| AEPD™ VOX 1000 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。 | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起 | |
| ALKATERGE®-T Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起 | |
| AMP™-75 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起 | |
| AMP™-90 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。 | |
| AMP™-95 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂，可用于需要高溶解性的应用场合 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| DMAMP-80™ Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。 | |
| FLEXITANE™ CA 6000 Specialty Coating Additive | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案 | |
| GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
| GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
| GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
| GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
| GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
| GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
| GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HDK® H13L | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H15 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H20 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® H2000 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® N20 | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® N20D | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® T30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。 | |
| HDK® T40 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产粉末物质时用作松散助剂。 | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-172 | BlueSky Chemical Co., Ltd. | LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....展开 LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. 收起 | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 | |
| POL-2322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起 | |
| POL-2325 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起 | |
| POL-2328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起 | |
| POL-2338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-2345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 2500 and a Hydroxyl Value of 42-48 mgKOH/g. 收起 | |
| POL-2356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000 which can be adjusted as needed. 收起 | |
| POL-2365 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 63-67 mgKOH/g and a Molecular Weight of 1700 which can be adjusted as needed. 收起 | |
| POL-2375 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a a Molecular Weight of 1500 and a Viscosity of 1000cps @ 60°C. 收起 | |
| POL-238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase...展开 POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 3000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-2428 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 26-30 mgKOH/g and a Molecular Weight of 4000. 收起 | |
| POL-2456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 2000 and a Viscosity of 1500 cps @ 60°C. 收起 | |
| POL-2466 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1700 and a Viscosity of 2000 cps @ 60°C. 收起 | |
| POL-2476 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1500 and a Hydroxyl Value of 71-79 mgKOH/g. 收起 | |
| POL-2500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-256 | Qingdao Xinyutian Chemical Co., Ltd. | POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase...展开 POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 2000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-25722 | Qingdao Xinyutian Chemical Co., Ltd. | POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. ...展开 POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 5000 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-265 | Qingdao Xinyutian Chemical Co., Ltd. | POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer...展开 POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and an Acidic Value the is <1.5 mgKOH/g. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 10000 and a Hydroxyl Value of 10-12 mgKOH/g. 收起 | |
| POL-3112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing f...展开 POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 1000 and a Viscosity of 380 cps @ 60°C. 收起 | |
| POL-3195 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increa...展开 POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 600 and a Viscosity of 250 cps @ 60°C. 收起 | |
| POL-322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 5000 and a Hydroxyl Value of 20-24 mgKOH/g. 收起 | |
| POL-328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Molecular Weight of 4000 and a Hydroxyl Value of 26-30 mgKOH/g. 收起 | |
| POL-338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 35-41 mgKOH/g and a Viscosity of 2400 cps @ 60°C. 收起 | |
| POL-345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 42-48 mgKOH/g and a Molecular Weight of 2500. 收起 | |
| POL-3538 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing fo...展开 POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 2000 and a Viscosity of 1300 cps @ 60°C. 收起 | |
| POL-456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resist...展开 POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 2000 and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and a Water Value that is <0.03%. 收起 |
