act as a good antifoam agent in numerous applications. 收起 | |
| Hydropalat® WE 3127 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3127 (formerly Hydropalat® PLS 127) is a biodegradable surfactant for pigment wetting and pigment dispersion in aqueous paints, inks and adhesives. | |
| Hydropalat® WE 3240 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3240 (以前的Hydropalat® 140)是一种低起泡流平助剂和基材润湿剂，适用于水性漆和涂料，基于有机改性聚硅氧烷。相比基于其它化学品的基材润湿剂，Hydropalat® WE 3240可大大降低静态界面张力。即使它在浓度为0.5%时，张力值也可控制在低于25 mN/m | |
| HYDROPALAT® WE 3322 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3322 is a non-ionic, 100% active wetting agent effective in water borne coatings intended for metal, wood and plastic substrates. This new wetting agent is effective in coatings and inks based on a wide variety of emulsions including PUD’s,...展开 HYDROPALAT® WE 3322 is a non-ionic, 100% active wetting agent effective in water borne coatings intended for metal, wood and plastic substrates. This new wetting agent is effective in coatings and inks based on a wide variety of emulsions including PUD’s, acrylics, and styrenated acrylics. HYDROPALAT® WE 3322 does not stabilize foam and can act as a defoamer in formulations in addition to imparting outstanding wetting properties. When used at the recommended level, HYDROPALAT® WE 3322 should not diminish the corrosion resistance or change the recoat characteristics of the coating. The product is free of silicones, alkyl phenol ethoxylates (APE’s) and solvent. 收起 | |
| HYDROPALAT® WE 3475 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critica...展开 HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critical micelle concentration of approximately 1 g active substance/l and the strong reduction in surface tension of aqueous solutions, even when using low concentrations, make HYDROPALAT® WE 3475 an ideal surface active agent. This product is just slightly water-soluble. The water solubility may be increased by the addition of a small amount of a solubilizer allowing solubility of up to 80 % to be achieved. Diluting HYDROPALAT® WE 3475 with water is possible up to a certain extent, but liquid-crystalline gel type phases may occur in the region of approximately 50 % active substance. 收起 | |
| Hydropalat® WE 3477 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3477 (以前的Hydropalat® 875 PG)是一种高效润湿助剂，包含磺基碳酸酯，钠盐，溶于水/丙二醇 | |
| Hydropalat® WE 3485 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3485 (以前的Hydropalat® 885)是一种润湿剂，适用于水性油漆体系 | |
| Hydropalat® WE 3486 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3486 (以前的Hydropalat® 886)是一种高效浓缩的润湿助剂，适用于水性涂料和印刷油墨 | |
| Hydropalat® WE 3500 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3500 shows excellent surface leveling and substrate wetting while avoiding side effects like cratering, foam stabilization or effects on intercoat adhesion. It is recommended for high-end waterbased Industrial coatings applications. | |
| HYDROPALAT® WE 3650 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilizat...展开 HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilization. HYDROPALAT® WE 3650 can effectively be used in lacquers or inks that show problems regarding substrate wetting or cratering. Due to its wetting properties the product can also have a positive effect on ink transfer and adhesion. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| SCHWEGO® corrit | Bernd Schwegmann GmbH & Co. KG | Schwego® Corrit主要作为一种锈转化助剂应用于水性油漆。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，可生物降解，不含PFOS和PFOA，基于C4技术 | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® therm | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® therm 是一种用于溶剂型涂料体系的湿润添加剂。在涂料体系中添加这款产品可以在增加涂膜指甲硬度的同时减少烘干时间或者降低烘干温度等。SCHWEGO® therm提供更经济，更高质量的加工过程。这款产品可用于多种溶剂型系统，如金属饰面和木饰面。 | |
| SCHWEGO® Wett 6237 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6237可用于所有类型水稀释体系，例如：乳液、乳胶、混合体系、中和体系、适用于有机和无机颜料 | |
| SCHWEGO® Wett 6242 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6242可用于分散无机和有机颜料或炭黑。特别适用于通用色浆和高填充体系的制备 | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6246 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® Wett 6247 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6247 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® wett 6248 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6248是一种润湿分散剂，用于溶剂型和不含树脂的体系。它适合有机和无机颜料以及颜料浓缩浆的分散。该产品可减少分散时间、色彩强度，减少沉降，并增加光泽度。它也可减少浮色，提高流平性，并具有出色的相容性。 SCHWEGO® WETT 6248特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® wett 6249 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6249是一款通用润湿分散剂，用于溶剂型和不含树脂的体系。 SCHWEGO® WETT 6249适合有机和无机颜料以及颜料浓缩浆的分散。本产品特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6260可用于分散无机和有机颜料或炭黑，特别适用于制备UV涂料 | |
| SCHWEGO® Wett 6264 | Bernd Schwegmann GmbH & Co. KG | 溶剂型涂料体系的润湿和分散助剂。可用于分散无机和有机颜料或炭黑。它尤其适合用于制备通用型浆体和高填料份体系 | |
| SCHWEGO® Wett 6267 | Bernd Schwegmann GmbH & Co. KG | 通用型润湿分散剂，用于溶剂型、无溶剂和无树脂体系。适合用于无机和有机颜料以及颜料浓缩物的分散 | |
| SCHWEGO® Wett 6292 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6292可用于分散无机、有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 6293 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6293是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6294 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固含或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6295 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固体份或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6296 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。对白色和无机颜料具有出色的分散性能，适合用于填料分散 | |
| SCHWEGO® Wett 6297 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6297 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6298 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6298 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 8081 | Bernd Schwegmann GmbH & Co. KG | 两种添加剂都适用于所有常规工业涂料。Schwego® Wett 8081尤其适用于醇酸、单组分环氧体系和颜料色浆。Schwego® Wett 8082非常适用于DD油漆和双组分环氧体系。它们通常不能用于自干丙烯酸。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8082 | Bernd Schwegmann GmbH & Co. KG | 两种助剂几乎适合所有常规工业涂料。Schwego® Wett 8081尤其适合醇酸树脂、单组份环氧体系和颜料浆体。Schwego® Wett 8082非常适合用于DD油漆和双组份环氧体系。它们通常不能用于自干丙烯酸。与油漆其它性能之间的相互影响尚不知晓 | |
| SCHWEGO® Wett 8083 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8083几乎适用于所有常规工业漆。特别适用于苯胺油墨。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8092 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8092可用于分散无机和有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 8319 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8319适用于几乎所有类型的涂料。有时会发生不相容，但是极少见。Schwego® Wett 8319 可用于所有常规和水性涂料体系 | |
| SCHWEGO® Wett 8320 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8320作为颜料色浆的润湿剂和分散剂非常有效，水性，不含基料和溶液。Schwego® Wett 8320可优化流平性，即使是高着色体系也可。用于水性漆，可获得非常高的光泽和超高的着色力。用于水性醇酸、聚酯树脂和聚氨酯乳液效果特别好 | |
| SCHWEGO® Wett 8321 | Bernd Schwegmann GmbH & Co. KG | 该产品可用于几乎所有的水性快干漆体系，甚至自干清漆和烤漆。它易应用于水性双组分PUR体系，因为Schwego® Wett 8321不会影响储存时间。未见对其它油漆性能的负面影响 |
