UL Prospector

成功!

成功保存搜索结果
Anatase TiO2 HTA-120 Yunnan Dahutong Industry & Trading Co., Ltd. Anatase TiO2 HTA-120 is a white powder product. This product has a molecular weight of 79.9 and pH value between 6.8 and 8.0. Anatase TiO2 HTA-120 is used in internal wall emulsion paint, printing ink, paper making, rubber products, coating, plastic, and ...展开 Anatase TiO2 HTA-120 is a white powder product. This product has a molecular weight of 79.9 and pH value between 6.8 and 8.0. Anatase TiO2 HTA-120 is used in internal wall emulsion paint, printing ink, paper making, rubber products, coating, plastic, and paint. 收起
Anatase TiO2 HTA-121 Yunnan Dahutong Industry & Trading Co., Ltd. Anatase TiO2 HTA-121 is a white powder product. This product has a molecular weight of 79.9, oil absorption value of 21 g/100g, and pH value between 6.8 and 8.0. Anatase TiO2 HTA-121 is used in internal wall emulsion paint, printing ink, paper making, rub...展开 Anatase TiO2 HTA-121 is a white powder product. This product has a molecular weight of 79.9, oil absorption value of 21 g/100g, and pH value between 6.8 and 8.0. Anatase TiO2 HTA-121 is used in internal wall emulsion paint, printing ink, paper making, rubber products, coating, plastic, and paint. 收起
Anatase TiO2 HTA-200 Yunnan Dahutong Industry & Trading Co., Ltd. Anatase TiO2 HTA-200 is a powder base product that is white in color. This product has a pH value between 6.8-7.3 and iron content of 40 ppm. Anatase TiO2 HTA-200 is commonly used in a variety of applications including paint and coatings, graphic arts an...展开 Anatase TiO2 HTA-200 is a powder base product that is white in color. This product has a pH value between 6.8-7.3 and iron content of 40 ppm. Anatase TiO2 HTA-200 is commonly used in a variety of applications including paint and coatings, graphic arts and inks, and more. 收起
Anatase TiO2 HTA-201 Yunnan Dahutong Industry & Trading Co., Ltd. Anatase TiO2 HTA-201 is fine gloss product that is white in color. This product has pH value of water suspension between 6.8 - 7.3. Anatase TiO2 HTA-201 is used in a variety of applications including paint and coatings, graphic arts and inks, and more.
C-2090 Qingdao Xinyutian Chemical Co., Ltd. C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials.
C-2390 Qingdao Xinyutian Chemical Co., Ltd. C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials.
C-3090 Qingdao Xinyutian Chemical Co., Ltd. C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
C-6090 Qingdao Xinyutian Chemical Co., Ltd. C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) CENOTEC Co., Ltd. CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起
CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) CENOTEC Co., Ltd. CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings.
CENOBEADS™ CZS (Zirconium Silicate Bead) CENOTEC Co., Ltd. CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings.
CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) CENOTEC Co., Ltd. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起
CenoFlour CENOTEC Co., Ltd. CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings.
CenoSilicate (Premium) CENOTEC Co., Ltd. CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint.
CenoSilicate (Ultra Premium) CENOTEC Co., Ltd. CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes.
DOWSIL™ 100F Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...展开 Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. 收起
DOWSIL™ 102F Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...展开 Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. 收起
DOWSIL™ 108F Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...展开 Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. 收起
DOWSIL™ 11 Additive Dow Performance Silicones Paints, Inks and Coatings 硅树脂添加剂,用于溶剂型涂装时具备滑爽性和流平性。
DOWSIL™ 14 Additive Dow Performance Silicones Paints, Inks and Coatings 硅树脂添加剂,用于水性和溶剂型涂装时具备滑爽性和流平性,用于水性体系时具备耐划伤性。
DOWSIL™ 163 Additive Dow Performance Silicones Paints, Inks and Coatings 用于溶剂型和UV涂料以及溶剂型和水性油墨的泡沫控制添加剂。
DOWSIL™ 18 Additive Dow Performance Silicones Paints, Inks and Coatings 高分子量聚二甲基硅氧烷分散体。用于树脂和极性溶剂等极性体系的一种独特的分散载体。
DOWSIL™ 204SL Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether co...展开 Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. 收起
DOWSIL™ 205SL Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...展开 Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. 收起
DOWSIL™ 210S Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...展开 Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. 收起
DOWSIL™ 23 N Additive Dow Performance Silicones Paints, Inks and Coatings
DOWSIL™ 2405 Resin Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as Dow Corning® US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited...展开 Dow Corning® 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as Dow Corning® US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibility with organic binders. It is compatible with or soluble in classical solvents (butyl acetate or xylene). 收起
DOWSIL™ 27 Additive Dow Performance Silicones Paints, Inks and Coatings 无电抗性甘醇硅氧烷表面活性剂,兼具硅氧烷和有机物的特点。主要用于降低摩擦系数。
DOWSIL™ 29 Additive Dow Performance Silicones Paints, Inks and Coatings 甲醇官能硅树脂乙二醇表面活性剂,用来改善流平和润湿性,提高光泽度。
DOWSIL™ 3 Additive Dow Performance Silicones Paints, Inks and Coatings 硅烷醇官能性硅树脂,用于颜料处理并改善流平。
DOWSIL™ 3037 Intermediate Dow Performance Silicones Paints, Inks and Coatings 甲氧基官能低分子量硅树脂,用于可烘干卷材涂料和高温涂装表面涂料。抗粉化和褪色;保持光泽度和色彩;良好的耐侯性和耐热性。
DOWSIL™ 3055 Resin Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crossli...展开 Dow Corning® 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker to improve the physical properties and long-term performance of paints and coatings. 收起
DOWSIL™ 3074 Intermediate Dow Performance Silicones Paints, Inks and Coatings 一种甲氧基官、能低分子量硅树脂反应性中间体。用于卷材涂料、器具面漆及高温应用领域。
DOWSIL™ 33 Additive Dow Performance Silicones Paints, Inks and Coatings 水性硅树脂弹性体悬浮液-提供涂层的触觉特性,能够赋予水性塑料涂料以柔软的手感;为聚丙烯酸和聚氨酯木器漆提供平滑的表面效果。
DOWSIL™ 401LS Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...展开 Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起
DOWSIL™ 402LS Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...展开 Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起
DOWSIL™ 500W Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起
DOWSIL™ 501W Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起
DOWSIL™ 502W Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起
DOWSIL™ 51 Additive Dow Performance Silicones Paints, Inks and Coatings 水分散型超高分子量聚二甲基硅树脂分散体,具有滑爽性和耐划伤性。
DOWSIL™ 52 Additive Dow Performance Silicones Paints, Inks and Coatings 一种低粘度, 可流动性助剂,用于提高耐划伤性和滑爽性,用于含极性溶剂的水性和溶剂型涂料。使水性涂料具有耐水性;并赋予涂料流平性、润湿性和光泽度。
DOWSIL™ 54 Additive Dow Performance Silicones Paints, Inks and Coatings 一种100%活性份的硅树脂乙二醇共聚物,应用在油墨中可起到滑爽、耐划伤和改善流平的作用。
DOWSIL™ 55 Additive Dow Performance Silicones Paints, Inks and Coatings 硅树脂乙二醇共聚物,赋予水性涂料以滑爽性、耐划伤性和流平性。
DOWSIL™ 56 Additive Dow Performance Silicones Paints, Inks and Coatings 硅氧烷添加剂,消除溶剂型体系中的微泡沫,并作为流平助剂。
DOWSIL™ 57 Additive Dow Performance Silicones Paints, Inks and Coatings 用于油墨和涂料的添加剂,用来改善流平、提高摩擦系数、增强耐划伤性、光泽度和颜料分散性。
DOWSIL™ 61 Paint Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...展开 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone 收起
DOWSIL™ 62 Additive Dow Performance Silicones Paints, Inks and Coatings 用于油墨和涂料涂装的水性硅树脂防泡剂。
DOWSIL™ 67 Additive Dow Performance Silicones Paints, Inks and Coatings 用于水性涂料的硅树脂润湿剂。特点是低黏度、低表面张力,具有良好的扩散性和润湿性,高闪点,溶于水。
DOWSIL™ 68 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints.
DOWSIL™ 7 Additive Dow Performance Silicones Paints, Inks and Coatings 用于溶剂型油墨和涂料的泡沫控制和流平/润湿助剂。
DOWSIL™ 700P Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze...展开 Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. 收起
DOWSIL™ 71 Additive Dow Performance Silicones Paints, Inks and Coatings 对水性涂料有效的泡沫控制;低浓度应用,不含憎水粒子,高剪切混合下稳定。特别用于水性油墨,有效的泡沫控制和良好的表面外观之间的平衡性较好。
DOWSIL™ 74 Additive Dow Performance Silicones Paints, Inks and Coatings 硅氧烷聚合物泡沫控制剂。
DOWSIL™ 84 Additive Dow Performance Silicones Paints, Inks and Coatings 一种用于水性油墨的硅树脂添加剂。
DOWSIL™ 85 Additive Dow Performance Silicones Paints, Inks and Coatings 一种用于水性油墨的硅树脂添加剂。
DOWSIL™ 8526 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling ag...展开 Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. 收起
DOWSIL™ 8590 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...展开 Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. 收起
DOWSIL™ 8590 Additive Dow Performance Silicones Paints, Inks and Coatings DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起
DOWSIL™ 8603 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styr...展开 Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. 收起
DOWSIL™ 8621 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起
DOWSIL™ 8628 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起
DOWSIL™ 87 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings.
DOWSIL™ 88 Additive Dow Performance Silicones Paints, Inks and Coatings Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...展开 Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. 收起
DOWSIL™ RSN-0217 Flake Resin Dow Performance Silicones Paints, Inks and Coatings 作为粉末或液体涂料的主体树脂或与有机树脂一起作为联合树脂,用来提高热稳定性和耐侯性。
DOWSIL™ RSN-0220 Flake Resin Dow Performance Silicones Paints, Inks and Coatings 100%羟基官能硅树脂,用于粉末和液体涂料的主体树脂。
DOWSIL™ RSN-0233 Flake Resin Dow Performance Silicones Paints, Inks and Coatings 100%羟基官能硅树脂,用于粉末和液体涂料的主体树脂。
DOWSIL™ RSN-0249 Flake Resin Dow Performance Silicones Paints, Inks and Coatings Dow Corning® RSN-0249 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability.
DOWSIL™ RSN-0255 Flake Resin Dow Performance Silicones Paints, Inks and Coatings Dow Corning® RSN-0255 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability.
DOWSIL™ RSN-0409 HS Resin Dow Performance Silicones Paints, Inks and Coatings 80%固含量,羟基官能硅树脂,用于液体涂料。
DOWSIL™ RSN-0431 HS Resin Dow Performance Silicones Paints, Inks and Coatings 80%固含量,羟基官能硅树脂,用于液体涂料。
DOWSIL™ RSN-0804 Resin Dow Performance Silicones Paints, Inks and Coatings 硅烷醇官能性树脂,以溶液形式供货,具有出色的悬浮性、抗溶剂性、光泽保持力和高温防护作用。
DOWSIL™ RSN-0805 Resin Dow Performance Silicones Paints, Inks and Coatings 硅烷醇官能性树脂,用于保养漆、着色烘干瓷漆和装饰面漆。
DOWSIL™ RSN-0806 Resin Dow Performance Silicones Paints, Inks and Coatings 用于空气加热器、烘干炉等的有色烘干瓷漆。单独使用或与Dow Corning® 805树脂混合使用,提高中间体硬度。
DOWSIL™ RSN-0808 Resin Dow Performance Silicones Paints, Inks and Coatings 推荐用于空气加热器、焚化装置、干衣机、烘干炉等的装饰表面涂层,满足温度高达540℃时的出色的色彩和光泽保持力的要求。
DOWSIL™ RSN-0840 Resin Dow Performance Silicones Paints, Inks and Coatings 溶于甲苯的硅树脂,具有出色的悬浮特性、光泽保持力和高温防护性。
DOWSIL™ RSN-6018 Resin Intermediate Dow Performance Silicones Paints, Inks and Coatings Dow Corning® RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins mo...展开 Dow Corning® RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modified with this product show improved heat stability and weatherability over unmodified resins. 收起
DOWSIL™ US-CF 2403 Resin Dow Performance Silicones Paints, Inks and Coatings Dow Corning® US-CF 2403 Resin is a methyl-methoxy functional, solvent-less and low molecular weight liquid siloxane. It can be used as a sole binder or in combination with organic resins, in both clear and pigmented formulations.
DOWSIL™ Z-6121 Silane Dow Performance Silicones Paints, Inks and Coatings 提高溶剂型涂料的附着力,提供颜料处理。
DOWSIL™ Z-6137 Silane Dow Performance Silicones Paints, Inks and Coatings 附着力促进剂可作为添加剂或底层涂料用于水性体系,用来提高有机主体树脂和无机基材之间的结合力。
Fujicure 205-L Sanho Chemical Co., Ltd. Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications.
Fujicure 4030 Sanho Chemical Co., Ltd. Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications.
Fujicure 4200 Sanho Chemical Co., Ltd. Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications.
Fujicure 4233 Sanho Chemical Co., Ltd. Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulatio...展开 Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulation applications. 收起
Fujicure 5000 Sanho Chemical Co., Ltd. Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起
Fujicure 5003 Sanho Chemical Co., Ltd. Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation app...展开 Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation applications. 收起
Fujicure 5003-D Sanho Chemical Co., Ltd. Fujicure 5003-D is a modified cycloaliphatic amine in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.10. Fujicure 5003-D is most commonly used in coating formulation applications.
Fujicure 5250 Sanho Chemical Co., Ltd. Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications.
Fujicure 5260 Sanho Chemical Co., Ltd. Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起
Fujicure 5300 Sanho Chemical Co., Ltd. Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起
Fujicure 5420 Sanho Chemical Co., Ltd. Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起
Fujicure FX-220 Sanho Chemical Co., Ltd. Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起
Fujicure FXD-821 Sanho Chemical Co., Ltd. Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起
Fujicure FXD-822 Sanho Chemical Co., Ltd. Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起
Fujicure FXK-832 Sanho Chemical Co., Ltd. Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications.
Fujicure FXM-823B Sanho Chemical Co., Ltd. Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起
Fujicure FXM-824A Sanho Chemical Co., Ltd. Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coating formulation applications. 收起
Fujicure FXM-824B Sanho Chemical Co., Ltd. Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起
Fujicure FXR-1020 Sanho Chemical Co., Ltd. Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications.
Fujicure FXR-1030 Sanho Chemical Co., Ltd. Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications.
Fujicure FXR-1081 Sanho Chemical Co., Ltd. Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications.