| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| Densil™ DF Antimicrobial | Arxada | Densil™ DF抗菌剂，用于表面涂料的干膜保护。它是一种广谱杀菌剂/杀藻剂，用于水性表面涂料的干膜保护。 | |
| Densil™ DG20 Antimicrobial | Arxada | 对抵抗真菌、细菌、藻类和酵母具有广谱活性。它可应用于许多不同场合领域提供干膜和湿状态下的防霉 | |
| Densil™ DN Antimicrobial | Arxada | Densil™ DN抗菌剂，广谱性抗真菌，藻类，酵母和细菌活性。它可用在许多不同的应用领域提供干膜和湿态下的保存。 | |
| Densil™ FAZ Antimicrobial | Arxada | Densil™ FAZ抗菌剂是一种三活性混合物，用于外墙漆和涂料配方中。与我们的Zinc Omadine™ ZOE™产品一样，它包含Zinc Omadine并使用了专利色彩稳定技术。Densil™ FAZ的基本概念是再度通过具有更好水溶性的杀真菌剂补充Zinc Omadine的耐久性，长期、慢淋、低水溶解度性能。Densil™ FAZ还包含补充除藻剂以达到完整的干膜防护效果。 | |
| Densil® FZ Antimicrobial | Arxada | Densil® FZ Antimicrobial is a broad spectrum dual-active for the dry-film protection of aqueous based surface coatings. Like our Zinc Omadine ZOE® product, it contains Zinc Omadine® antimicrobial and it uses the same transchelation suppression technology....展开 Densil® FZ Antimicrobial is a broad spectrum dual-active for the dry-film protection of aqueous based surface coatings. Like our Zinc Omadine ZOE® product, it contains Zinc Omadine® antimicrobial and it uses the same transchelation suppression technology. The basic concept of Densil® FZ Antimicrobial is to compliment the durable, long-term slow leaching, low water solubility properties of Zinc Omadine® antimicrobial with a secondary more water soluble fungicide. Densil® FZ Antimicrobial is registered with the Environmental Protection Agency and has been granted EPA registration No. 6836-443. This product is not available in Canada. 收起 | |
| Densil® ZOD Antimicrobial | Arxada | Densil™ ZOD杀菌剂是一种三活性混合物，用于外墙漆和涂料配方中。与我们的Zinc Omadine™ ZOE™产品一样，它包含Zinc Omadine并使用了专利色彩稳定技术。Densil™ FAZ的基本概念是再次通过具有更好水溶性的杀真菌剂补充Zinc Omadine的耐久性，长期、慢淋、低水溶解度性能。Densil™ ZOD也包含补充除藻剂以达到完整的干膜防护效果。 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| GH-1151 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1151 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 180°C. This product has good flow and excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1152 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1152 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 180°C. This product has high gloss and excellent flow, and it is commonly used in powder coatings. | |
| GH-1153 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1153 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 180°C. This product has high gloss, good mechanical properties and excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1155 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1155 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 180°C. This product has good flow, good mechanical properties, excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1156 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1156 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 180°C. This product has high gloss, good mechanical properties, excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1157 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1157 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 130°C. This product has high gloss, good mechanical properties, good flow, and it is commonly used in powder coatings. | |
| GH-1158 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1158 is a saturated carboxylated polyester resin that is designed for 50/50 hybrid powders to be cured at 160°C. This product has good mechanical properties and good flow, and it is commonly used in powder coatings. | |
| GH-1161 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1161 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has good mechanical properties and good flow, and it is commonly used in powder coatings. | |
| GH-1161A | ZheJiang GuangHua New Materials Co., Ltd. | GH-1161A is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has good mechanical properties and high gloss, and it is commonly used in powder coatings. | |
| GH-1162 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1162 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has excellent mechanical properties and over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1163 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1163 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has high gloss and excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1165 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1165 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has high gloss and good mechanical properties, and it is commonly used in powder coatings. | |
| GH-1166 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1166 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has good boiling water resistance and good mechanical properties, and it is commonly used in powder coatings. | |
| GH-1167 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1167 is a saturated carboxylated polyester resin that is designed for 60/40 hybrid powders to be cured at 180°C. This product has excellent over-baking resistance and high gloss, and it is commonly used in powder coatings. | |
| GH-1171 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1171 is a saturated carboxylated polyester resin that is designed for 70/30 hybrid powders to be cured at 180°C. This product has good flexibility and high gloss, and it is commonly used in powder coatings. | |
| GH-1172 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1172 is a saturated carboxylated polyester resin that is designed for 70/30 hybrid powders to be cured at 170°C. This product has fast curing speed and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1173 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1173 is a saturated carboxylated polyester resin that is designed for 70/30 hybrid powders to be cured at 180°C. This product has medium curing speed and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-1175 | ZheJiang GuangHua New Materials Co., Ltd. | GH-1175 is a saturated carboxylated polyester resin that is designed for 70/30 hybrid powders to be cured at 180°C. This product has low curing speed and high gloss, and it is commonly used in powder coatings. | |
| GH-2201 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2201 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has very good durable ability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2202 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2202 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has very good durable ability and excellent boiling water resistance, and it is commonly used in powder coatings. | |
| GH-2203 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2203 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has very good durable ability and good salt-spray resistance, and it is commonly used in powder coatings. | |
| GH-2204 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2204 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has medium curing speed and excellent over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2205 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2205 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has excellent flow and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2205A | ZheJiang GuangHua New Materials Co., Ltd. | GH-2205A is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has very good durable ability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2206 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2206 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has very good durable ability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2207 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2207 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has good sanding finish and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2208 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2208 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has good chemical and over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2208A | ZheJiang GuangHua New Materials Co., Ltd. | GH-2208A is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has good chemical and over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2209 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2209 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has gas-oven resistance and very good durable ability, and it is commonly used in powder coatings. | |
| GH-2211 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2211 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 190°C. This product has good chemical resistance and very good durable ability, and it is commonly used in powder coatings. | |
| GH-2212 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2212 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 180°C. This product has good over-baking resistance and very good durable ability, and it is commonly used in powder coatings. | |
| GH-2214 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2214 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 180°C. This product has good over-baking resistance and very good durable ability, and it is commonly used in powder coatings. | |
| GH-2221 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2221 is a saturated carboxylated polyester resin that is designed for 94/6 TGIC powders to be cured at 200°C. This product has good flow and excellent flexibility, and it is commonly used in powder coatings. | |
| GH-2222 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2222 is a saturated carboxylated polyester resin that is designed for 94/6 TGIC powders to be cured at 200°C. This product has good flow and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-2223 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2223 is a saturated carboxylated polyester resin that is designed for 94/6 TGIC powders to be cured at 200°C. This product has good flexibility and excellent mechanical properties, and it is commonly used in powder coatings. | |
| GH-2225 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2225 is a saturated carboxylated polyester resin that is designed for 94/6 TGIC powders to be cured at 200°C. This product has outstanding flexibility and good flow, and it is commonly used in powder coatings. | |
| GH-2226 | ZheJiang GuangHua New Materials Co., Ltd. | GH-2226 is a saturated carboxylated polyester resin that is designed for 94/6 TGIC powders to be cured at 200°C. This product has excellent matting effect and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-3301 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3301 is a saturated carboxylated polyester resin that is designed for 96.5/3.5 Primid powders to be cured at 200°C. This product has low hardener demand and outstanding mechanical properties, and it is commonly used in powder coatings. | |
| GH-3320 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3320 is a saturated carboxylated polyester resin that is designed for 95/5 Primid powders to be cured at 180°C. This product has very good flexibility and good durable ability, and it is commonly used in powder coatings. | |
| GH-3321 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3321 is a saturated carboxylated polyester resin that is designed for 95/5 Primid powders to be cured at 180°C. This product has good over-baking resistance and good durable ability, and it is commonly used in powder coatings. | |
| GH-3322 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3322 is a saturated carboxylated polyester resin that is designed for 95/5 Primid powders to be cured at 180°C. This product has good over-baking resistance and good durable ability, and it is commonly used in powder coatings. | |
| GH-3323 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3323 is a saturated carboxylated polyester resin that is designed for 95/5 Primid powders to be cured at 180°C. This product has good weathering resistance and good flow, and it is commonly used in powder coatings. | |
| GH-3325 | ZheJiang GuangHua New Materials Co., Ltd. | GH-3325 is a saturated carboxylated polyester resin that is designed for 95/5 Primid powders to be cured at 180°C. This product has good weathering resistance and gas-oven resistance, and it is commonly used in powder coatings. | |
| GH-4401 | ZheJiang GuangHua New Materials Co., Ltd. | GH-4401 is a saturated carboxylated polyester resin that is designed for 90/10 TGIC powders to be cured at 200°C. This product has very good durable ability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-4402 | ZheJiang GuangHua New Materials Co., Ltd. | GH-4402 is a saturated carboxylated polyester resin that is designed for 96/4 TGIC powders to be cured at 200°C. This product has very good durable ability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-4403 | ZheJiang GuangHua New Materials Co., Ltd. | GH-4403 is a saturated carboxylated polyester resin that is designed for 90/10 TGIC powders to be cured at 200°C. This product has outstanding storage stability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-4404 | ZheJiang GuangHua New Materials Co., Ltd. | GH-4404 is a saturated carboxylated polyester resin that is designed for 95/5 TGIC powders to be cured at 200°C. This product has outstanding storage stability and good over-baking resistance, and it is commonly used in powder coatings. | |
| GH-4405 | ZheJiang GuangHua New Materials Co., Ltd. | GH-4405 is a saturated carboxylated polyester resin that is designed for 96/4 TGIC powders to be cured at 200°C. This product has outstanding storage stability and high chemical resistance, and it is commonly used in powder coatings. | |
| GH-5501 | ZheJiang GuangHua New Materials Co., Ltd. | GH-5501 is a saturated carboxylated polyester resin that is designed for 93/7 TGIC powders to be cured at 200°C. This product has super durable ability and good chemical resistance, and it is commonly used in powder coatings. | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| Omacide® IPBC 100 Fungicide | Arxada | 广谱杀真菌剂，可配制于室内和室外用油漆、涂料和木器着色剂中，以提供干膜保护 | |
| Omacide™ IPBC 20 TX Fungicide | Arxada | 广谱液体杀真菌剂，可为室内室外用油漆、涂料和木器着色剂提供干膜保护。也可为胶粘剂、填缝剂和密封剂提供出色的真菌控制 | |
| Omacide® IPBC 30 Fungicide | Arxada | Omacide® IPBC 30杀菌剂是一种广谱性液体杀菌剂，基于广泛使用的杀真菌活性成分，3-碘-2-丙炔基-丁基氨基甲酸酯（IPBC）。溶剂包是酯醇和乙二醇醚的混合物。当配置于外墙油漆和涂料、木器涂料、胶粘剂、填缝、密封剂、纸张涂料、纺织品和塑料配方中，Omacide® IPBC 30杀菌剂可赋予干膜保护，防止真菌生长。应用于油墨和金属加工液系统中，它也提供了出色的真菌控制。 |
