UL Prospector

成功!

成功保存搜索结果
Antioxidant SN-1 Tiarco Chemical Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起
C-2090 Qingdao Xinyutian Chemical Co., Ltd. C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials.
C-2390 Qingdao Xinyutian Chemical Co., Ltd. C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials.
C-3090 Qingdao Xinyutian Chemical Co., Ltd. C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
C-6090 Qingdao Xinyutian Chemical Co., Ltd. C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials.
Cobalt Green P2050 Dongguan Hailerui Chemical Co., Ltd. Cobalt Green P2050 is an inorganic pigment that appears as a green powder. This product has an oil absorption of 16-20 and a pH value of 8.1. It can be used in traffic paint and industrial coatings.
Copper Chromite Black P2028 Dongguan Hailerui Chemical Co., Ltd. Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints.
HA-V204 Qingdao Xinyutian Chemical Co., Ltd. HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V209 Qingdao Xinyutian Chemical Co., Ltd. HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起
HA-V220 Qingdao Xinyutian Chemical Co., Ltd. HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起
HAV-216 Qingdao Xinyutian Chemical Co., Ltd. HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
HAV-228 Qingdao Xinyutian Chemical Co., Ltd. HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起
Hailerui Cadmium Red P2018 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks.
Hailerui Cadmium Yellow P2037-1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-5 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cobalt Blue P2008 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cobalt Blue P2008 is an inorganic pigment that appears as a bright blue powder. This product has an oil absorption of 18-25 g/100g and a pH value of 7.5. It can be used in paints and industrial coatings.
Hailerui Permanent Violet P.V.23BL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Permanent Violet P.V.23RL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Phthalocyanine Blue P.B.15:0 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:2 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:3 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Green PG7 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste.
Hailerui Titanium Yellow 42-118A Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001FG Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow TY-300 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Ultramarine Blue 5008 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-19 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-25 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-37 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue GP-58 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-05 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-06 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Octocure 462 Tiarco Chemical Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber.
Octocure 487 Tiarco Chemical Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起
Octocure 530 Tiarco Chemical Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起
Octocure 551 Tiarco Chemical Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起
Octocure 573 Tiarco Chemical Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber.
Octocure 803 Tiarco Chemical Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber.
Octocure ZBZ-42 Tiarco Chemical Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起
Octocure ZDB-100 Tiarco Chemical Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起
Octocure ZDB-50 Tiarco Chemical Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起
Octocure ZDB-50 CF Tiarco Chemical Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起
Octocure ZDE-50 Tiarco Chemical Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起
Octocure ZDIB-50 Tiarco Chemical Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起
Octocure ZDM-50 Tiarco Chemical Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octocure ZMBT-50 Tiarco Chemical Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octocure ZMBT-50 CF Tiarco Chemical Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octoguard FR-11 DF Tiarco Chemical Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起
Octoguard FR-13 DF Tiarco Chemical Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起
Octolite 424-50 Tiarco Chemical Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起
Octolite 497 Tiarco Chemical Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起
Octolite 544 CF Tiarco Chemical Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起
Octolite 640 Tiarco Chemical Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起
Octolite 647 Tiarco Chemical Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起
Octolite 668 Tiarco Chemical Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起
Octolite 806 Tiarco Chemical Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起
Octolite 809 Tiarco Chemical Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起
Octolite AO-50 Tiarco Chemical Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起
Octolite WL Tiarco Chemical Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起
Octopol NB-47 Tiarco Chemical Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起
Octosol 449 Tiarco Chemical Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起
Octosol 571 Tiarco Chemical Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起
Octosol 687 Tiarco Chemical Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起
Octosol 730 Tiarco Chemical Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起
Octosol 731 Tiarco Chemical Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起
Octosol 828 Tiarco Chemical Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起
Octosol 853 Tiarco Chemical Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起
Octosol A-18 Tiarco Chemical Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起
Octosol A-18A Tiarco Chemical Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起
Octosol ALS Tiarco Chemical Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems.
Octosol SLS Tiarco Chemical Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起
Octosol SLS-30K Tiarco Chemical Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起
Octosperse 425 Tiarco Chemical Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起
Octosperse 428 Tiarco Chemical Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. 收起
Octosperse TS-10 Tiarco Chemical Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. 收起
Octosperse TS-30 Tiarco Chemical Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. 收起
Octotint 120 Tiarco Chemical Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in th...展开 Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in the rubber latex industry as a bluing agent, applied in very low percentages to intensify whiteness by offsetting yellowish undertones. 收起
Octotint 435 Tiarco Chemical Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing an...展开 Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing and useful color characteristics both in masstone and tint. Its pigment sources display high tinting strength and hiding power. Because it is water-based, dispersibility into a latex system is greatly enhanced while demonstrating excellent handling properties. 收起
Octotint 725 Tiarco Chemical Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated ...展开 Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated for direct addition into most latex-based compounds, thus providing the compounder with a ready-to-use, pourable form of TiO2 with improved dispersion properties. 收起
Octotint 790 Tiarco Chemical Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起
Octowax 1500 Tiarco Chemical Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining a...展开 Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 1500 is designed to be added directly to latex compounds. 收起
Octowax 17 Tiarco Chemical Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-s...展开 Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 17 is designed to be added directly to latex compounds. 收起
Octowax 321 Tiarco Chemical Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought ab...展开 Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought about by the addition of this type of wax emulsion to latex. Octowax 321 is designed to be added directly to latex compounds. 收起
Octowax 5 Tiarco Chemical Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining anti...展开 Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 5 is designed to be added directly to latex compounds. 收起
Octowax MR-40 Tiarco Chemical Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowa...展开 Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowax MR-40 is suggested for use as a mold-release and lubricant. 收起
Octowet 70 Tiarco Chemical Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70D Tiarco Chemical Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...展开 Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70MS Tiarco Chemical Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70PG Tiarco Chemical Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. 收起
Octowet 70X Tiarco Chemical Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75 Tiarco Chemical Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75PG Tiarco Chemical Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...展开 Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75X Tiarco Chemical Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
POL-1125 Qingdao Xinyutian Chemical Co., Ltd. POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起
POL-1180 Qingdao Xinyutian Chemical Co., Ltd. POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起
POL-123 Qingdao Xinyutian Chemical Co., Ltd. POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起