| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...展开 ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...展开 ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. 收起 | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...展开 ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. 收起 | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...展开 ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. 收起 | Request Sample |
| ITAMID FL520 | DKSH | ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteris...展开 ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity and slight flexibility with high levels of mortar stability. 收起 | Request Sample |
| ITAMID FL520/S | DKSH | ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...展开 ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. 收起 | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| ITAMID FL550/S | DKSH | ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...展开 ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. 收起 | Request Sample |
| ITAMID M20P | DKSH | The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...展开 The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M20P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M20P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M20P is generally incompatible with polyesters, vinyl resins and urea. 收起 | Request Sample |
| ITAMID M21P | DKSH | The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...展开 The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M21P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M21P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M21P is generally incompatible with polyesters, vinyl resins and urea. 收起 | Request Sample |
| ITAMID M30P | DKSH | ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bondin...展开 ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bonding of PVC. 收起 | Request Sample |
| ITAMINE CA165 | DKSH | ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure te...展开 ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure temperatures. ITAMINE CA 165 has good resistance to water spotting and also features good blush resistance. 收起 | Request Sample |
| ITAMINE CA30 | DKSH | ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for applica...展开 ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems): ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起 | Request Sample |
| ITAMINE CA30LA | DKSH | ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for app...展开 ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems). 收起 | Request Sample |
| ITAMINE CA51L | DKSH | ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY,...展开 ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. 收起 | Request Sample |
| ITAMINE CA60 | DKSH | ITAMINE CA60 is an Epoxy Resins curing agent based on cycloaliphatic amine adduct, it is particularly indicated for room temperature, solvent free systems, glazes and food covering with low fatty content for example wine and fresh water tank. | Request Sample |
| ITAMINE CA70 | DKSH | ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENIN...展开 ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. ITAMINE CA70 is also indicated for food covering with low fatty content for example wine and fresh water tank. 收起 | Request Sample |
| ITAMINE CA80 | DKSH | ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for applica...展开 ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems) The main properties of this hardener are the following: COMPLETE CURING EVEN AT LOW TEMPERATURE (0°C), ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起 | Request Sample |
| ITAMINE FL43 | DKSH | ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...展开 ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). 收起 | Request Sample |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| Lemon Chrome Yellow | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Lemon Chrome Yellow is a bright yellow pigment. This product is most commonly used in offset ink and industrial paint applications. It has a heat resistance of 180°C and a pH value of 6.5-7.5. | |
| Light Chrome Yellow | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Light Chrome Yellow is a bright yellow pigment. This product is most commonly used in offset ink and industrial paint applications. It has a heat resistance of 180°C and a pH value of 6.5-7.5. | |
| Lithol Bordeaux 2R | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Lithol Bordeaux 2R is a bluish red pigment. This product is most commonly used in industrial paint applications. It has a heat resistance of 160°C and a pH value of 7-8. | |
| Lithol Carmine H300 | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Lithol Carmine H300 is a bluish red pigment. This product is most commonly used for industrial paint, PP, PA, and toluene base ink applications. It has a heat resistance of 180°C and a pH value of 7-8. | |
| Lithol Dark Red W | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Lithol Dark Red W is a bluish red pigment. This product is most commonly used in water based ink and industrial paint applications. It has a heat resistance of 160°C and a pH value of 6.5-7.5. | |
| Lithol Red R | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Lithol Red R is a red pigment. This product is most commonly used in industrial paint, offset ink, and water based ink applications. It has a heat resistance of 160°C and a pH value of 7-8. | |
| Luna ACMO | DKSH | Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. ...展开 Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. Luna ACMO is used as a reactive diluent monomer for UV, EB curable resins in radicalic systems. Luna ACMO has good compatibility with oligomers, multi-functional acrylates, and resin components having a quicker hardening speed in the polymerization process than Isobornyl Acrylate and Phenoxyethyl Acrylate. Luna ACMO provides UV, EB curable resins made with a low hygroscopicity and good resistance to alkali, acids, and solvents. Moreover it has a nitrogen radical, which prevents generation of ozone inhibiting polymerization. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna ADH | DKSH | Luna ADH is mainly used as Chain Extender in waterbourne polyurethane systems. Commonly it is used in combination with Luna DAAM. Can also be used as a chain Extender for waterbourne PU Systems. This product is available in Europe, Asia and North America. | Request Sample |
| Luna DAAM | DKSH | Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and ...展开 Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and UV stability. Luna DAAM can be used in the following areas: paper treatment, adhesives, water borne coatings (cross linkable at room temperature), photosensitive resins, crosslinking agents, textile treatment, hairsprays and resin modifier. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna DCD 10 | DKSH | Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and N...展开 Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna EEP | DKSH | Luna EEP is a slow evaporation ether-ester urethane grade solvent with excellent activity for a wide range of coating formulations. Its linear structure and the propionyl group in the center of the molecule give this material an outstanding solvent perfor...展开 Luna EEP is a slow evaporation ether-ester urethane grade solvent with excellent activity for a wide range of coating formulations. Its linear structure and the propionyl group in the center of the molecule give this material an outstanding solvent performance as high solvent activity, slow evaporation rates, exceptional flow and leveling, as well as a high electrical resistance. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna ESBO A | DKSH | Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility...展开 Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility and to bring high functionality. Moderate cure speed, with low odor and skin irritancy. Good compatibility with non polar substrates. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna PTSI P | DKSH | Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...展开 Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna SI ICPTES | DKSH | Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce si...展开 Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-add K C404 | DKSH | Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...展开 Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. 收起 | Request Sample |
| Luna-add K C405-SD | DKSH | Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cur...展开 Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cured with TGIC or with glycidylesters. 收起 | Request Sample |
| Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...展开 Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...展开 Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-charge 2485 | DKSH | Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 3...展开 Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 308. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-clear 202 OP | DKSH | Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of g...展开 Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of glycidylmethacrylate groups. It prevents yellowing in directly heated ovens and yellowing, which occures on parellel coating lines with different chemistries. Luna-clear 202 OP is halogen-free and contains no heavy metals. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 550 | DKSH | Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be ...展开 Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be produced by using Luna-cryl 550 in conjunction with polyesters having acid values between 30-35 mg KOH/g. Standard polyester resins used for TGIC, HAA, GMA or Araldite PT-910 powder coatings are well suited for use with Lunacryl 550. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 700 | DKSH | Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 710 | DKSH | Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). Luna-cryl 710 offers improved flexibility as compared to its predecessor, Luna-cryl 700. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure MACM | DKSH | Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings...展开 Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings (marine, anti-corrosion) and composites, and encapsulating resins for electronics. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure PACM | DKSH | Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...展开 Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure RFE | DKSH | Lunacure RFE is a highly efficient crosslinker. It can be used for adhesives based on polyurethane, synthetic or natural rubber. It also improves adhesion to rubber-based substrates. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-flow C-85 | DKSH | Luna-flow C-85 is a castor oil derivative, which is used to significantly reduce the melt viscosity and increase the open time of powder coatings during the molten stage of the curing process. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
| Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
| Luna-fos 126J | DKSH | Luna-fos 126J is a high performance organo-phosphie processing stabilizer which protects coatings from thermo-oxidative degradation by decomposing hydroperoxides to form non-radical, non-reactive products. This product is available in Europe, Asia and Nor...展开 Luna-fos 126J is a high performance organo-phosphie processing stabilizer which protects coatings from thermo-oxidative degradation by decomposing hydroperoxides to form non-radical, non-reactive products. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-fos 168 | DKSH | Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe,...展开 Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-glyme DMM | DKSH | Luna-glyme DMM is an aprotic solvent which is relatively inert and can be used in protonsensitive systems such as water-based polyurethane coatings. Chemical name: Dipropylene Glycol Dimethylether, Dimethoxy dipropyleneglycol, CH3OCH2CH(CH3)OCH2CH(CH3)OCH...展开 Luna-glyme DMM is an aprotic solvent which is relatively inert and can be used in protonsensitive systems such as water-based polyurethane coatings. Chemical name: Dipropylene Glycol Dimethylether, Dimethoxy dipropyleneglycol, CH3OCH2CH(CH3)OCH2CH(CH3)OCH3. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-matt 70 | DKSH | Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, c...展开 Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, color stability and gloss stability at over baking condition, special application in light color powder coating. It can also provide good surface properties such as excellent flow, smooth surface and excellent finger print resistance. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-matt 71 | DKSH | Luna-matt 71 is a reactive matting agent based on carboxyl-function acrylic resin for polyester/epoxy hybrid powder coatings to provide 3–40% (60°) of gloss. It features outstanding mechanical properties and storage stability. This product is available in...展开 Luna-matt 71 is a reactive matting agent based on carboxyl-function acrylic resin for polyester/epoxy hybrid powder coatings to provide 3–40% (60°) of gloss. It features outstanding mechanical properties and storage stability. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer 1174 | DKSH | Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is avai...展开 Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer 2165 | DKSH | Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing proper...展开 Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing properties and very good finger-print resistance. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer 2165D | DKSH | Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can p...展开 Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can provide ranges from 8–60% (60°) of low gloss, excellent flow and outstanding anti-yellowing. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer 3329-1 | DKSH | Luna-mer 3329-1 is a modified wax used as a gloss control agent to produce powder finishes having a 60° gloss range of 30–70%. This product is most suitable for epoxy/polyester and polyester- TGIC systems. This product is available in Europe, Asia and Nor...展开 Luna-mer 3329-1 is a modified wax used as a gloss control agent to produce powder finishes having a 60° gloss range of 30–70%. This product is most suitable for epoxy/polyester and polyester- TGIC systems. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer 552 | DKSH | Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile ...展开 Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile resulting in powder coatings that are safe to work with. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-mer B-31 | DKSH | Luna-mer B-31 is a hardener for highly reactive epoxy powder coatings, pure epoxy and accelerator for DICY or epoxy-polyester powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-mer B-55 | DKSH | Luna-mer B-55 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-mer B-68 | DKSH | Luna-mer B-68 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-mer DDA | DKSH | Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction...展开 Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction. Luna-mer DDA offers cured coatings with outstanding clarity, non-yellowing properties, chemical resistance and exterior durability. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-nox AO-76 | DKSH | Luna-nox AO-76 is a sterically hindered amine phenolic antioxidant to be used as a highly efficient stabilizer for organic substrates such as plastics, coatings, adhesives and waxes. It protects substrates against thermo-oxidative degradation. This produc...展开 Luna-nox AO-76 is a sterically hindered amine phenolic antioxidant to be used as a highly efficient stabilizer for organic substrates such as plastics, coatings, adhesives and waxes. It protects substrates against thermo-oxidative degradation. This product is odorless and has excellent light stability. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-nox B900J | DKSH | Luna-nox B900J is a synergistic processing and long-term thermal stabilizer system. This product is available in Europe, Asia and North America. | Request Sample |
| Luna®-pal A81 | DKSH | Luna®-pal A81 is a polyaldehyde resin produced by condensation of urea aliphatic aldehydes. It is ideal for use in Pigment pastes and Industrial coatings. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A81 K | DKSH | Luna-pal A81 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A81 K has a softening range of 80-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A91 K | DKSH | Luna-pal A91 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A91 K has a softening range of 90-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal KY-A81-C (Benzene Free) | DKSH | Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and...展开 Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and has very good wetting and dispersion properties. It is a multifunctional additive used also to improve the adhesion, gloss, hardness, and solid content. It can also be used in universal pigment pastes. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-sperse 516 | DKSH | Luna-sperse 516 is a 100% active polymeric material which offers improved pigment dispersion and stability in powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-stab 5501 | DKSH | Luna-stab 5501 is a micronized stabilizer for metallic pigments, especially aluminum powder, capable of preventing effectively degradation arising from oxygen or moisture to inhibiting surface defects such as blackening, darkening, spots formation and los...展开 Luna-stab 5501 is a micronized stabilizer for metallic pigments, especially aluminum powder, capable of preventing effectively degradation arising from oxygen or moisture to inhibiting surface defects such as blackening, darkening, spots formation and loss of brilliance in appearance of metallic effect powder coatings. Luna-stab 5501 is recommended as a stabilizer, combined with some metallic pigments, especially, aluminum powder including leaf or non-leaf, to use in metallic effect powder coatings based on: Polyester/TGIC/HAA, hybrid, PU and epoxy. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-stab LS144 | DKSH | Luna-stab LS144 is a hindered amine light stabilizer (HALS) and also contains a sterically hindered phenol antioxidant. It significantly extends coating life time by minimizing paint defects such as cracking and loss of gloss. This product is available in...展开 Luna-stab LS144 is a hindered amine light stabilizer (HALS) and also contains a sterically hindered phenol antioxidant. It significantly extends coating life time by minimizing paint defects such as cracking and loss of gloss. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-tex 207 | DKSH | Luna-tex 207 is an amide modified vinylidene fluoride polymer which can be used as a special textured additive in powder coatings for a variety of end use applications (i.e., electrical equipment housing, office furniture, playground furniture, or for man...展开 Luna-tex 207 is an amide modified vinylidene fluoride polymer which can be used as a special textured additive in powder coatings for a variety of end use applications (i.e., electrical equipment housing, office furniture, playground furniture, or for many industrial applications that require a textured finish). This product is available in Europe, Asia and North America. 收起 | Request Sample |
