| LIOPUR PFL 3242 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. 收起 | |
| LIOPUR PFL 3526 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transp...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. Coatings based on LIOPUR PFL 3526 exhibit excellent flame protection properties. This product shows a good wet and dry appearance on wood. 收起 | |
| LIOPUR PKS 2845 | Synthopol Chemie Germany | LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s fl...展开 LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s flexibility, even at low temperatures and resistance to hydrolysis LIOPUR PKS 2845 is especially recommended for making contact adhesives with good peel strength, used to laminate a wide range of materials. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
| MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
| MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| Ruikang R-938 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturin...展开 Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is recommended to be used in automobile paints for high quality results. 收起 | |
| Ruikang R-998 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coating...展开 Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coatings and inks. 收起 | |
| SYNTHALAN LS 768 | Synthopol Chemie Germany | SYNTHALAN LS 768 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in butylacetate. This acrylic resin is specifically designed as a paste binder, particularly for hard-to-disperse pigments. | |
| SYNTHALAT A 045 | Synthopol Chemie Germany | SYNTHALAT A 045 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weath...展开 SYNTHALAT A 045 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weathering resistance. 收起 | |
| SYNTHALAT A 055 | Synthopol Chemie Germany | SYNTHALAT A 055 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/butyl acetate. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component paints for indu...展开 SYNTHALAT A 055 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/butyl acetate. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component paints for industrial coatings with high flexibility, adhesion, and weathering resistance. 收起 | |
| SYNTHALAT A 060 | Synthopol Chemie Germany | SYNTHALAT A 060 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial p...展开 SYNTHALAT A 060 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial paints with good flexibility, adhesion, and resistance to weathering. 收起 | |
| SYNTHALAT A 065 | Synthopol Chemie Germany | SYNTHALAT A 065 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weatherin...展开 SYNTHALAT A 065 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weathering resistance. SYNTHALAT A 065 is used primarily in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals, wood and plastics. These types of 2 component coatings should be used preferably in instances where high coating qualities are required but where stoving is impossible due to the size or heat-sensitivity of the object to be coated. 收起 | |
| SYNTHALAT A 077 | Synthopol Chemie Germany | SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical a...展开 SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. 收起 | |
| SYNTHALAT A 078 | Synthopol Chemie Germany | SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to ch...展开 SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. 收起 | |
| SYNTHALAT A 085 | Synthopol Chemie Germany | SYNTHALAT A 085 is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial paints with good mechanical properties and chemical ...展开 SYNTHALAT A 085 is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial paints with good mechanical properties and chemical resistance. 收起 | |
| SYNTHALAT A 086 HS | Synthopol Chemie Germany | SYNTHALAT A 086 HS is a hydroxyfunctional acrylic resin. It is designed for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemical-, and weather-resistance for general industrial coa...展开 SYNTHALAT A 086 HS is a hydroxyfunctional acrylic resin. It is designed for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemical-, and weather-resistance for general industrial coatings. This product also offers quick drying and very good adhesion on different substrates and metals. 收起 | |
| SYNTHALAT A 088 MS | Synthopol Chemie Germany | SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering...展开 SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering good resistance to chemical attack and weathering. 收起 | |
| SYNTHALAT A 090 | Synthopol Chemie Germany | SYNTHALAT A 090 is a polyisocyanate-curing acrylic resin. It is supplied as 60% in xylene/butyl acetate (1:1). This product is designed for 2-pack coatings which are air- and oven-drying in combination with cycloaliphatic polyisocyanate adducts. It is pri...展开 SYNTHALAT A 090 is a polyisocyanate-curing acrylic resin. It is supplied as 60% in xylene/butyl acetate (1:1). This product is designed for 2-pack coatings which are air- and oven-drying in combination with cycloaliphatic polyisocyanate adducts. It is primarily used for coating plastics, as well as ABS copolymers. 收起 | |
| SYNTHALAT A 120 E | Synthopol Chemie Germany | SYNTHALAT A 120 E is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high abrasion resistance and high resistance to weatheri...展开 SYNTHALAT A 120 E is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high abrasion resistance and high resistance to weathering and chemicals for vehicles and industrial paints. 收起 | |
| SYNTHALAT A 125 HS | Synthopol Chemie Germany | SYNTHALAT A 125 HS is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for "high-solid" industrial coatings offering good mechanical strength ...展开 SYNTHALAT A 125 HS is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for "high-solid" industrial coatings offering good mechanical strength and resistance to chemical attack and weathering. 收起 | |
| SYNTHALAT A 135 N | Synthopol Chemie Germany | SYNTHALAT A 135 N is an acrylic resin cross-linking with polyisocyanate. It is supplied as 70% in butyl acetate. This product is recommended for use in combination with aliphatic polyisocyantes for air- and stove-drying two-component coatings for industri...展开 SYNTHALAT A 135 N is an acrylic resin cross-linking with polyisocyanate. It is supplied as 70% in butyl acetate. This product is recommended for use in combination with aliphatic polyisocyantes for air- and stove-drying two-component coatings for industrial coatings with good resistanc to chemicals and weathering. 收起 | |
| SYNTHALAT A 141 HS | Synthopol Chemie Germany | SYNTHALAT A 141 HS is an acrylic resin cross-linking with polyisocyanate having a high solids content. It is supplied as 70% in shellsol A/butyl acetate (2:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and ...展开 SYNTHALAT A 141 HS is an acrylic resin cross-linking with polyisocyanate having a high solids content. It is supplied as 70% in shellsol A/butyl acetate (2:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial coatings with high flexiblility, adhesion and weathering resistance. 收起 | |
| SYNTHALAT A 147 HS | Synthopol Chemie Germany | SYNTHALAT A 147 HS is a hydroxylgroup containing polyester/acrylic resin. It is supplied as 70% in butyl acetate/butyl glycol acetate (25:5). This product is recommended for use in combination with polyisocyanates air- and ovendrying 2-Pack high-solid cle...展开 SYNTHALAT A 147 HS is a hydroxylgroup containing polyester/acrylic resin. It is supplied as 70% in butyl acetate/butyl glycol acetate (25:5). This product is recommended for use in combination with polyisocyanates air- and ovendrying 2-Pack high-solid clear- and pigmented top coats for metals and plastics with high mechanical properties, high gloss and body, good weather- and chemical resistance. 收起 | |
| SYNTHALAT A 149 HS | Synthopol Chemie Germany | SYNTHALAT A 149 HS is a hydroxylgroup-containing, high-solid, polyester-containing acrylic resin. It is supplied as 77% in butyl acetate. This product is suitable for use in combination with polyisocyanates air- and ovendrying 2-Pack high-solid clear- and...展开 SYNTHALAT A 149 HS is a hydroxylgroup-containing, high-solid, polyester-containing acrylic resin. It is supplied as 77% in butyl acetate. This product is suitable for use in combination with polyisocyanates air- and ovendrying 2-Pack high-solid clear- and pigmented top coats for metals and plastics with high mechanical properties, quick physically drying, high gloss and body, excellent weather- and chemical resistance. 收起 | |
| SYNTHALAT A 150 | Synthopol Chemie Germany | SYNTHALAT A 150 is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings affording high mechanical strength, good adhesion ...展开 SYNTHALAT A 150 is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings affording high mechanical strength, good adhesion and resistance to weathering. 收起 | |
| SYNTHALAT A 150 S | Synthopol Chemie Germany | SYNTHALAT A 150 S is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/shellsol A/butyl acetate (2:1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-comp...展开 SYNTHALAT A 150 S is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/shellsol A/butyl acetate (2:1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high mechanical resistance and high resistance to chemicals and weathering. 收起 | |
| SYNTHALAT A 151 | Synthopol Chemie Germany | SYNTHALAT A 151 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% ig in xylene/shellsol A/butyl acetate (1:1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-com...展开 SYNTHALAT A 151 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% ig in xylene/shellsol A/butyl acetate (1:1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high mechanical resistance and high resistance to chemicals and weathering. 收起 | |
| SYNTHALAT A 156 HS | Synthopol Chemie Germany | SYNTHALAT A 156 HS is a polyisocyanate-curing high-solid acrylic resin. It is recommended for use in high-solid 2-pack coatings which are air- and oven-drying in combination with polyisocyanates, affording high strength and resistance to chemical attack a...展开 SYNTHALAT A 156 HS is a polyisocyanate-curing high-solid acrylic resin. It is recommended for use in high-solid 2-pack coatings which are air- and oven-drying in combination with polyisocyanates, affording high strength and resistance to chemical attack and weathering. The coatings are suitable in particular for large-capacity vehicles and cars, and for industrial coatings. 收起 | |
| SYNTHALAT A 1613 | Synthopol Chemie Germany | SYNTHALAT A 1613 is an acrylic resin crosslinkable with polyisocyanate. It is supplied as 45% in butyl acetate. This product is recommended for use in conjunction with aromatic and aliphatic polyisocyanates for air- and oven-drying two-component paints. I...展开 SYNTHALAT A 1613 is an acrylic resin crosslinkable with polyisocyanate. It is supplied as 45% in butyl acetate. This product is recommended for use in conjunction with aromatic and aliphatic polyisocyanates for air- and oven-drying two-component paints. It is mainly used for wood and plastic coatings. 收起 | |
| SYNTHALAT A 1633 | Synthopol Chemie Germany | SYNTHALAT A 1633 is an acrylic resin cross-linking with polyisocyanate. It is used in combination with aromatic and aliphatic polyisocyanates for fast drying 2-component polyurethane coatings, particularly suitable for coating furniture. | |
| SYNTHALAT A 1653 | Synthopol Chemie Germany | SYNTHALAT A 1653 is a polyisocyanate- curing acrylic resin. It is recommended for use in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-pack high-gloss, high-build polyurethane coatings, particularly suitable for coating furnitu...展开 SYNTHALAT A 1653 is a polyisocyanate- curing acrylic resin. It is recommended for use in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-pack high-gloss, high-build polyurethane coatings, particularly suitable for coating furniture. 收起 | |
| SYNTHALAT A 190 | Synthopol Chemie Germany | SYNTHALAT A 190 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A/butyl acetate (1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air drying and stoving metal coatings. Th...展开 SYNTHALAT A 190 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A/butyl acetate (1:1). This product is recommended for use in combination with aliphatic polyisocyanates for air drying and stoving metal coatings. These types of 2-C coatings are preferable wherever maximum resistance to chemicals, abrasion and weathering are required. 收起 | |
| SYNTHALAT A 191 | Synthopol Chemie Germany | SYNTHALAT A 191 is an acrylic resin cross-linking with polyisocyanate. It is suitable for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings. These types of 2-component paints should be used preferably where...展开 SYNTHALAT A 191 is an acrylic resin cross-linking with polyisocyanate. It is suitable for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings. These types of 2-component paints should be used preferably wherever maximum resistance to chemicals and weathering are required. 收起 | |
| SYNTHALAT A 192 | Synthopol Chemie Germany | SYNTHALAT A 192 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in ethoxy propyl acetate. This product is suitable for use in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals. These type...展开 SYNTHALAT A 192 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in ethoxy propyl acetate. This product is suitable for use in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals. These types of two-component coatings are preferable wherever maximum resistance to chemicals and weathering are required. 收起 | |
| SYNTHALAT A 200 | Synthopol Chemie Germany | SYNTHALAT A 200 is an acrylic/epoxide resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air-drying and oven-drying two-component primers with excellent filling properties, quick drying and goo...展开 SYNTHALAT A 200 is an acrylic/epoxide resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air-drying and oven-drying two-component primers with excellent filling properties, quick drying and good adhesion to steel, aluminium and zinc that give good results in the condensed moisture test and salt spray test. These types of two-component primers are used preferably wherever maximum corrosion resistance and adhesion are required. 收起 | |
| SYNTHALAT A 333 | Synthopol Chemie Germany | SYNTHALAT A 333 is a modified thermoplastic acrylic resin. It is supplied as 50% in xylene/butanol (2:1). This product is recommended for use as a sole binder, primarily in plastics. | |
| SYNTHALAT A 397 | Synthopol Chemie Germany | SYNTHALAT A 397 is an air-drying alkyd-modified acrylic resin. It is supplied as 60% in white spirit K 30. This product is recommended for use in fast-drying industrial coatings with good weathering resistance, and for air-drying and forced stove-drying. | |
| SYNTHALAT A 587 | Synthopol Chemie Germany | SYNTHALAT A 587 is a thermoplastic acrylic resin. It is supplied as 60% in white spirit K 30. This product is recommended for use as a binder for cement facing hardeners and low viscosity primers. | |
| SYNTHALAT A 597 | Synthopol Chemie Germany | SYNTHALAT A 597 is a thermoplastic acrylic resin. It gives good results as the sole binder for the manufacture of primers for problem substrates such as zinc. Unlike most other physically drying binders, it does not require the addition of any plasticizer...展开 SYNTHALAT A 597 is a thermoplastic acrylic resin. It gives good results as the sole binder for the manufacture of primers for problem substrates such as zinc. Unlike most other physically drying binders, it does not require the addition of any plasticizers. 收起 | |
| SYNTHALAT A 600 | Synthopol Chemie Germany | SYNTHALAT A 600 is a thermosetting, self-crosslinking acrylic resin. It is a binder for stoving finishes with good adhesion, high resistance of chemicals and high color stability. This product is used primarily as the sole binder for the manufacture of on...展开 SYNTHALAT A 600 is a thermosetting, self-crosslinking acrylic resin. It is a binder for stoving finishes with good adhesion, high resistance of chemicals and high color stability. This product is used primarily as the sole binder for the manufacture of one-coat paints. It is used for enamelling of household appliances, such as refrigerators and washing machines, medical appliances, lamps, and boilers. 收起 | |
| SYNTHALAT A 645 | Synthopol Chemie Germany | SYNTHALAT A 645 is a heat-reactive self-curing acrylic resin. It is supplied as 50% in xylene/butanol (1:1). This product is recommended for high-flexibility stoving paints with good adhesion. | |
| SYNTHALAT A 756 | Synthopol Chemie Germany | SYNTHALAT A 756 is a heat-reactive acrylic resin cross-linkable with melamine resin, after neutralization dilutable with water. It is suitable for use in anaphoretic electro-dip coatings as well as for conventional stoving area. | |
| Synthalat A-BWH 2172 | Synthopol Chemie Germany | Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion o...展开 Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion on steel can be achieved. 收起 | |
| SYNTHALAT A-HD 6387 | Synthopol Chemie Germany | SYNTHALAT A-HD 6387 is a silicon-modified high-solids acrylic resin. It can be combined with polyisocyantes, and is suitable for air- and oven-drying high-solids 2-pack coatings with high resistance values for chemicals and weathering. | |
| SYNTHALAT A-HD 6499 | Synthopol Chemie Germany | SYNTHALAT A-HD 6499 is a thermoplastic acrylic resin. It is supplied as 55% in white spirit K 30. This product is used as a binder for cement plaster setting agents and filling primers with hard coating films. | |
| SYNTHALAT A-HD 8199 | Synthopol Chemie Germany | SYNTHALAT A-HD 8199 is a polyisocyanate curing high-solids acrylic resin. It is supplied as 70% in Shellsol A/butyl acetate (1:1). This product is recommended for 2-pack high-solids furniture topcoats with high initial gloss. | |
| SYNTHALAT A-JB 772 | Synthopol Chemie Germany | SYNTHALAT A-JB 772 is a water soluble, polyisocyanate curable acrylic resin. It is recommended for waterborne 1 component and 2 component clear- and top-coats with a good chemical resistance and excellent oven-drying properties. | |
| SYNTHALAT A-TH 1141 | Synthopol Chemie Germany | SYNTHALAT A-TH 1141 is a hydroxyl group containing, high-solid, polyester-containing acrylic resin. It is recommended for use in combination with polyisocyanates air- and ovendrying 2-pack high-solid clear- and pigmented top coats for metals and plastics ...展开 SYNTHALAT A-TH 1141 is a hydroxyl group containing, high-solid, polyester-containing acrylic resin. It is recommended for use in combination with polyisocyanates air- and ovendrying 2-pack high-solid clear- and pigmented top coats for metals and plastics with high mechanical properties. It is quick-drying, and has high gloss and body as well as excellent weather- and chemical resistance. 收起 | |
| SYNTHALAT A-TS 1400 | Synthopol Chemie Germany | SYNTHALAT A-TS 1400 is a polyisocyanate crosslinkable acrylic resin. It is supplied as 40% in butyl acetate. Combined with polyisocyanates, it is suitable for air-drying 2-pack coatings for the furniture sector with very fast physical drying and good resi...展开 SYNTHALAT A-TS 1400 is a polyisocyanate crosslinkable acrylic resin. It is supplied as 40% in butyl acetate. Combined with polyisocyanates, it is suitable for air-drying 2-pack coatings for the furniture sector with very fast physical drying and good resistance to yellowing. 收起 | |
| SYNTHALAT A-TS 1558 | Synthopol Chemie Germany | SYNTHALAT A-TS 1558 is a thermoplastic acrylic resin. It is supplied as 50% in butyl acetate. It is used as a physically drying sole binder, mainly for plastic and metal substrates with fast drying and good petrol resistance. | |
| SYNTHALAT A-TS 1603 | Synthopol Chemie Germany | SYNTHALAT A-TS 1603 is a polyisocyanate curing high-solids acrylic resin. It is supplied as 65% in xylene/butyl acetate. This product is used for 20pack high-solids industrial topcoats with airless processing and good chemical resistance. | |
| SYNTHALAT A-TS 1857 | Synthopol Chemie Germany | SYNTHALAT A-TS 1857 is a thermoplastic acrylic resin. It is supplied as 50% in Shellsol A. This product is recommended for use as a physically drying sole binder, mainly for plastic and metal substrates with fast drying and good petrol resistance. | |
| SYNTHALAT A-TS 2104 | Synthopol Chemie Germany | SYNTHALAT A-TS 2104 is a thermoplastic acrylic resin. It is supplied as 60% ig in butyl acetate. This acrylic resin can be used for surfacers and top coats. It offers good adhesion on difficult substrates, such as zinc. Compared with most other physically...展开 SYNTHALAT A-TS 2104 is a thermoplastic acrylic resin. It is supplied as 60% ig in butyl acetate. This acrylic resin can be used for surfacers and top coats. It offers good adhesion on difficult substrates, such as zinc. Compared with most other physically-drying resins, it is not necassary to blend with softening agents. 收起 | |
| SYNTHALAT A-TS 3277 | Synthopol Chemie Germany | SYNTHALAT A-TS 3277 is a polyisocyanate curing acrylic resin. It is supplied as 60% in Shellsol A. Similar to SYNTHALAT A 077, it offers better weathering resistance. | |
| SYNTHALAT A-TS 3371 | Synthopol Chemie Germany | SYNTHALAT A-TS 3371 is a powdered acrylic resin containing hydroxyl groups. It is recommended for curing with amino resins and/or blocked isocyanates. This product is also used for weathering- and chemical-resistant stoved coatings with stoving temperatur...展开 SYNTHALAT A-TS 3371 is a powdered acrylic resin containing hydroxyl groups. It is recommended for curing with amino resins and/or blocked isocyanates. This product is also used for weathering- and chemical-resistant stoved coatings with stoving temperatures above 120°C. 收起 | |
| SYNTHALAT A-TS 3392 | Synthopol Chemie Germany | SYNTHALAT A-TS 3392 is a thermoplastic high-solid acrylic resin. It is supplied as 75% in ethyl acetate/butyl acetate (20:5). This highly elastic high-solids acrylic resin is suitable for sealants in the construction sector. | |
| SYNTHALAT A-TS 3411 | Synthopol Chemie Germany | SYNTHALAT A-TS 3411 is an acrylic resin curable with melamine resin and containing carboxy groups. It is a thermosetting, carboxylated resin for powder coatings. Above 120°C, this product is crosslinkable with amino- and/or epoxylated hardeners with good ...展开 SYNTHALAT A-TS 3411 is an acrylic resin curable with melamine resin and containing carboxy groups. It is a thermosetting, carboxylated resin for powder coatings. Above 120°C, this product is crosslinkable with amino- and/or epoxylated hardeners with good weather- and chemical-resistance. 收起 | |
| SYNTHALAT A-TS 3737 | Synthopol Chemie Germany | SYNTHALAT A-TS 3737 is a hydroxyfunctional acrylic resin. It is supplied as 70% in butylacetate. This product is recommended for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemica...展开 SYNTHALAT A-TS 3737 is a hydroxyfunctional acrylic resin. It is supplied as 70% in butylacetate. This product is recommended for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemical- and weather-resistance for general industrial coatings. It is quick-drying and offers good adhesion on different substrates and metals. 收起 | |
| SYNTHALAT A-TS 4330 | Synthopol Chemie Germany | SYNTHALAT A-TS 4330 is a polyisocyanate crosslinkable, high solid acrylic resin. It is supplied as 60% in butyl acetate. This product is recommended for use in combination with aromatic and aliphatic polyisocyanates for quick drying 2 pack-HS polyurethane...展开 SYNTHALAT A-TS 4330 is a polyisocyanate crosslinkable, high solid acrylic resin. It is supplied as 60% in butyl acetate. This product is recommended for use in combination with aromatic and aliphatic polyisocyanates for quick drying 2 pack-HS polyurethane coatings with high gloss and wetting, especially for furniture paints. 收起 |
