UL Prospector

成功!

成功保存搜索结果
2-Ethyl-4-methylimidazole Jiangsu Cale New Materials Co., Ltd. 2-Ethyl-4-methylimidazole is a yellow transparent liquid. It has a melting point of 292℃ and an assay of 96.0%. 2-Ethyl-4-methylimidazole is used in epoxy resin bonding, coating, molding, sealing, dipping, and composite materials.
2-Ethylimidazole Jiangsu Cale New Materials Co., Ltd. 2-Ethylimidazole is a white crystal powder. It can be used in medium temperature curing agent for epoxy resin. This product has a melting point of 77-80℃ and an assay of 99.0%. 2-Ethylimidazole is used in bonding, sealing, coating, and laminating of instr...展开 2-Ethylimidazole is a white crystal powder. It can be used in medium temperature curing agent for epoxy resin. This product has a melting point of 77-80℃ and an assay of 99.0%. 2-Ethylimidazole is used in bonding, sealing, coating, and laminating of instruments, meters, electric components, chemical industry machines, vehicles, and defense industry products. 收起
2-Methylimidazole Jiangsu Cale New Materials Co., Ltd. 2-Methylimidazole is a white to offwhite crystalline powder. This product has moisture absorbility, is soluble in water and alcohol, hardly soluble in benzene, toxic, pungent, and corrosive to skin and mucous membrane. 2-Methylimidazole is used as a curin...展开 2-Methylimidazole is a white to offwhite crystalline powder. This product has moisture absorbility, is soluble in water and alcohol, hardly soluble in benzene, toxic, pungent, and corrosive to skin and mucous membrane. 2-Methylimidazole is used as a curing agent for epoxy resin and an auxiliary agent for textile dyes. 收起
2-Phenylimidazole Jiangsu Cale New Materials Co., Ltd. 2-Phenylimidazole is a off white or faint yellow crystal powder. It has a melting point of 146.0 - 149.0℃. 2-Phenylimidazole is used as a curing agent for epoxy resin and polyurethane, and used as intermediate medicine, pesticide, and dyestuff.
Benox® A-70 UNITED INITIATORS GMBH & CO KG Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® A-75 UNITED INITIATORS GMBH & CO KG Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® A-80 UNITED INITIATORS GMBH & CO KG Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® B-50 UNITED INITIATORS GMBH & CO KG Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...展开 Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-106 UNITED INITIATORS GMBH & CO KG Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...展开 Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-210 UNITED INITIATORS GMBH & CO KG Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-230 UNITED INITIATORS GMBH & CO KG Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...展开 Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-513 UNITED INITIATORS GMBH & CO KG Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...展开 Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-713 UNITED INITIATORS GMBH & CO KG Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55 UNITED INITIATORS GMBH & CO KG Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展开 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55-107 UNITED INITIATORS GMBH & CO KG Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...展开 Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55-108 UNITED INITIATORS GMBH & CO KG Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...展开 Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® C-50S UNITED INITIATORS GMBH & CO KG Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in bot...展开 Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in both ambient temperature and elevated temperature cure processes, in combination with amine accelerators. Benox® C-50S dissolves fast in acrylic resins and unsaturated polyester and is easy to disperse. 收起
Benox® L-40LV UNITED INITIATORS GMBH & CO KG Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure...展开 Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure of road marking paints based on acrylic resins. 收起
C-2090 Qingdao Xinyutian Chemical Co., Ltd. C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials.
C-2390 Qingdao Xinyutian Chemical Co., Ltd. C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials.
C-3090 Qingdao Xinyutian Chemical Co., Ltd. C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
C-6090 Qingdao Xinyutian Chemical Co., Ltd. C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) CENOTEC Co., Ltd. CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起
CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) CENOTEC Co., Ltd. CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings.
CENOBEADS™ CZS (Zirconium Silicate Bead) CENOTEC Co., Ltd. CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings.
CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) CENOTEC Co., Ltd. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起
CenoFlour CENOTEC Co., Ltd. CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings.
CenoSilicate (Premium) CENOTEC Co., Ltd. CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint.
CenoSilicate (Ultra Premium) CENOTEC Co., Ltd. CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes.
Crestacryl® 71-1030 Scott Bader Crestacryl® 71-1030 is a thermoplastic styrene acrylic resin that exhibits good adhesion, flexibility, and vapor permeability along with good alkali and water resistance properties. This product is ideal for use in high-grade façade, asbestos, wall, and c...展开 Crestacryl® 71-1030 is a thermoplastic styrene acrylic resin that exhibits good adhesion, flexibility, and vapor permeability along with good alkali and water resistance properties. This product is ideal for use in high-grade façade, asbestos, wall, and concrete coatings. 收起
Crestacryl® 71-5060 Scott Bader Crestacryl® 71-5060 is a thermoplastic, pure acrylic resin which gives rapid solvent release, very good elasticity, excellent adhesion on metallic substrates, and very good alkali and water resistance. This product is ideal for use in primer and finish ap...展开 Crestacryl® 71-5060 is a thermoplastic, pure acrylic resin which gives rapid solvent release, very good elasticity, excellent adhesion on metallic substrates, and very good alkali and water resistance. This product is ideal for use in primer and finish applications for wood and metals. 收起
Crestacryl® 71-8026 Scott Bader Crestacryl® 71-8026 is a thermoplastic acrylic resin that displays good hardness, adhesion, and elasticity. This product is ideal for use in fast-drying, high grade road-marking paints.
Crestacryl® 71-9044 Scott Bader Crestacryl® 71-9044 is a thermoplastic acrylic resin that displays good hardness, elasticity, and adhesion properties. This product is ideal for use in fast-drying, high quality road-marking paints with excellent durability.
Crestakyd® 10-0504 Scott Bader Crestakyd® 10-0504 is a long oil air-drying alkyd, derived from linoleic rich fatty acids, esterified with pentaerythritol, and supplied at 100% solids. This product is ideal for use in low VOC exterior paints and wood stains.
Crestakyd® 10-1019 Scott Bader Crestakyd® 10-1019 is a long oil air-drying alkyd that is fast drying and has good flow and brush characteristics as well as exhibiting good weather resistance and gloss retention properties. It can be used in economical, decorative, and do-it-yourself pa...展开 Crestakyd® 10-1019 is a long oil air-drying alkyd that is fast drying and has good flow and brush characteristics as well as exhibiting good weather resistance and gloss retention properties. It can be used in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-1022 Scott Bader Crestakyd® 10-1022 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself pain...展开 Crestakyd® 10-1022 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-1025 Scott Bader Crestakyd® 10-1025 is a long oil air-drying alkyd that displays fast drying, excellent flow and brushability characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself pain...展开 Crestakyd® 10-1025 is a long oil air-drying alkyd that displays fast drying, excellent flow and brushability characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-2020 Scott Bader Crestakyd® 10-2020 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in commercial, decorative, and do-it-yo...展开 Crestakyd® 10-2020 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in commercial, decorative, and do-it-yourself paints, as well as primers, varnishes, and topcoats. 收起
Crestakyd® 10-2023 Scott Bader Crestakyd® 10-2023 is a long oil, air-drying, isophthalic alkyd with high solids content and excellent flow & brushability characteristics. This product is recommended for use in low VOC exterior paints, wood stains, and lacquers.
Crestakyd® 10-2033 Scott Bader Crestakyd® 10-2033 is a long oil air-drying alkyd that displays fast drying, excellent brushability, and good flow characteristics. This product is ideal for use in economical and decorative paints, varnishes, and primers. It also features excellent compa...展开 Crestakyd® 10-2033 is a long oil air-drying alkyd that displays fast drying, excellent brushability, and good flow characteristics. This product is ideal for use in economical and decorative paints, varnishes, and primers. It also features excellent compatibility with "universal" colorants. 收起
Crestakyd® 10-2505 Scott Bader Crestakyd® 10-2505 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good gloss retention and weather resistance properties. This product is ideal for use in economical and decorative paints, va...展开 Crestakyd® 10-2505 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good gloss retention and weather resistance properties. This product is ideal for use in economical and decorative paints, varnishes, and primers. 收起
Crestakyd® 10-3000 Scott Bader Crestakyd® 10-3000 is a long oil air-drying alkyd, derived from linoleic-rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and mar...展开 Crestakyd® 10-3000 is a long oil air-drying alkyd, derived from linoleic-rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and marine paints, undercoats, maintenance primers, and floor varnishes. 收起
Crestakyd® 10-3002 Scott Bader Crestakyd® 10-3002 is a high viscosity, long oil, air-drying alkyd derived from linoleic rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels,...展开 Crestakyd® 10-3002 is a high viscosity, long oil, air-drying alkyd derived from linoleic rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and marine paints, undercoats, maintenance primers, and floor varnishes. 收起
Crestakyd® 10-3507 Scott Bader Crestakyd® 10-3507 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in decorative gloss paints and varnishe...展开 Crestakyd® 10-3507 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in decorative gloss paints and varnishes. 收起
Crestakyd® 20-5024 Scott Bader Crestakyd® 20-5024 is a medium oil, air-drying, chain stopped alkyd that exhibits excellent drying, gloss, and weathering properties. This product is ideal for use in air-drying and low bake industrial finishes.
Crestakyd® 20-5029 Scott Bader Crestakyd® 20-5029 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering characteristics. This product is ideal for use in air-dry primers and industrial finishes.
Crestakyd® 20-5036 Scott Bader Crestakyd® 20-5036 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering properties. This product is ideal for use in air-drying primers and industrial finishes.
Crestakyd® 20-6051 Scott Bader Crestakyd® 20-6051 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering properties. This product is ideal for use in primers and other air-drying industrial finishes.
Crestakyd® 20-9021 Scott Bader Crestakyd® 20-9021 is a medium oil, air-drying, high viscosity, chain-stopped alkyd that displays excellent gloss, weather resistance, and flow characteristics. This product is ideal for use in air drying primers and industrial finishes.
Crestakyd® 20-9509 Scott Bader Crestakyd® 20-9509 is a high solids, medium oil alkyd, based on linoleic rich fatty acids and supplied in butyl acetate. It is designed for use in acid curing wood coating finishes. Coating systems based on this resin exhibit fast cure, excellent pot-life...展开 Crestakyd® 20-9509 is a high solids, medium oil alkyd, based on linoleic rich fatty acids and supplied in butyl acetate. It is designed for use in acid curing wood coating finishes. Coating systems based on this resin exhibit fast cure, excellent pot-life, and good wet heat resistance. 收起
Crestakyd® 30-5005 Scott Bader Crestakyd® 30-5005 is a short oil air-drying alkyd that exhibits fast drying and good hardness development. This product is ideal for use in air-drying primers and finishes for wood and metal.
Crestakyd® 30-5016 Scott Bader Crestakyd® 30-5016 is a short oil, air-drying, chain-stopped alkyd based on mixed non-yellowing oils. It displays excellent resistance to oils, greases, and water. This product is ideal for use in rapid drying industrial paints, low bake enamels, and vehi...展开 Crestakyd® 30-5016 is a short oil, air-drying, chain-stopped alkyd based on mixed non-yellowing oils. It displays excellent resistance to oils, greases, and water. This product is ideal for use in rapid drying industrial paints, low bake enamels, and vehicle and machinery finishes. 收起
Crestakyd® 30-5018 Scott Bader Crestakyd® 30-5018 is a short oil alkyd derived from linoleic-rich fatty acids and supplied in xylene. It displays excellent cold check properties as well as good wet-heat resistance and stackability. This product is specially designed for use in industri...展开 Crestakyd® 30-5018 is a short oil alkyd derived from linoleic-rich fatty acids and supplied in xylene. It displays excellent cold check properties as well as good wet-heat resistance and stackability. This product is specially designed for use in industrial wood coatings and acid-curing wood finishes. 收起
Crestakyd® 30-5028 Scott Bader Crestakyd® 30-5028 is a short oil alkyd displaying good color retention. It works well as a plasticizer for nitrocellulose and in combination with low reactivity amino resins for acid curing processes. This product is ideal for use in industrial wood and ...展开 Crestakyd® 30-5028 is a short oil alkyd displaying good color retention. It works well as a plasticizer for nitrocellulose and in combination with low reactivity amino resins for acid curing processes. This product is ideal for use in industrial wood and metal stove finishes, stoving enamels, and automotive finishes. 收起
Crestakyd® 30-5034 Scott Bader Crestakyd® 30-5034 is a low colour, short oil alkyd intended primarily for use in wood coatings. It can be used in combination with topcoats and nitrocellulose sealers. Coatings formulated with this product typically exhibit rapid solvent release and good...展开 Crestakyd® 30-5034 is a low colour, short oil alkyd intended primarily for use in wood coatings. It can be used in combination with topcoats and nitrocellulose sealers. Coatings formulated with this product typically exhibit rapid solvent release and good cold check resistance. 收起
Crestakyd® 30-5042 Scott Bader Crestakyd® 30-5042 is a short oil air-drying alkyd, provided in xylene, that exhibits fast drying properties. This product is ideal for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.
Crestakyd® 30-5500 Scott Bader Crestakyd® 30-5500 is a short oil, air-drying, chain-stopped alkyd, derived from linoleic-rich fatty acids and supplied in xylene. High solids content helps to ensure VOC compliance in final formulations. This product is ideal for use in low VOC industria...展开 Crestakyd® 30-5500 is a short oil, air-drying, chain-stopped alkyd, derived from linoleic-rich fatty acids and supplied in xylene. High solids content helps to ensure VOC compliance in final formulations. This product is ideal for use in low VOC industrial applications such as air-drying topcoats, DTM primers, one coat primer systems, and paints. 收起
Crestakyd® 30-8062 Scott Bader Crestakyd® 30-8062 is a short oil air-drying alkyd that displays quick drying and high hardness properties. This product is ideal for use in air-drying primers and finishes for metal and wood, as well as road marking paints.
Crestakyd® 30-9055 Scott Bader Crestakyd® 30-9055 is a short oil air-drying alkyd that displays fast drying, excellent stability, and outstanding cold check properties. This product is ideal for use in wood coatings and easy-sanding NC sealers and NC finishes.
Crestakyd® 30-9502 Scott Bader Crestakyd® 30-9502 is a short oil, air-drying, chain-stopped alkyd derived from linoleic-rich fatty acids and supplied in a 3:2 w/w blend of xylene:methoxy propanol. It displays high solids content - which helps to ensure VOC compliance in final formulati...展开 Crestakyd® 30-9502 is a short oil, air-drying, chain-stopped alkyd derived from linoleic-rich fatty acids and supplied in a 3:2 w/w blend of xylene:methoxy propanol. It displays high solids content - which helps to ensure VOC compliance in final formulations - and excellent salt spray resistance. This product is ideal for use in low VOC industrial applications such as air-drying topcoats, DTM primers, one coat primer systems, and paints. 收起
Crestakyd® 41-5009 Scott Bader Crestakyd® 41-5009 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils in xylene. This product is ideal for use in air-dried and low-bake general purpose finishes as well as quick-drying primers, enamels, and hammer fi...展开 Crestakyd® 41-5009 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils in xylene. This product is ideal for use in air-dried and low-bake general purpose finishes as well as quick-drying primers, enamels, and hammer finishes. 收起
Crestakyd® 41-5013 Scott Bader Crestakyd® 41-5013 is a styrene-modified epoxy ester, consisting of a mix of non-yellowing oils and supplied in xylene. It provides excellent chemical and corrosion resistance. This product is recommended for use in air-drying and stoving coatings for che...展开 Crestakyd® 41-5013 is a styrene-modified epoxy ester, consisting of a mix of non-yellowing oils and supplied in xylene. It provides excellent chemical and corrosion resistance. This product is recommended for use in air-drying and stoving coatings for chemical plants, industrial surface primers, and automobile primers. 收起
Crestakyd® 41-6010 Scott Bader Crestakyd® 41-6010 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils and supplied as a solution in high-boiling aromatic solvents. It displays high levels of cohesion, adhesion, and flexibility. This product is ideal...展开 Crestakyd® 41-6010 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils and supplied as a solution in high-boiling aromatic solvents. It displays high levels of cohesion, adhesion, and flexibility. This product is ideal for use in air-dry, low-bake, and general purpose industrial stoving paints, as well as enamels, primers, and hammer finishes. 收起
Crestakyd® 44-5014 Scott Bader Crestakyd® 44-5014 is a rosin- and phenolic-modified, short oil, air-drying alkyd derived from a combination of linoleic and tung oils and supplied as a solution in xylene. It displays fast drying, exceptional adhesion, and excellent chemical resistance. ...展开 Crestakyd® 44-5014 is a rosin- and phenolic-modified, short oil, air-drying alkyd derived from a combination of linoleic and tung oils and supplied as a solution in xylene. It displays fast drying, exceptional adhesion, and excellent chemical resistance. This product is ideal for use in non-lifting primers, nitorcellulose lacquers, alkyd finishes, petrol- and oil-resistant paints, machinery finishes, and quick-drying automotive primers. 收起
Crestakyd® 44-5027 Scott Bader Crestakyd® 44-5027 is a rosin- and phenolic-modified, short oil alkyd that displays rapid drying, high resistance to water, fuels, and oil, and good flexibility and adhesion to metallic substrates. This product is ideal for use in fast-drying primers that...展开 Crestakyd® 44-5027 is a rosin- and phenolic-modified, short oil alkyd that displays rapid drying, high resistance to water, fuels, and oil, and good flexibility and adhesion to metallic substrates. This product is ideal for use in fast-drying primers that can be over-coated with nitrocellulose and other finishes. 收起
Crestakyd® 44-5043 Scott Bader Crestakyd® 44-5043 is a rosin- and phenolic-modified short oil alkyd, supplied as a 60% non-volatile solution in xylene. This product is designed for use in fast-drying industrial primer applications.
Curox® I-200 UNITED INITIATORS GMBH & CO KG Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起
Curox® I-300 UNITED INITIATORS GMBH & CO KG Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起
Curox® M-100 UNITED INITIATORS GMBH & CO KG Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-102 UNITED INITIATORS GMBH & CO KG Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-103 UNITED INITIATORS GMBH & CO KG Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-104 UNITED INITIATORS GMBH & CO KG Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-180 UNITED INITIATORS GMBH & CO KG Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...展开 Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起
Curox® M-200 UNITED INITIATORS GMBH & CO KG Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-202 UNITED INITIATORS GMBH & CO KG Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-300 UNITED INITIATORS GMBH & CO KG Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-302 UNITED INITIATORS GMBH & CO KG Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-302R UNITED INITIATORS GMBH & CO KG Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-303 UNITED INITIATORS GMBH & CO KG Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-303R UNITED INITIATORS GMBH & CO KG Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...展开 Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-312 UNITED INITIATORS GMBH & CO KG Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-312R UNITED INITIATORS GMBH & CO KG Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-340 UNITED INITIATORS GMBH & CO KG Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-403 UNITED INITIATORS GMBH & CO KG Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起
Curox® MCH UNITED INITIATORS GMBH & CO KG Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...展开 Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® VP-160A UNITED INITIATORS GMBH & CO KG Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins...展开 Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins, coatings, and Novolac resins at ambient temperature. 收起
HA-V204 Qingdao Xinyutian Chemical Co., Ltd. HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V209 Qingdao Xinyutian Chemical Co., Ltd. HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V220 Qingdao Xinyutian Chemical Co., Ltd. HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起
HAV-216 Qingdao Xinyutian Chemical Co., Ltd. HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
HAV-228 Qingdao Xinyutian Chemical Co., Ltd. HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
Norox® KP-925H UNITED INITIATORS GMBH & CO KG Norox® KP-925H, in the form of a clear liquid, is a methyl ethyl ketone peroxide composition formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, gel coats, and corrosion resistant structures. ...展开 Norox® KP-925H, in the form of a clear liquid, is a methyl ethyl ketone peroxide composition formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, gel coats, and corrosion resistant structures. It is also a good cure initiator for both vinyl ester resins and unsaturated polyester resins. 收起
Norox® KP-9H UNITED INITIATORS GMBH & CO KG Norox® KP-9H, in the form of a clear colorless liquid, is a methyl ethyl ketone peroxide in phlegmatizer for the curing of unsaturated polyester resins at ambient temperature in grouping with cobalt accelerators. It gives consistent room temperature perfo...展开 Norox® KP-9H, in the form of a clear colorless liquid, is a methyl ethyl ketone peroxide in phlegmatizer for the curing of unsaturated polyester resins at ambient temperature in grouping with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEC UNITED INITIATORS GMBH & CO KG Norox® MEC, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature cond...展开 Norox® MEC, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins. 收起
Norox® MEC FRED UNITED INITIATORS GMBH & CO KG Norox® MEC FRED, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature...展开 Norox® MEC FRED, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins. 收起
Norox® MEC RED UNITED INITIATORS GMBH & CO KG Norox® MEC RED, in the form of a colorless liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer. It was developed to give good sure performance in low and average temperature conditions when used as an initiator...展开 Norox® MEC RED, in the form of a colorless liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer. It was developed to give good sure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins and gel coats. 收起
Norox® MEKP-9 UNITED INITIATORS GMBH & CO KG Norox® MEKP-9, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperatur...展开 Norox® MEKP-9, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEKP-9 FRED UNITED INITIATORS GMBH & CO KG Norox® MEKP-9 FRED, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room tempe...展开 Norox® MEKP-9 FRED, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEKP-9 RED UNITED INITIATORS GMBH & CO KG Norox® MEKP-9 RED, in the form of a red liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It gives consistent room temperature performance as a curing agent for both gel coats and resins.
Norox® MEKP-925H UNITED INITIATORS GMBH & CO KG Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas gen...展开 Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, corrosion resistant structures, and gel coats. 收起