UL Prospector

成功!

成功保存搜索结果
Easaqua™ L 600 Vencorex Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起
Easaqua™ M 501 Vencorex Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起
Easaqua™ M 502 Vencorex Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起
Easaqua™ WAT-3 Vencorex Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起
Easaqua™ WAT-4 Vencorex Easaqua™ WAT-4是一种以脂质聚异氰酸酯(HDI均聚物)为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂,根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂,用于汽车、家居装饰用品,配套皮革用品以及3D层压应用等汽车和家具行业。
Easaqua™ X D 401 Vencorex Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Easaqua™ X D 803 Vencorex Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Easaqua™ X D 870 Vencorex Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起
Hexamethylene Diisocyanate (HDI) Vencorex Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...展开 Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. 收起
Isophorone Diisocyanate (IPDI) Vencorex Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...展开 Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. 收起
JMT-150ANO Tayca Corporation JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150AO Tayca Corporation JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150FI Tayca Corporation JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150IB Tayca Corporation JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JR-301 Tayca Corporation JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起
JR-403 Tayca Corporation JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-405 Tayca Corporation JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起
JR-600A Tayca Corporation JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-600E Tayca Corporation JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起
JR-603 Tayca Corporation JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起
JR-605 Tayca Corporation JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-701 Tayca Corporation JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起
JR-800 Tayca Corporation JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起
JR-805 Tayca Corporation JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起
JR-806 Tayca Corporation JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起
JRNC Tayca Corporation JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起
K-White #105 Tayca Corporation K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #140W Tayca Corporation K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #450H Tayca Corporation K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #82 Tayca Corporation K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #84 Tayca Corporation K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #84S Tayca Corporation K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #85 Tayca Corporation K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #94 Tayca Corporation K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White Ca650 Tayca Corporation K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White G105 Tayca Corporation K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
LIOCRYL AM 432 Synthopol Chemie Germany LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...展开 LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. 收起
LIOCRYL AM 483 Synthopol Chemie Germany LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or...展开 LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 900 Synthopol Chemie Germany LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. Afte...展开 LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. After drying, the film has a good hardness and blocking resistance despite the low MFFT. It has an extremely high light and water resistance as well as adhesion even when exposed to large amounts of water on substrates such as glass, metal, and wood. 收起
LIOCRYL AM 903 Synthopol Chemie Germany LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The ...展开 LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. LIOCRYL AM 903 contains no alkyl phenol ethoxylates (APEO's). 收起
LIOCRYL AM 907 Synthopol Chemie Germany LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is disti...展开 LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is distinguished by good blocking resistance, good flow and high gloss, and good yellowing resistance. Films of the emulsion are clear, tough and resilient, light resistant, and display good resistance to water, ethanol, and alkali. 收起
LIOCRYL AM 912 Synthopol Chemie Germany LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguish...展开 LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguished by excellent adhesion to old alkyd resin coats exposed to moisture. The glossy paints are characterized by good stability, levelling, resistance to light and blocking resistance. 收起
LIOCRYL AM 914 Synthopol Chemie Germany LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance...展开 LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 916 Synthopol Chemie Germany LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion...展开 LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AM 920 Synthopol Chemie Germany LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints...展开 LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. For the purpose of 2 C paints Liocryl AM 920 can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance, plasticiser resistance and non-yellowing properties are required. 收起
LIOCRYL AM 921 Synthopol Chemie Germany LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and ...展开 LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. Coatings based on Liocryl AM 921 show good grain enhancement on wood. Liocryl AM 921 is an APEO free version of Liocryl AM 920. 收起
LIOCRYL AM 923 Synthopol Chemie Germany LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and f...展开 LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. For this purpose it can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance and yellowing resistance are required. As a result of the fine particle size, excellent transparency in the wet film is obtained together with very good grain enhancement. 收起
LIOCRYL AM 951 Synthopol Chemie Germany LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resist...展开 LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resistance and good stability characteristics. 收起
LIOCRYL AM 955 Synthopol Chemie Germany LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very...展开 LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very good. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起
LIOCRYL AM 982 Synthopol Chemie Germany LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it con...展开 LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it contains no plasticisers and no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 320 N Synthopol Chemie Germany LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries ...展开 LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water and a high saponification resistance. Because of these properties Liocryl AS 320 is expecially suitable for the production of outdoor paints and plastics-bound plasters as well as for impregnating and priming brickwork and sanding plasters. 收起
LIOCRYL AS 603 Synthopol Chemie Germany LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and h...展开 LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and high gloss. The emulsion is preserved for storage. It contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 610 Synthopol Chemie Germany LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Co...展开 LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Combined with PU dispersion LIOPUR 92-091, varnishes can be formulated that meet the requirements for receiving the “blue angel” mark denoting environmentally safe products. The films of AS 610 are clear, hard and have good water resistance, and the necessary abrasion values for parquet floor varnishes (Taber abraser). 收起
LIOCRYL AS 615 Synthopol Chemie Germany LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserve...展开 LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserved for storage, and contains no formaldehyde or formaldehyde-releasing products. 收起
LIOCRYL AS 640 Synthopol Chemie Germany LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addi...展开 LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addition of coalescents for proper film formation The emulsion film can have a slightly structured surface. This phenomenon does not however appear in formulated coatings, therefore the properties of the coatings (such as gloss or transparency) are not adversely affected. 收起
LIOCRYL AS 680 Synthopol Chemie Germany LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based...展开 LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based on these combinations are distinguished by good chemical resistance against ethanol and plasticiser. Used as a sole binder, Liocryl AS 680 has good adhesion properties on plastics such as polystyrene. The resistance against ethanol and petrol is good. 收起
LIOPTAL 541 Synthopol Chemie Germany LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination wi...展开 LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. 收起
LIOPTAL 836 Synthopol Chemie Germany LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...展开 LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. 收起
LIOPTAL A 424 Synthopol Chemie Germany LIOPTAL A 424 is a heat-reactive acrylic resin that is cross-linkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with high reactivity, stoving temperatures starting at 100°C.
LIOPTAL A 453 60% Synthopol Chemie Germany LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving c...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving conditions 130°C and higher. 收起
LIOPTAL A 453 65% Synthopol Chemie Germany LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product a...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product are 130°C and higher. 收起
LIOPTAL A 470 Synthopol Chemie Germany LIOPTAL A 470 is an acrylic resin that is crosslinkable with melamine resins. It is recommended for stove-drying top coats in combination with melamine resins.
LIOPTAL A 471 Synthopol Chemie Germany LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathe...展开 LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathering resistance. It is suitable for stoving conditions above 130°C. This product is esed for metal substrates as a base coat and topcoat for high solid automotive and industrial coatings. 收起
LIOPTAL B 49 Synthopol Chemie Germany LIOPTAL B 49 is a fast-drying medium-oil alkyd resin. It can be used in machine and automotive coatings, radiator paints, industrial coatings and primers, effect coatings, and with melamine resins for 80°C.
LIOPTAL ES 43 Synthopol Chemie Germany LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...展开 LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. 收起
LIOPTAL TH 406 Synthopol Chemie Germany LIOPTAL TH 406 is a short-oil alkyd resin modified with phenol resin. It is suitable for use in fast-drying anti-corrosive primers and synthetic resin-based paints, shop primers, knife fillers, and stove-drying industrial primers and topcoats.
LIOPUR 2004-140 Synthopol Chemie Germany LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film formi...展开 LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film forming temperature, LIOPUR2004-140 does not need any coalescence agent for filmforming at room temperature. Therefore it can be combined with acrylic emulsions with high Tg like LIOCRYL AS 680 and AS 615. 收起
LIOPUR 2004-422 Synthopol Chemie Germany LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance a...展开 LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance and good resistance to ethanol. LIOPUR 2004-422 is recommended for waterbased 1C-wood lacquers with high hardness, good taber abraison and very good chemical resistance. 收起
LIOPUR 2005-380 Synthopol Chemie Germany LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C...展开 LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C wood lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Lacquers based on LIOPUR 2005-380 also exhibit a good recoatibility. 收起
LIOPUR PFL 1130 Synthopol Chemie Germany LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...展开 LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. 收起
LIOPUR PFL 1154 Synthopol Chemie Germany LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1...展开 LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1154 needs a small amount of appr 2-3 % butylglycol for film formation. Films based on LIOPUR PFL 1154 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 1154 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 1154 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起
LIOPUR PFL 1263 Synthopol Chemie Germany LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following...展开 LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following Zwick material testing characteristics after 4 days drying at room temperature (initial force 1 N, testing speed 100 mm/min): Tear strength approximately 1 N/mm^2, and elongation at break approximately 700%. 收起
LIOPUR PFL 1284 Synthopol Chemie Germany LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility a...展开 LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility and elasticity. These coatings exhibit a very good water resistance and good ethanol resistance. 收起
LIOPUR PFL 1908 Synthopol Chemie Germany LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good su...展开 LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. This product shows a good wet and dry appearance on wood. 收起
LIOPUR PFL 1964 Synthopol Chemie Germany LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic ...展开 LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic hydroxy-polyesters or polyurethane dispersions as 2-pack system for soft-feeling and decor paints. As combination partner the polyurethane dispersion Liopur PFL 1953 based on a polyester is recommended in order to find the right balance between price and performance. 收起
LIOPUR PFL 2146 Synthopol Chemie Germany LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air ...展开 LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. 收起
LIOPUR PFL 2315 Synthopol Chemie Germany LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit g...展开 LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 2315 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 2315 can be used in combination with water-emulsifiable polyisocyanates for air drying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 2315 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起
LIOPUR PFL 2323 Synthopol Chemie Germany LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 %...展开 LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 % butylglycol for film formation. Coatings based on LIOPUR PFL2323 form tack-free, transparent films with good surface hardness after air drying. These coatings exhibit a very good water resistance and for polyurethane dispersions excellent ethanol resistance. 收起
LIOPUR PFL 2366 Synthopol Chemie Germany LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are ta...展开 LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are tack-free and display good surface resistance of appr. 120 sec Pendulum hardness after König (90 μm wet film after 24 h drying at room temperature). LIOPUR PFL 2366 is suitable as a sole binder in the formulation of solventpoor air-drying 1-pack parquet flooring and furniture varnishes owing to sufficient chemical resistance 收起
LIOPUR PFL 2392 Synthopol Chemie Germany LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good hu...展开 LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good humidity resistance and good adhesion to different plastics due to the hydrophobic polymer character and its good intercoat adhesion to conventional 2C topcoats. 收起
LIOPUR PFL 2634 Synthopol Chemie Germany LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hard...展开 LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hardeners like water dilutable polyisocyanates. Films of these two-component coatings exhibit very high pendulum hardness and excellent light resistance. This product is also suitable for one component stoving enamels in combination with suitable water-dilutable crosslinkers like melamine resins or blocked polyisocyanates. 收起
LIOPUR PFL 2900 Synthopol Chemie Germany LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch ...展开 LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. It is suitable for 1C solventpoor wood and parquet lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Owing to its oily nature, paints can be made with LIOPUR PFL 2900 which have better high-build characteristics than conventional dispersions. 收起
LIOPUR PFL 2966 Synthopol Chemie Germany LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coa...展开 LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coatings with excellent haptic, crockmeter-resistance and resistance to hydrolysis. LIOPUR PFL 1964 based on polycarbonate is recommended as combination partner to improve resistance to hydrolysis. 收起
LIOPUR PFL 3046 Synthopol Chemie Germany LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, t...展开 LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. LIOPUR PFL 3046 exhibits very good water resistance and good ethanol resistance. The dispersion is recommended for combination with Liocryl acrylic emulsions. 收起
LIOPUR PFL 3242 Synthopol Chemie Germany LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. 收起
LIOPUR PFL 3526 Synthopol Chemie Germany LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transp...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. Coatings based on LIOPUR PFL 3526 exhibit excellent flame protection properties. This product shows a good wet and dry appearance on wood. 收起
LIOPUR PKS 2845 Synthopol Chemie Germany LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s fl...展开 LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s flexibility, even at low temperatures and resistance to hydrolysis LIOPUR PKS 2845 is especially recommended for making contact adhesives with good peel strength, used to laminate a wide range of materials. 收起
Liocryl XAM 2827 Synthopol Chemie Germany Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is ...展开 Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起
Liocryl XAM 5134 Synthopol Chemie Germany Liocryl XAM 5134 is an aqueous, self-crosslinking pure acrylic emulsion for 1-pack parquet and furniture varnishes. It is free of solvents, plasticisers, formaldehyde and APEOs and stands out with good chemical resistance.
Liocryl XAM 6979 Synthopol Chemie Germany Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet f...展开 Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet film clarity. 收起
MSN-002 Tayca Corporation MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSN-003 Tayca Corporation MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSN-007 Tayca Corporation MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-001 Tayca Corporation MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-005 Tayca Corporation MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-009 Tayca Corporation MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-012 Tayca Corporation MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MT-01 Tayca Corporation MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility.
MT-05 Tayca Corporation MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity.
MT-100AQ Tayca Corporation MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起