Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...展开 Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...展开 Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...展开 Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...展开 Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展开 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展开 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
SI-TUFF™ SB-050G | Advanced Composite Materials, LLC | SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resista...展开 SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. 收起 | |
SI-TUFF™ SB-300G | Advanced Composite Materials, LLC | SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductiv...展开 SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. 收起 | |
SI-TUFF™ SC-050 | Advanced Composite Materials, LLC | SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tem...展开 SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-110 | Advanced Composite Materials, LLC | SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...展开 SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-210 | Advanced Composite Materials, LLC | SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...展开 SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-300 | Advanced Composite Materials, LLC | SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tempera...展开 SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 |