| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Epotec® TW 5001 | Aditya Birla | Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. T...展开 Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, and adhesives. 收起 | |
| Epotec® TW 5002 | Aditya Birla | Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...展开 Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. 收起 | |
| Epotec® TW 5003H | Aditya Birla | Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...展开 Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. 收起 | |
| Epotec® TW 5004 | Aditya Birla | Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders...展开 Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders, coatings, and adhesives. 收起 | |
| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...展开 Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. 收起 | |
| Epotec® YD 012 X 75 | Aditya Birla | Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. | |
| Epotec® YD 126 | Aditya Birla | Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...展开 Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 127 | Aditya Birla | Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...展开 Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 127LC | Aditya Birla | Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical,...展开 Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, and construction applications. 收起 | |
| Epotec® YD 128 | Aditya Birla | Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...展开 Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 128 EL | Aditya Birla | Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for ...展开 Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 J | Aditya Birla | Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free co...展开 Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 R | Aditya Birla | Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...展开 Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 S | Aditya Birla | Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...展开 Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings and adhesives. 收起 | |
| Epotec® YD 129 | Aditya Birla | Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring appli...展开 Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 134 A | Aditya Birla | Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...展开 Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. 收起 | |
| Epotec® YD 134 S | Aditya Birla | Epotec® YD 134 S is a high molecular weight, bisphenol-A-based semi-solid epoxy resin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, and coal tar-based coatings. | |
| Epotec® YD 134 X 80 | Aditya Birla | Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...展开 Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 134 X 90 | Aditya Birla | Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...展开 Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 136 | Aditya Birla | Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesive...展开 Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesives, and solvent-based coatings. 收起 | |
| Epotec® YD 515 | Aditya Birla | Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhe...展开 Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhesives. 收起 | |
| Epotec® YD 519 | Aditya Birla | Epotec® YD 519 is a general purpose, medium viscosity, reactive diluent-modified diglycidyl ether of bisphenol-A. This product is ideal for use in adhesives, coatings, and laminates. | |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...展开 Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. 收起 | |
| Epotec® YD 529 | Aditya Birla | Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding ...展开 Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding applications. 收起 | |
| Epotec® YD 535 | Aditya Birla | Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesi...展开 Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesives for fiber-reinforced structural components - such as those used in automotive, sporting equipment, navy, aeronautic, marine, and electrical insulation applications. 收起 | |
| Epotec® YD 801 X 75 | Aditya Birla | Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corro...展开 Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corrosive coatings, adhesives, and laminates. 收起 | |
| Epotec® YD 901EK-80 | Aditya Birla | Epotec® YD 901EK-80 is an unmodified, standard, medium molecular weight and low softening point epoxy resin in MEK. This product is ideal for use in marine coatings, industrial anti-corrosive & maintenance coatings, and adhesives. | |
| Epotec® YDF 170LV | Aditya Birla | Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coati...展开 Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coatings, industrial flooring applications, and laminates. 收起 | |
| Epotec® YDF 171 | Aditya Birla | Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, aut...展开 Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 250 | Aditya Birla | Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins...展开 Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 251 | Aditya Birla | Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is i...展开 Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 253 | Aditya Birla | Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface t...展开 Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 261LV | Aditya Birla | Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhe...展开 Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 262 | Aditya Birla | Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 269 | Aditya Birla | Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YDFM 270 | Aditya Birla | Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & ...展开 Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self-leveling flooring applications, and marine & industrial protective coatings. 收起 | |
| Epotec® YDH 184 | Aditya Birla | Epotec® YDH 184 is a diglycidyl ester of hexahydrophthalic anhydride resin, featuring good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor application on metal,...展开 Epotec® YDH 184 is a diglycidyl ester of hexahydrophthalic anhydride resin, featuring good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor application on metal, wood, & concrete surfaces. 收起 | |
| Epotec® YDH 3000 | Aditya Birla | Epotec® YDH 3000 is a diglycidyl ether of hydrogenated bisphenol-A. This low viscosity epoxy resin features good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor...展开 Epotec® YDH 3000 is a diglycidyl ether of hydrogenated bisphenol-A. This low viscosity epoxy resin features good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor application on metal, wood, and concrete surfaces. 收起 | |
| Epotec® YDPN 631 | Aditya Birla | Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings. | |
| Epotec® YDPN 638 | Aditya Birla | Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...展开 Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. 收起 | |
| Epotec® YDPN 638LV | Aditya Birla | Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...展开 Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. 收起 | |
| Epotec® YDPN 661 | Aditya Birla | Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings. | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...展开 KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...展开 KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...展开 KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 BO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...展开 KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...展开 KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1157 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness,...展开 KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1160 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, a...展开 KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1160 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low ...展开 KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BO Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 |
