| 4A Molecular Sieve | BELIKE Chemical Co.,Ltd. | 4A Molecular Sieve is a dark grey powder. This product is most commonly used as a desiccant in lacquer and paint applications. | |
| Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
| Benzidine Yellow 10G | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Disazo, a molecular weight of 754.49, a density of 1.6, and a heat resistance of 180°C. Its main application is in industrial paint, although it can als...展开 Benzidine Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Disazo, a molecular weight of 754.49, a density of 1.6, and a heat resistance of 180°C. Its main application is in industrial paint, although it can also be used in plastic. 收起 | |
| Benzidine Yellow DHG | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be use...展开 Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing. 收起 | |
| Benzidine Yellow G | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ...展开 Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow G-A | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be us...展开 Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing, plastic, and water-based ink. 收起 | |
| Benzidine Yellow G-B | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offs...展开 Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow H121 | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also ...展开 Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also be used in toluene base ink and PP ink. 收起 | |
| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| Bronze Red C | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in p...展开 Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in plastic and water-based ink. 收起 | |
| Bronze Red C-P | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in of...展开 Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in offset ink. 收起 | |
| Bronze Red C-S | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP,...展开 Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP, PA, and offset ink. 收起 | |
| Bronze Red C-W | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be us...展开 Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂，可用于需要高溶解性的应用场合 | |
| Coated Deep Chrome Yellow QS3000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Deep Chrome Yellow QS3000 is an inorganic pigment used in paints. It has oil absorption of 30 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Light Chrome Yellow QS1500 | Brill International Trade (Tianjin) Co., Ltd. | Coated Light Chrome Yellow QS1500 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated medium Chrome Yellow QS2900 | Brill International Trade (Tianjin) Co., Ltd. | Coated medium Chrome Yellow QS2900 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated medium Chrome Yellow QS2901 | Brill International Trade (Tianjin) Co., Ltd. | Coated medium Chrome Yellow QS2901 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Medium Chrome Yellow QS2920 | Brill International Trade (Tianjin) Co., Ltd. | Coated Medium Chrome Yellow QS2920 is an inorganic pigment used in paints. It has oil absorption of 26 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Molybdate Orange QS7000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Molybdate Orange QS7000 is an inorganic pigment used in paint. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Molybdate Orange QS8000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Molybdate Orange QS8000 is an inorganic pigment used in paint. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated orange Chrome Yellow QS3500 | Brill International Trade (Tianjin) Co., Ltd. | Coated orange Chrome Yellow QS3500 is an inorganic pigment used in paints. It has oil absorption of 25 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| Deep Chrome Yellow 124 | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124 is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| Deep Chrome Yellow 124GQ | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124GQ is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| Fast Blue B | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue B is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used ...展开 Fast Blue B is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, plastic, water-based ink, and industrial paint. 收起 | |
| Fast Blue BGNCF | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BGNCF is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be u...展开 Fast Blue BGNCF is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue BGS | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BGS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be use...展开 Fast Blue BGS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue BS | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576 to 610, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be ...展开 Fast Blue BS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576 to 610, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue Lake BO | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue Lake BO is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 140°C. Its main applications are in offset ink and water-based ink. | |
| Fast Blue Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue Toner is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.5, and a heat resistance of 140°C. Its main applications are in offset ink and water-based ink. | |
| Fast Green G | Brill International Trade (Tianjin) Co., Ltd. | Fast Green G is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 1029 to 1127, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also b...展开 Fast Green G is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 1029 to 1127, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Orange G | Brill International Trade (Tianjin) Co., Ltd. | Fast Orange G is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 623.48, a density of 1.6, and a heat resistance of 160°C. Its main applications are in textile printing and water-based ink, altho...展开 Fast Orange G is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 623.48, a density of 1.6, and a heat resistance of 160°C. Its main applications are in textile printing and water-based ink, although it can also be used in plastic, NC ink, and offset ink. 收起 | |
| Fast Orange RL | Brill International Trade (Tianjin) Co., Ltd. | Fast Orange RL is an organic pigment with a reddish yellow shade. It has the chemical family of Azo, a molecular weight of 651.60, a density of 1.6, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used i...展开 Fast Orange RL is an organic pigment with a reddish yellow shade. It has the chemical family of Azo, a molecular weight of 651.60, a density of 1.6, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in plastic and textile printing. 收起 | |
| Fast Pink Lake | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Lake is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.6, and a heat resistance of 100°C or 120°C. Its main applications are in NC ink and offset ink, although it can also be used in PA ink. | |
| Fast Pink Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in offset ink. | |
| Fast Pink Toner NC | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner NC is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in NC ink, although it can also be used in PP and PA ink. | |
| Fast Pink Toner W | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner W is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in water-based ink. |
