| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| Epoben CO 74 | Benasedo | Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a vis...展开 Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a viscosity [G.H.] of X-Z, an A.V. solids amount of 0.5-1.5, and a colour [G.H.] maximum of 5. It has nitro applications. 收起 | |
| Epoben R 403 in Solvesso 100 | Benasedo | Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers...展开 Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. 收起 | |
| Epoben R 403 in Xylene | Benasedo | Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% soli...展开 Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% solids content, a viscosity [ G.H.] of T-V, an A.V. solids amount of 0.5-1.5, a color [G.H.] maximum of 6. It has bake and air applications. 收起 | |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | |
| Epofen 254 | Benasedo | Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300...展开 Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300 and allows the formulators to produce pasteurization resistant varnishes. 收起 | |
| EPOFEN W 1205 | Benasedo | EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food c...展开 EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food contact paints only when the applied film is completely cross-linked and free of solvents, so that the content of extractable monomers becomes lower than the maximum allowed. 收起 | |
| EPOSOL 7 | Benasedo | EPOSOL 7 is suitable for can coating and drum paints when properly combined with Phenolic and/or melamine binders. | |
| EPOSOL 9 | Benasedo | EPOSOL 9 is endowed with very good flexibility hardness and chemical resistance properties. It should be in combination with Phenolic, Melamine or Polyamide binders. | |
| EPOSOL AP 100 | Benasedo | EPOSOL AP 100 is a special additive improving the adhesion and the elasticity in baking enamel for metal substrates. It is stable in colour and doesn’t have any influence on weather resistance properties of the paints. | |
| GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
| GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
| GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
| GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
| GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
| GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
| GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| Hartben 405 | Benasedo | Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...展开 Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. 收起 | |
| Hartben 75 PS-T | Benasedo | Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75...展开 Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75 P/ST allows to produce sealers and finishes for furniture, floors and metals, when a good yellowing resistance is not particularly requested. 收起 | |
| Hartben A 75 | Benasedo | Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This pro...展开 Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This product has a viscosity of D-I, a free monomer of < 0.5%, and NCO of 14.5-16.5, and a colour [G.H.] maximum of 1. 收起 | |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...展开 Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. 收起 | |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...展开 Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. 收起 | |
| Hartben MC 53 | Benasedo | Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....展开 Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. 收起 | |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...展开 Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HDK® H13L | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H15 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H20 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® H2000 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® N20 | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® N20D | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® T30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。 | |
| HDK® T40 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产粉末物质时用作松散助剂。 | |
| Idroben 130 | Benasedo | Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...展开 Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. 收起 | |
| Idroben 178 | Benasedo | Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 3...展开 Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. 收起 | |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...展开 Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. 收起 | |
| Idroben 201 | Benasedo | Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains ...展开 Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH level of 7.0=8.0. This product has bake and air applications. 收起 | |
| Idroben 202 | Benasedo | Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% sol...展开 Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH level of 7.0-8.0. 收起 | |
| IDROBEN 2026 | Benasedo | IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle f...展开 IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle for primers and top-coats, when high mechanical properties are required, like the in can-coating field. 收起 | |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...展开 Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. 收起 | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...展开 IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. 收起 | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...展开 Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. 收起 | |
| Idroben 4913 | Benasedo | Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This produ...展开 Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH level of 8,0-8.5, a viscosity [Brookf.] m Pa.s of < 250, and an MFT of 0℃. 收起 | |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...展开 Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. 收起 | |
| Idroben 828 | Benasedo | Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...展开 Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. 收起 | |
| Idroben 878 | Benasedo | Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (6...展开 Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (60%) BG, a colour [G.H.] maximum, and an A.V. solids amount of 45-55. This product has bake applications. 收起 | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...展开 Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. 收起 | |
| IDROBEN PD 7051 | Benasedo | IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulat...展开 IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulations. 收起 | |
| IDROBEN PD 717 | Benasedo | IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plas...展开 IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plastics (ABS.Polystyrene etc.), glass and metals, endowed with very good hardness, good resistance to organic solvents like gasoline and ethanol. 收起 | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...展开 IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. 收起 | |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...展开 IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. 收起 | |
| IDROBEN UV 737G | Benasedo | IDROBEN UV 737G shows good reactivity, balanced hardness and flexibility, matched with very good chemical and scratch resistance properties. The resin is characterized by very high gloss and body. It can be used in dual curing systems. | |
| Idroben UV 747 | Benasedo | Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on w...展开 Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on wood and MDF substartes and, in particolar cases, could be also used for metal. 收起 | |
| Idroben UV 76 | Benasedo | Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be ...展开 Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be cured under UV lamps. It also shows a very good yellowing resistance, so that it’s really suitable for white pigmented paints. Idroben UV 76 shows very good chemical resistances and could be also used for clear matte paints. 收起 | |
| ISOBEN 10 | Benasedo | ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss ...展开 ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss and build up. 收起 | |
| ISOBEN 11 | Benasedo | ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce...展开 ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce wood coatings for frames or parquets. 收起 | |
| ISOBEN 15 | Benasedo | ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended f...展开 ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended for car refinishing, industrial and wood paints also for marine outdoor applications, combined with aliphatic isocyanates. 收起 | |
| ISOBEN 168 | Benasedo | ISOBEN 168 is a high–solids non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. It is suggested for polyurethane lacquers for marine automotive industry, enamels for wood and metals with outdoor resistance. | |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...展开 ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . 收起 | |
| ISOBEN 6 | Benasedo | ISOBEN 6 is a non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. In combination with aliphatic polyisocianates, provides films having very good gloss and colour retention. | |
| ISOBEN 87 | Benasedo | ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain ...展开 ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain high–quality enamels for metals, suitable both for interior and exterior applications. 收起 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 |
