| A-C 316A | DKSH | A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including ...展开 A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 325 | DKSH | A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...展开 A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6 | DKSH | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as...展开 A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617 | DKSH | A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used ...展开 A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617A | DKSH | A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also u...展开 A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629 | DKSH | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous appli...展开 A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629A | DKSH | A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can al...展开 A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6A | DKSH | A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also use...展开 A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...展开 AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ACQUAMINE PD 1419_7 | DKSH | ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. | Request Sample |
| ACQUAMINE PD 2157_2 | DKSH | ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life. | Request Sample |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ALU D10011 | DKSH | ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, ...展开 ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10017 | DKSH | ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, cre...展开 ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10028 | DKSH | ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes...展开 ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D2034 | DKSH | ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effe...展开 ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU F4016 | DKSH | ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection...展开 ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| AMPARMOR 1043 | DKSH | AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...展开 AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...展开 The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...展开 The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 4010 | DKSH | The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...展开 The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AOX52 | DKSH | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to ...展开 AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA. 收起 | Request Sample |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂，可用于需要高溶解性的应用场合 | |
| CD 1525 WH-4 | DKSH | CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line ...展开 CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems.Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CD 3008 WH-4 | DKSH | CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed...展开 CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems. Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DMBA | DKSH | DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available ...展开 DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available in Asia Pacific and Europe. 收起 | Request Sample |
| Ferrous Sulphate Heptahydrate | Ningbo Xinfu Titanium Dioxide Co., Ltd. | Ferrous Sulphate Heptahydrate appears as green crystal grains. This product has a TiO2 content of 0.5% and is often used in iron red, iron yellow, and blue inks. | |
| FLUBE CA 140 | DKSH | FLUBE CA 140 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA 140 F | DKSH | FLUBE CA 140 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA 40 F | DKSH | FLUBE CA 40 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA-40 | DKSH | FLUBE CA-40 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CR 100 F | DKSH | FLUBE CR 100 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE OS 139 F | DKSH | FLUBE OS 139 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE OS-39 | DKSH | FLUBE OS-39 is a sodium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| GAP 1E | DKSH | GAP 1E is a leafing aluminum pigment in paste. It has irregular flakes of medium particle size. It is a solvent: Mineral spirit. GAP Line are versatile aluminum pastes and powders available in different particle sizes for leafing and non-leafing, ideal fo...展开 GAP 1E is a leafing aluminum pigment in paste. It has irregular flakes of medium particle size. It is a solvent: Mineral spirit. GAP Line are versatile aluminum pastes and powders available in different particle sizes for leafing and non-leafing, ideal for industrial applications. Its main applicaitons are aluminium leafing and non-leafing for low end (hammer effect and protective) solvent-born. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展开 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展开 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展开 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展开 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展开 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展开 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展开 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展开 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展开 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展开 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展开 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 300 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
| GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
| GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
| GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
| GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
| GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
| GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
| Gi-PW-F031 | DKSH | Gi-PW-F031 is few layers graphene powder. It presents an economic solution to increase the mechanical strengths with less dosage than current additive on polymer, resin and rubber composites applications. | Request Sample |
| GMA | DKSH | Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy funct...展开 Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| GMA 97 | DKSH | Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy fu...展开 Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| Graphene Nanoplatelets | DKSH | Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and...展开 Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and North America. 收起 | Request Sample |
| GrintoSOL™ 1924 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and min...展开 GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2427 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and min...展开 GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2428 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and min...展开 GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2535 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and min...展开 GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2629 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and min...展开 GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and mineral oil distillates for offset inks. 收起 |
