| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...展开 Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. 收起 | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...展开 Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. 收起 | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...展开 DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 收起 | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...展开 Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. 收起 | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于溶剂型涂装时具备滑爽性和流平性。 | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于水性和溶剂型涂装时具备滑爽性和流平性，用于水性体系时具备耐划伤性。 | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型和UV涂料以及溶剂型和水性油墨的泡沫控制添加剂。 | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | 高分子量聚二甲基硅氧烷分散体。用于树脂和极性溶剂等极性体系的一种独特的分散载体。 | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether co...展开 Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. 收起 | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...展开 Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. 收起 | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...展开 Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. 收起 | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...展开 DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. 收起 | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | ||
| DOWSIL™ 2405 Resin | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as Dow Corning® US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited...展开 Dow Corning® 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as Dow Corning® US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibility with organic binders. It is compatible with or soluble in classical solvents (butyl acetate or xylene). 收起 | |
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | 无电抗性甘醇硅氧烷表面活性剂，兼具硅氧烷和有机物的特点。主要用于降低摩擦系数。 | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | 甲醇官能硅树脂乙二醇表面活性剂，用来改善流平和润湿性，提高光泽度。 | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅烷醇官能性硅树脂，用于颜料处理并改善流平。 | |
| DOWSIL™ 3037 Intermediate | Dow Performance Silicones Paints, Inks and Coatings | 甲氧基官能低分子量硅树脂，用于可烘干卷材涂料和高温涂装表面涂料。抗粉化和褪色；保持光泽度和色彩；良好的耐侯性和耐热性。 | |
| DOWSIL™ 3055 Resin | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crossli...展开 Dow Corning® 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker to improve the physical properties and long-term performance of paints and coatings. 收起 | |
| DOWSIL™ 3074 Intermediate | Dow Performance Silicones Paints, Inks and Coatings | 一种甲氧基官、能低分子量硅树脂反应性中间体。用于卷材涂料、器具面漆及高温应用领域。 | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水性硅树脂弹性体悬浮液-提供涂层的触觉特性，能够赋予水性塑料涂料以柔软的手感；为聚丙烯酸和聚氨酯木器漆提供平滑的表面效果。 | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...展开 Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...展开 DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...展开 Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水分散型超高分子量聚二甲基硅树脂分散体，具有滑爽性和耐划伤性。 | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种低粘度, 可流动性助剂，用于提高耐划伤性和滑爽性，用于含极性溶剂的水性和溶剂型涂料。使水性涂料具有耐水性；并赋予涂料流平性、润湿性和光泽度。 | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种100%活性份的硅树脂乙二醇共聚物，应用在油墨中可起到滑爽、耐划伤和改善流平的作用。 | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂乙二醇共聚物，赋予水性涂料以滑爽性、耐划伤性和流平性。 | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷添加剂，消除溶剂型体系中的微泡沫，并作为流平助剂。 | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料的添加剂，用来改善流平、提高摩擦系数、增强耐划伤性、光泽度和颜料分散性。 | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...展开 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone 收起 | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料涂装的水性硅树脂防泡剂。 | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于水性涂料的硅树脂润湿剂。特点是低黏度、低表面张力，具有良好的扩散性和润湿性，高闪点，溶于水。 | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型油墨和涂料的泡沫控制和流平/润湿助剂。 | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze...展开 Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. 收起 | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | 对水性涂料有效的泡沫控制；低浓度应用，不含憎水粒子，高剪切混合下稳定。特别用于水性油墨，有效的泡沫控制和良好的表面外观之间的平衡性较好。 | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷聚合物泡沫控制剂。 | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling ag...展开 Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...展开 Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. 收起 | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styr...展开 Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. 收起 | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...展开 Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. 收起 | |
| DOWSIL™ RSN-0217 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | 作为粉末或液体涂料的主体树脂或与有机树脂一起作为联合树脂，用来提高热稳定性和耐侯性。 | |
| DOWSIL™ RSN-0220 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | 100%羟基官能硅树脂，用于粉末和液体涂料的主体树脂。 |
